u-boot/include/configs/rk3188_common.h
Philipp Tomsich f40574e2d7 Kconfig: Migrate CONFIG_BAUDRATE
Move this in to Kconfig with a default of 115200.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
[trini: Run moveconfig.py, reword commit slightly]
Signed-off-by: Tom Rini <trini@konsulko.com>
2017-03-19 14:48:37 -04:00

119 lines
3.1 KiB
C

/*
* (C) Copyright 2015 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __CONFIG_RK3188_COMMON_H
#define __CONFIG_RK3188_COMMON_H
#define CONFIG_SYS_CACHELINE_SIZE 64
#include <asm/arch/hardware.h>
#include "rockchip-common.h"
#define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
#define CONFIG_NR_DRAM_BANKS 1
#define CONFIG_ENV_SIZE 0x2000
#define CONFIG_SYS_MAXARGS 16
#define CONFIG_SYS_MALLOC_LEN (32 << 20)
#define CONFIG_SYS_CBSIZE 1024
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_SYS_TIMER_RATE (24 * 1000 * 1000)
#define CONFIG_SYS_TIMER_BASE 0x2000e000 /* TIMER3 */
#define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMER_BASE + 8)
#define CONFIG_SYS_TIMER_COUNTS_DOWN
#define CONFIG_SYS_NS16550_MEM32
#define CONFIG_SPL_BOARD_INIT
#ifdef CONFIG_ROCKCHIP_SPL_BACK_TO_BROM
/* Bootrom will load u-boot binary to 0x60000000 once return from SPL */
#define CONFIG_SYS_TEXT_BASE 0x60000000
#else
#define CONFIG_SYS_TEXT_BASE 0x60100000
#endif
#define CONFIG_SYS_INIT_SP_ADDR 0x60100000
#define CONFIG_SYS_LOAD_ADDR 0x60800800
#define CONFIG_ROCKCHIP_MAX_INIT_SIZE (0x8000 - 0x800)
#define CONFIG_ROCKCHIP_CHIP_TAG "RK31"
#ifdef CONFIG_TPL_BUILD
#define CONFIG_SPL_TEXT_BASE 0x10080804
/* tpl size 1kb - 4byte RK31 header */
#define CONFIG_SPL_MAX_SIZE (0x400 - 0x4)
#elif defined(CONFIG_SPL_BUILD)
/* spl size 32kb sram - 2kb bootrom - 1kb spl */
#define CONFIG_SPL_MAX_SIZE (0x8000 - 0xC00)
#define CONFIG_SPL_TEXT_BASE 0x10080C00
#define CONFIG_SPL_FRAMEWORK 1
#define CONFIG_SPL_CLK 1
#define CONFIG_SPL_PINCTRL 1
#define CONFIG_SPL_REGMAP 1
#define CONFIG_SPL_SYSCON 1
#define CONFIG_SPL_RAM 1
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT 1
#define CONFIG_ROCKCHIP_SERIAL 1
#endif
#define CONFIG_SPL_STACK 0x10087fff
/* MMC/SD IP block */
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_FAT_WRITE
#define CONFIG_SYS_SDRAM_BASE 0x60000000
#define CONFIG_NR_DRAM_BANKS 1
#define SDRAM_BANK_SIZE (2UL << 30)
#define CONFIG_SPI_FLASH
#define CONFIG_SPI
#define CONFIG_SF_DEFAULT_SPEED 20000000
#ifndef CONFIG_SPL_BUILD
/* usb otg */
#define CONFIG_USB_GADGET
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_GADGET_DWC2_OTG
#define CONFIG_ROCKCHIP_USB2_PHY
#define CONFIG_USB_GADGET_VBUS_DRAW 0
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_G_DNL_MANUFACTURER "Rockchip"
#define CONFIG_G_DNL_VENDOR_NUM 0x2207
#define CONFIG_G_DNL_PRODUCT_NUM 0x310a
/* usb host support */
#ifdef CONFIG_CMD_USB
#define CONFIG_USB_DWC2
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_ETHER_ASIX
#endif
#define ENV_MEM_LAYOUT_SETTINGS \
"scriptaddr=0x60000000\0" \
"pxefile_addr_r=0x60100000\0" \
"fdt_addr_r=0x61f00000\0" \
"kernel_addr_r=0x62000000\0" \
"ramdisk_addr_r=0x64000000\0"
#include <config_distro_bootcmd.h>
/* Linux fails to load the fdt if it's loaded above 256M on a Rock board,
* so limit the fdt reallocation to that */
#define CONFIG_EXTRA_ENV_SETTINGS \
"fdt_high=0x6fffffff\0" \
"initrd_high=0x6fffffff\0" \
"partitions=" PARTS_DEFAULT \
ENV_MEM_LAYOUT_SETTINGS \
ROCKCHIP_DEVICE_SETTINGS \
BOOTENV
#endif /* CONFIG_SPL_BUILD */
#define CONFIG_PREBOOT
#endif