mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-24 16:32:20 +00:00
eaf6ea6a1d
- Make all users of CUSTOM_SYS_INIT_SP_ADDR reference SYS_INIT_SP_ADDR - Introduce HAS_CUSTOM_SYS_INIT_SP_ADDR to allow for setting the stack pointer directly, otherwise we use the common calculation. - On some platforms that were using the standard calculation but did not set CONFIG_SYS_INIT_RAM_SIZE / CONFIG_SYS_INIT_RAM_ADDR, set them. - On a small number of platforms that were not subtracting GENERATED_GBL_DATA_SIZE do so now via the standard calculation. - CONFIG_SYS_INIT_SP_OFFSET is now widely unused, so remove it from most board config header files. Signed-off-by: Tom Rini <trini@konsulko.com>
76 lines
2 KiB
C
76 lines
2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Board configuration file for Dragonboard 410C
|
|
*
|
|
* (C) Copyright 2015 Mateusz Kulikowski <mateusz.kulikowski@gmail.com>
|
|
*/
|
|
|
|
#ifndef __CONFIGS_DRAGONBOARD410C_H
|
|
#define __CONFIGS_DRAGONBOARD410C_H
|
|
|
|
#include <linux/sizes.h>
|
|
#include <asm/arch/sysmap-apq8016.h>
|
|
|
|
/* Build new ELF image from u-boot.bin (U-Boot + appended DTB) */
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM_1 0x80000000
|
|
/* Note: 8 MiB (0x86000000 - 0x86800000) are reserved for tz/smem/hyp/rmtfs/rfsa */
|
|
#define PHYS_SDRAM_1_SIZE SZ_1G
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
|
|
#define CONFIG_SYS_BOOTM_LEN SZ_64M
|
|
|
|
/* UART */
|
|
|
|
/* Fixup - in init code we switch from device to host mode,
|
|
* it has to be done after each HCD reset */
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
|
|
|
|
#define BOOT_TARGET_DEVICES(func) \
|
|
func(USB, usb, 0) \
|
|
func(MMC, mmc, 1) \
|
|
func(MMC, mmc, 0) \
|
|
func(DHCP, dhcp, na)
|
|
|
|
#include <config_distro_bootcmd.h>
|
|
|
|
/* Does what recovery does */
|
|
#define REFLASH(file, part) \
|
|
"part start mmc 0 "#part" start && "\
|
|
"part size mmc 0 "#part" size && "\
|
|
"tftp $loadaddr "#file" && " \
|
|
"mmc write $loadaddr $start $size && "
|
|
|
|
#define CONFIG_ENV_REFLASH \
|
|
"mmc dev 0 && "\
|
|
"usb start && "\
|
|
"dhcp && "\
|
|
"tftp $loadaddr dragonboard/rescue/gpt_both0.bin && "\
|
|
"mmc write $loadaddr 0 43 && " \
|
|
"mmc rescan && "\
|
|
REFLASH(dragonboard/rescue/NON-HLOS.bin, 1)\
|
|
REFLASH(dragonboard/rescue/sbl1.mbn, 2)\
|
|
REFLASH(dragonboard/rescue/rpm.mbn, 3)\
|
|
REFLASH(dragonboard/rescue/tz.mbn, 4)\
|
|
REFLASH(dragonboard/rescue/hyp.mbn, 5)\
|
|
REFLASH(dragonboard/rescue/sec.dat, 6)\
|
|
REFLASH(dragonboard/rescue/emmc_appsboot.mbn, 7)\
|
|
REFLASH(dragonboard/u-boot.img, 8)\
|
|
"usb stop &&"\
|
|
"echo Reflash completed"
|
|
|
|
/* Environment */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"reflash="CONFIG_ENV_REFLASH"\0"\
|
|
"loadaddr=0x81000000\0" \
|
|
"initrd_high=0xffffffffffffffff\0" \
|
|
"linux_image=Image\0" \
|
|
"kernel_addr_r=0x81000000\0"\
|
|
"fdtfile=qcom/apq8016-sbc.dtb\0" \
|
|
"fdt_addr_r=0x83000000\0"\
|
|
"ramdisk_addr_r=0x84000000\0"\
|
|
"scriptaddr=0x90000000\0"\
|
|
"pxefile_addr_r=0x90100000\0"\
|
|
BOOTENV
|
|
|
|
#endif
|