mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
123 lines
3.3 KiB
C
123 lines
3.3 KiB
C
/*
|
|
* (C) Copyright 2004
|
|
* Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
|
|
*
|
|
* (C) Copyright 2003
|
|
* Texas Instruments, <www.ti.com>
|
|
* Kshitij Gupta <Kshitij@ti.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static void flash__init (void);
|
|
static void ether__init (void);
|
|
|
|
static inline void delay (unsigned long loops)
|
|
{
|
|
__asm__ volatile ("1:\n"
|
|
"subs %0, %1, #1\n"
|
|
"bne 1b":"=r" (loops):"0" (loops));
|
|
}
|
|
|
|
/*
|
|
* Miscellaneous platform dependent initialisations
|
|
*/
|
|
|
|
int board_init (void)
|
|
{
|
|
/* arch number of SX1 Board */
|
|
gd->bd->bi_arch_number = MACH_TYPE_SX1;
|
|
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = 0x10000100;
|
|
|
|
/* kk - this speeds up your boot a quite a bit. However to make it
|
|
* work, you need make sure your kernel startup flush bug is fixed.
|
|
* ... rkw ...
|
|
*/
|
|
icache_enable ();
|
|
|
|
flash__init ();
|
|
ether__init ();
|
|
return 0;
|
|
}
|
|
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
/* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
|
|
/* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
|
|
|
|
/* setup gpio direction to match board (no floats!) */
|
|
/**gdir = 0xCFF9; */
|
|
/**mdir = 0x103F; */
|
|
|
|
return (0);
|
|
}
|
|
|
|
/******************************
|
|
Routine:
|
|
Description:
|
|
******************************/
|
|
static void flash__init (void)
|
|
{
|
|
#define CS0_CHIP_SELECT_REG 0xfffecc10
|
|
#define CS3_CHIP_SELECT_REG 0xfffecc1c
|
|
#define EMIFS_GlB_Config_REG 0xfffecc0c
|
|
|
|
unsigned int regval;
|
|
|
|
regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
|
|
regval = regval | 0x0001; /* Turn off write protection for flash devices. */
|
|
if (regval & 0x0002) {
|
|
regval = regval & 0xfffd; /* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
|
|
/* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
|
|
/* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
|
|
/* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
|
|
}
|
|
*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
|
|
}
|
|
|
|
|
|
/******************************
|
|
Routine:
|
|
Description:
|
|
******************************/
|
|
static void ether__init (void)
|
|
{
|
|
#define ETH_CONTROL_REG 0x0800000b
|
|
/* take the Ethernet controller out of reset and wait
|
|
* for the EEPROM load to complete.
|
|
*/
|
|
*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
|
|
udelay (3);
|
|
}
|
|
|
|
|
|
int dram_init (void)
|
|
{
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
|
|
return 0;
|
|
}
|