mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 06:12:58 +00:00
b60eff31f3
Remove the last uses of symbol offsets in ARM U-Boot. Remove some needless uses of _TEXT_BASE. Remove all _TEXT_BASE definitions. Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
502 lines
13 KiB
ArmAsm
502 lines
13 KiB
ArmAsm
/*
|
|
* Memory Setup stuff - taken from blob memsetup.S
|
|
*
|
|
* Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl) and
|
|
* Jan-Derk Bakker (J.D.Bakker@its.tudelft.nl)
|
|
*
|
|
* Modified for MPL VCMA9 by
|
|
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
|
|
* (C) Copyright 2002, 2003, 2004, 2005
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
|
|
#include <config.h>
|
|
#include <version.h>
|
|
|
|
|
|
/* register definitions */
|
|
|
|
#define PLD_BASE 0x28000000
|
|
#define MISC_REG 0x103
|
|
#define SDRAM_REG 0x106
|
|
#define BWSCON 0x48000000
|
|
#define CLKBASE 0x4C000000
|
|
#define LOCKTIME 0x0
|
|
#define MPLLCON 0x4
|
|
#define UPLLCON 0x8
|
|
#define GPIOBASE 0x56000000
|
|
#define GSTATUS1 0xB0
|
|
#define FASTCPU 0x02
|
|
|
|
/* some parameters for the board */
|
|
/* BWSCON */
|
|
#define DW8 (0x0)
|
|
#define DW16 (0x1)
|
|
#define DW32 (0x2)
|
|
#define WAIT (0x1<<2)
|
|
#define UBLB (0x1<<3)
|
|
|
|
/* BANKSIZE */
|
|
#define BURST_EN (0x1<<7)
|
|
|
|
/* BANK0CON 200 */
|
|
#define B0_Tacs_200 0x0 /* 0clk (or 0x1 1clk) */
|
|
#define B0_Tcos_200 0x1 /* 1clk (or 0x2 2clk) */
|
|
#define B0_Tacc_200 0x5 /* 8clk (or 0x6 10clk) */
|
|
#define B0_Tcoh_200 0x0 /* 0clk */
|
|
#define B0_Tcah_200 0x3 /* 4clk (or0x01 1clk) */
|
|
#define B0_Tacp_200 0x0 /* page mode is not used */
|
|
#define B0_PMC_200 0x0 /* page mode disabled */
|
|
|
|
/* BANK0CON 250 */
|
|
#define B0_Tacs_250 0x0 /* 0clk (or 0x1 1clk) */
|
|
#define B0_Tcos_250 0x1 /* 1clk (or 0x2 2clk) */
|
|
#define B0_Tacc_250 0x5 /* 8clk (or 0x7 14clk) */
|
|
#define B0_Tcoh_250 0x0 /* 0clk */
|
|
#define B0_Tcah_250 0x3 /* 4clk (or 0x1 1clk) */
|
|
#define B0_Tacp_250 0x0 /* page mode is not used */
|
|
#define B0_PMC_250 0x0 /* page mode disabled */
|
|
|
|
/* BANK0CON 266 */
|
|
#define B0_Tacs_266 0x0 /* 0clk (or 0x1 1clk) */
|
|
#define B0_Tcos_266 0x1 /* 1clk (or 0x2 2clk) */
|
|
#define B0_Tacc_266 0x6 /* 10clk (or 0x7 14clk) */
|
|
#define B0_Tcoh_266 0x0 /* 0clk */
|
|
#define B0_Tcah_266 0x3 /* 4clk (or 0x1 1clk) */
|
|
#define B0_Tacp_266 0x0 /* page mode is not used */
|
|
#define B0_PMC_266 0x0 /* page mode disabled */
|
|
|
|
/* BANK1CON 200 */
|
|
#define B1_Tacs_200 0x0 /* 0clk (or 0x1 1clk) */
|
|
#define B1_Tcos_200 0x1 /* 1clk (or 0x2 2clk) */
|
|
#define B1_Tacc_200 0x5 /* 8clk (or 0x6 10clk) */
|
|
#define B1_Tcoh_200 0x0 /* 0clk */
|
|
#define B1_Tcah_200 0x3 /* 4clk (or 0x1 1clk) */
|
|
#define B1_Tacp_200 0x0 /* page mode is not used */
|
|
#define B1_PMC_200 0x0 /* page mode disabled */
