mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 10:30:32 +00:00
d2e1cc69a2
The OrangePi Zero 3 is a small development board featuring the Allwinner H618 SoC, shipping with up to 4GB of DRAM, Gigabit Ethernet, a micro-HDMI connector and two USB sockets. The board uses LPDDR4 DRAM and an X-Powers AXP313a PMIC, support for which was recently added to U-Boot. Add a defconfig file selecting the right drivers and DRAM options. Since the .dts file was synced from the Linux kernel repo already, we just need to add one line to the Makefile to actually build the .dtb. The DRAM parameters were derived from the values found in the BSP DRAM drivers on the SPI NOR flash. Signed-off-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Mikhail Kalashnikov <iuncuim@gmail.com> Tested-by: Bob McChesney <bob@electricworry.net> Tested-by: Stephen Graf <stephen.graf@gmail.com>
32 lines
919 B
Text
32 lines
919 B
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_SUNXI=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="sun50i-h618-orangepi-zero3"
|
|
CONFIG_SPL=y
|
|
CONFIG_DRAM_SUN50I_H616_DX_ODT=0x07070707
|
|
CONFIG_DRAM_SUN50I_H616_DX_DRI=0x0e0e0e0e
|
|
CONFIG_DRAM_SUN50I_H616_CA_DRI=0x0e0e
|
|
CONFIG_DRAM_SUN50I_H616_ODT_EN=0xaaaaeeee
|
|
CONFIG_DRAM_SUN50I_H616_TPR6=0x44000000
|
|
CONFIG_DRAM_SUN50I_H616_TPR10=0x402f6663
|
|
CONFIG_DRAM_SUN50I_H616_TPR11=0x24242624
|
|
CONFIG_DRAM_SUN50I_H616_TPR12=0x0f0f100f
|
|
CONFIG_MACH_SUN50I_H616=y
|
|
CONFIG_SUNXI_DRAM_H616_LPDDR4=y
|
|
CONFIG_DRAM_CLK=792
|
|
CONFIG_USB1_VBUS_PIN="PC16"
|
|
CONFIG_R_I2C_ENABLE=y
|
|
CONFIG_SPL_SPI_SUNXI=y
|
|
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
|
CONFIG_SPL_I2C=y
|
|
CONFIG_SPL_SYS_I2C_LEGACY=y
|
|
CONFIG_SYS_I2C_MVTWSI=y
|
|
CONFIG_SYS_I2C_SLAVE=0x7f
|
|
CONFIG_SYS_I2C_SPEED=400000
|
|
CONFIG_SPI_FLASH_ZBIT=y
|
|
CONFIG_PHY_MOTORCOMM=y
|
|
CONFIG_SUN8I_EMAC=y
|
|
CONFIG_AXP313_POWER=y
|
|
CONFIG_SPI=y
|
|
CONFIG_USB_EHCI_HCD=y
|
|
CONFIG_USB_OHCI_HCD=y
|
|
CONFIG_USB_MUSB_GADGET=y
|