u-boot/board/freescale/lx2160a/eth_lx2160ardb.c
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00

214 lines
5.2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2018, 2020 NXP
*
*/
#include <common.h>
#include <command.h>
#include <fdt_support.h>
#include <net.h>
#include <netdev.h>
#include <malloc.h>
#include <fsl_mdio.h>
#include <miiphy.h>
#include <phy.h>
#include <fm_eth.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <exports.h>
#include <asm/arch/fsl_serdes.h>
#include <fsl-mc/fsl_mc.h>
#include <fsl-mc/ldpaa_wriop.h>
#include "lx2160a.h"
DECLARE_GLOBAL_DATA_PTR;
static bool get_inphi_phy_id(struct mii_dev *bus, int addr, int devad)
{
int phy_reg;
u32 phy_id;
phy_reg = bus->read(bus, addr, devad, MII_PHYSID1);
phy_id = (phy_reg & 0xffff) << 16;
phy_reg = bus->read(bus, addr, devad, MII_PHYSID2);
phy_id |= (phy_reg & 0xffff);
if (phy_id == PHY_UID_IN112525_S03)
return true;
else
return false;
}
int board_eth_init(struct bd_info *bis)
{
#if defined(CONFIG_FSL_MC_ENET)
struct memac_mdio_info mdio_info;
struct memac_mdio_controller *reg;
int i, interface;
struct mii_dev *dev;
struct ccsr_gur *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR);
u32 srds_s1;
srds_s1 = in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK;
srds_s1 >>= FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO1;
mdio_info.regs = reg;
mdio_info.name = DEFAULT_WRIOP_MDIO1_NAME;
/* Register the EMI 1 */
fm_memac_mdio_init(bis, &mdio_info);
reg = (struct memac_mdio_controller *)CONFIG_SYS_FSL_WRIOP1_MDIO2;
mdio_info.regs = reg;
mdio_info.name = DEFAULT_WRIOP_MDIO2_NAME;
/* Register the EMI 2 */
fm_memac_mdio_init(bis, &mdio_info);
dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
switch (srds_s1) {
case 19:
wriop_set_phy_address(WRIOP1_DPMAC2, 0,
CORTINA_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC3, 0,
AQR107_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC4, 0,
AQR107_PHY_ADDR2);
if (get_inphi_phy_id(dev, INPHI_PHY_ADDR1, MDIO_MMD_VEND1)) {
wriop_set_phy_address(WRIOP1_DPMAC5, 0,
INPHI_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC6, 0,
INPHI_PHY_ADDR1);
}
wriop_set_phy_address(WRIOP1_DPMAC17, 0,
RGMII_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC18, 0,
RGMII_PHY_ADDR2);
break;
case 18:
wriop_set_phy_address(WRIOP1_DPMAC7, 0,
CORTINA_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC8, 0,
CORTINA_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC9, 0,
CORTINA_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC10, 0,
CORTINA_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC3, 0,
AQR107_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC4, 0,
AQR107_PHY_ADDR2);
if (get_inphi_phy_id(dev, INPHI_PHY_ADDR1, MDIO_MMD_VEND1)) {
wriop_set_phy_address(WRIOP1_DPMAC5, 0,
INPHI_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC6, 0,
INPHI_PHY_ADDR1);
}
wriop_set_phy_address(WRIOP1_DPMAC17, 0,
RGMII_PHY_ADDR1);
wriop_set_phy_address(WRIOP1_DPMAC18, 0,
RGMII_PHY_ADDR2);
break;
default:
printf("SerDes1 protocol 0x%x is not supported on LX2160ARDB\n",
srds_s1);
goto next;
}
for (i = WRIOP1_DPMAC2; i <= WRIOP1_DPMAC10; i++) {
interface = wriop_get_enet_if(i);
switch (interface) {
case PHY_INTERFACE_MODE_XGMII:
dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
wriop_set_mdio(i, dev);
break;
case PHY_INTERFACE_MODE_25G_AUI:
dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
wriop_set_mdio(i, dev);
break;
case PHY_INTERFACE_MODE_XLAUI:
dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
wriop_set_mdio(i, dev);
break;
default:
break;
}
}
for (i = WRIOP1_DPMAC17; i <= WRIOP1_DPMAC18; i++) {
interface = wriop_get_enet_if(i);
switch (interface) {
case PHY_INTERFACE_MODE_RGMII:
case PHY_INTERFACE_MODE_RGMII_ID:
dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO1_NAME);
wriop_set_mdio(i, dev);
break;
default:
break;
}
}
next:
cpu_eth_init(bis);
#endif /* CONFIG_FSL_MC_ENET */
#ifdef CONFIG_PHY_AQUANTIA
/*
* Export functions to be used by AQ firmware
* upload application
*/
gd->jt->strcpy = strcpy;
gd->jt->mdelay = mdelay;
gd->jt->mdio_get_current_dev = mdio_get_current_dev;
gd->jt->phy_find_by_mask = phy_find_by_mask;
gd->jt->mdio_phydev_for_ethname = mdio_phydev_for_ethname;
gd->jt->miiphy_set_current_dev = miiphy_set_current_dev;
#endif
return pci_eth_init(bis);
}
#if defined(CONFIG_RESET_PHY_R)
void reset_phy(void)
{
#if defined(CONFIG_FSL_MC_ENET)
mc_env_boot();
#endif
}
#endif /* CONFIG_RESET_PHY_R */
int fdt_fixup_board_phy(void *fdt)
{
int mdio_offset;
int ret;
struct mii_dev *dev;
ret = 0;
dev = miiphy_get_dev_by_name(DEFAULT_WRIOP_MDIO2_NAME);
if (!get_inphi_phy_id(dev, INPHI_PHY_ADDR1, MDIO_MMD_VEND1)) {
mdio_offset = fdt_path_offset(fdt, "/soc/mdio@0x8B97000");
if (mdio_offset < 0)
mdio_offset = fdt_path_offset(fdt, "/mdio@0x8B97000");
if (mdio_offset < 0) {
printf("mdio@0x8B9700 node not found in dts\n");
return mdio_offset;
}
ret = fdt_setprop_string(fdt, mdio_offset, "status",
"disabled");
if (ret) {
printf("Could not set disable mdio@0x8B97000 %s\n",
fdt_strerror(ret));
return ret;
}
}
return ret;
}