|
|
|
|
/* BANK1CON 250 */
|
|
#define B1_Tacs_250 0x0 /* 0clk (or 0x1 1clk) */
|
|
#define B1_Tcos_250 0x1 /* 1clk (or 0x2 2clk) */
|
|
#define B1_Tacc_250 0x5 /* 8clk (or 0x7 14clk) */
|
|
#define B1_Tcoh_250 0x0 /* 0clk */
|
|
#define B1_Tcah_250 0x3 /* 4clk (or 0x1 1clk) */
|
|
#define B1_Tacp_250 0x0 /* page mode is not used */
|
|
#define B1_PMC_250 0x0 /* page mode disabled */
|
|
|
|
/* BANK1CON 266 */
|
|
#define B1_Tacs_266 0x0 /* 0clk (or 0x1 1clk) */
|
|
#define B1_Tcos_266 0x1 /* 1clk (or 0x2 2clk) */
|
|
#define B1_Tacc_266 0x6 /* 10clk (or 0x7 14clk) */
|
|
#define B1_Tcoh_266 0x0 /* 0clk */
|
|
#define B1_Tcah_266 0x3 /* 4clk (or 0x1 1clk) */
|
|
#define B1_Tacp_266 0x0 /* page mode is not used */
|
|
#define B1_PMC_266 0x0 /* page mode disabled */
|
|
|
|
/* BANK2CON 200 + 250 + 266 */
|
|
#define B2_Tacs 0x3 /* 4clk */
|
|
#define B2_Tcos 0x3 /* 4clk */
|
|
#define B2_Tacc 0x7 /* 14clk */
|
|
#define B2_Tcoh 0x3 /* 4clk */
|
|
#define B2_Tcah 0x3 /* 4clk */
|
|
#define B2_Tacp 0x0 /* page mode is not used */
|
|
#define B2_PMC 0x0 /* page mode disabled */
|
|
|
|
/* BANK3CON 200 + 250 + 266 */
|
|
#define B3_Tacs 0x3 /* 4clk */
|
|
#define B3_Tcos 0x3 /* 4clk */
|
|
#define B3_Tacc 0x7 /* 14clk */
|
|
#define B3_Tcoh 0x3 /* 4clk */
|
|
#define B3_Tcah 0x3 /* 4clk */
|
|
#define B3_Tacp 0x0 /* page mode is not used */
|
|
#define B3_PMC 0x0 /* page mode disabled */
|
|
|
|
/* BANK4CON 200 */
|
|
#define B4_Tacs_200 0x1 /* 1clk */
|
|
#define B4_Tcos_200 0x3 /* 4clk */
|
|
#define B4_Tacc_200 0x7 /* 14clk */
|
|
#define B4_Tcoh_200 0x3 /* 4clk */
|
|
#define B4_Tcah_200 0x2 /* 2clk */
|
|
#define B4_Tacp_200 0x0 /* page mode is not used */
|
|
#define B4_PMC_200 0x0 /* page mode disabled */
|
|
|
|
/* BANK4CON 250 */
|
|
#define B4_Tacs_250 0x1 /* 1clk */
|
|
#define B4_Tcos_250 0x3 /* 4clk */
|
|
#define B4_Tacc_250 0x7 /* 14clk */
|
|
#define B4_Tcoh_250 0x3 /* 4clk */
|
|
#define B4_Tcah_250 0x2 /* 2clk */
|
|
#define B4_Tacp_250 0x0 /* page mode is not used */
|
|
#define B4_PMC_250 0x0 /* page mode disabled */
|
|
|
|
/* BANK4CON 266 */
|
|
#define B4_Tacs_266 0x1 /* 1clk */
|
|
#define B4_Tcos_266 0x3 /* 4clk */
|
|
#define B4_Tacc_266 0x7 /* 14clk */
|
|
#define B4_Tcoh_266 0x3 /* 4clk */
|
|
#define B4_Tcah_266 0x2 /* 2clk */
|
|
#define B4_Tacp_266 0x0 /* page mode is not used */
|
|
#define B4_PMC_266 0x0 /* page mode disabled */
|
|
|
|
/* BANK5CON 200 */
|
|
#define B5_Tacs_200 0x0 /* 0clk */
|
|
#define B5_Tcos_200 0x3 /* 4clk */
|
|
#define B5_Tacc_200 0x4 /* 6clk */
|
|
#define B5_Tcoh_200 0x3 /* 4clk */
|
|
#define B5_Tcah_200 0x1 /* 1clk */
|
|
#define B5_Tacp_200 0x0 /* page mode is not used */
|
|
#define B5_PMC_200 0x0 /* page mode disabled */
|
|
|
|
/* BANK5CON 250 */
|
|
#define B5_Tacs_250 0x0 /* 0clk */
|
|
#define B5_Tcos_250 0x3 /* 4clk */
|
|
#define B5_Tacc_250 0x5 /* 8clk */
|
|
#define B5_Tcoh_250 0x3 /* 4clk */
|
|
#define B5_Tcah_250 0x1 /* 1clk */
|
|
#define B5_Tacp_250 0x0 /* page mode is not used */
|
|
#define B5_PMC_250 0x0 /* page mode disabled */
|
|
|
|
/* BANK5CON 266 */
|
|
#define B5_Tacs_266 0x0 /* 0clk */
|
|
#define B5_Tcos_266 0x3 /* 4clk */
|
|
#define B5_Tacc_266 0x5 /* 8clk */
|
|
#define B5_Tcoh_266 0x3 /* 4clk */
|
|
#define B5_Tcah_266 0x1 /* 1clk */
|
|
#define B5_Tacp_266 0x0 /* page mode is not used */
|
|
#define B5_PMC_266 0x0 /* page mode disabled */
|
|
|
|
#define B6_MT 0x3 /* SDRAM */
|
|
#define B6_Trcd_200 0x0 /* 2clk */
|
|
#define B6_Trcd_250 0x1 /* 3clk */
|
|
#define B6_Trcd_266 0x1 /* 3clk */
|
|
#define B6_SCAN 0x2 /* 10bit */
|
|
|
|
#define B7_MT 0x3 /* SDRAM */
|
|
#define B7_Trcd_200 0x0 /* 2clk */
|
|
#define B7_Trcd_250 0x1 /* 3clk */
|
|
#define B7_Trcd_266 0x1 /* 3clk */
|
|
#define B7_SCAN 0x2 /* 10bit */
|
|
|
|
/* REFRESH parameter */
|
|
#define REFEN 0x1 /* Refresh enable */
|
|
#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
|
|
#define Trp_200 0x0 /* 2clk */
|
|
#define Trp_250 0x1 /* 3clk */
|
|
#define Trp_266 0x1 /* 3clk */
|
|
#define Tsrc_200 0x1 /* 5clk */
|
|
#define Tsrc_250 0x2 /* 6clk */
|
|
#define Tsrc_266 0x3 /* 7clk */
|
|
|
|
/* period=15.6us, HCLK=100Mhz, (2048+1-15.6*100) */
|
|
#define REFCNT_200 489
|
|
/* period=15.6us, HCLK=125Mhz, (2048+1-15.6*125) */
|
|
#define REFCNT_250 99
|
|
/* period=15.6us, HCLK=133Mhz, (2048+1-15.6*133) */
|
|
#define REFCNT_266 0
|
|
/**************************************/
|
|
|
|
.globl lowlevel_init
|
|
lowlevel_init:
|
|
/* use r0 to relocate DATA read/write to flash rather than memory ! */
|
|
ldr r0, =CONFIG_SYS_TEXT_BASE
|
|
ldr r13, =BWSCON
|
|
|
|
/* enable minimal access to PLD */
|
|
ldr r1, [r13] /* load default BWSCON */
|
|
orr r1, r1, #(DW8 + UBLB) << 20 /* set necessary CS attrs */
|
|
str r1, [r13] /* set BWSCON */
|
|
ldr r1, =0x7FF0 /* select slowest timing */
|
|
str r1, [r13, #0x18] /* set BANKCON5 */
|
|
|
|
ldr r1, =PLD_BASE
|
|
ldr r2, =SETUPDATA
|
|
ldrb r1, [r1, #MISC_REG]
|
|
sub r2, r2, r0
|
|
tst r1, #FASTCPU /* FASTCPU available ? */
|
|
addeq r2, r2, #SETUPENTRY_SIZE
|
|
|
|
/* memory control configuration */
|
|
/* r2 = pointer into timing table */
|
|
/* r13 = pointer to MEM controller regs (starting with BWSCON) */
|
|
add r3, r2, #CSDATA_OFFSET
|
|
add r4, r3, #CSDATAENTRY_SIZE
|
|
0:
|
|
ldr r1, [r3], #4
|
|
str r1, [r13], #4
|
|
cmp r3, r4
|
|
bne 0b
|
|
|
|
/* PLD access is now possible */
|
|
/* r3 = SDRAMDATA
|
|
/* r13 = pointer to MEM controller regs */
|
|
ldr r1, =PLD_BASE
|
|
mov r4, #SDRAMENTRY_SIZE
|
|
ldrb r1, [r1, #SDRAM_REG]
|
|
/* calculate start and end point */
|
|
mla r3, r4, r1, r3
|
|
add r4, r3, r4
|
|
0:
|
|
ldr r1, [r3], #4
|
|
str r1, [r13], #4
|
|
cmp r3, r4
|
|
bne 0b
|
|
|
|
/* setup MPLL registers */
|
|
ldr r1, =CLKBASE
|
|
ldr r4, =0xFFFFFF
|
|
add r3, r2, #4 /* r3 points to PLL values */
|
|
str r4, [r1, #LOCKTIME]
|
|
ldmia r3, {r4,r5}
|
|
str r5, [r1, #UPLLCON] /* writing PLL register */
|
|
/* !! order seems to be important !! */
|
|
/* a little delay */
|
|
ldr r3, =0x4000
|
|
0:
|
|
subs r3, r3, #1
|
|
bne 0b
|
|
|
|
str r4, [r1, #MPLLCON] /* writing PLL register */
|
|
/* !! order seems to be important !! */
|
|
/* a little delay */
|
|
ldr r3, =0x4000
|
|
0:
|
|
subs r3, r3, #1
|
|
bne 0b
|
|
|
|
/* everything is fine now */
|
|
mov pc, lr
|
|
|
|
.ltorg
|
|
/* the literal pools origin */
|
|
|
|
#define MK_BWSCON(bws1, bws2, bws3, bws4, bws5, bws6, bws7) \
|
|
((bws1) << 4) + \
|
|
((bws2) << 8) + \
|
|
((bws3) << 12) + \
|
|
((bws4) << 16) + \
|
|
((bws5) << 20) + \
|
|
((bws6) << 24) + \
|
|
((bws7) << 28)
|
|
|
|
#define MK_BANKCON(tacs, tcos, tacc, tcoh, tcah, tacp, pmc) \
|
|
((tacs) << 13) + \
|
|
((tcos) << 11) + \
|
|
((tacc) << 8) + \
|
|
((tcoh) << 6) + \
|
|
((tcah) << 4) + \
|
|
((tacp) << 2) + \
|
|
(pmc)
|
|
|
|
#define MK_BANKCON_SDRAM(trcd, scan) \
|
|
((0x03) << 15) + \
|
|
((trcd) << 2) + \
|
|
(scan)
|
|
|
|
#define MK_SDRAM_REFRESH(enable, trefmd, trp, tsrc, cnt) \
|
|
((enable) << 23) + \
|
|
((trefmd) << 22) + \
|
|
((trp) << 20) + \
|
|
((tsrc) << 18) + \
|
|
(cnt)
|
|
|
|
SETUPDATA:
|
|
.word 0x32410002
|
|
/* PLL values (MDIV, PDIV, SDIV) for 250 MHz */
|
|
.word (0x75 << 12) + (0x01 << 4) + (0x01 << 0)
|
|
/* PLL values for USB clock */
|
|
.word (0x48 << 12) + (0x03 << 4) + (0x02 << 0)
|
|
|
|
/* timing for 250 MHz*/
|
|
0:
|
|
.equiv CSDATA_OFFSET, (. - SETUPDATA)
|
|
.word MK_BWSCON(DW16, \
|
|
DW32, \
|
|
DW32, \
|
|
DW16 + WAIT + UBLB, \
|
|
DW8 + UBLB, \
|
|
DW32, \
|
|
DW32)
|
|
|
|
.word MK_BANKCON(B0_Tacs_250, \
|
|
B0_Tcos_250, \
|
|
B0_Tacc_250, \
|
|
B0_Tcoh_250, \
|
|
B0_Tcah_250, \
|
|
B0_Tacp_250, \
|
|
B0_PMC_250)
|
|
|
|
.word MK_BANKCON(B1_Tacs_250, \
|
|
B1_Tcos_250, \
|
|
B1_Tacc_250, \
|
|
B1_Tcoh_250, \
|
|
B1_Tcah_250, \
|
|
B1_Tacp_250, \
|
|
B1_PMC_250)
|
|
|
|
.word MK_BANKCON(B2_Tacs, \
|
|
B2_Tcos, \
|
|
B2_Tacc, \
|
|
B2_Tcoh, \
|
|
B2_Tcah, \
|
|
B2_Tacp, \
|
|
B2_PMC)
|
|
|
|
.word MK_BANKCON(B3_Tacs, \
|
|
B3_Tcos, \
|
|
B3_Tacc, \
|
|
B3_Tcoh, \
|
|
B3_Tcah, \
|
|
B3_Tacp, \
|
|
B3_PMC)
|
|
|
|
.word MK_BANKCON(B4_Tacs_250, \
|
|
B4_Tcos_250, \
|
|
B4_Tacc_250, \
|
|
B4_Tcoh_250, \
|
|
B4_Tcah_250, \
|
|
B4_Tacp_250, \
|
|
B4_PMC_250)
|
|
|
|
.word MK_BANKCON(B5_Tacs_250, \
|
|
B5_Tcos_250, \
|
|
B5_Tacc_250, \
|
|
B5_Tcoh_250, \
|
|
B5_Tcah_250, \
|
|
B5_Tacp_250, \
|
|
B5_PMC_250)
|
|
|
|
.equiv CSDATAENTRY_SIZE, (. - 0b)
|
|
/* 4Mx8x4 */
|
|
0:
|
|
.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
|
|
.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
|
|
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
|
|
.word 0x32 + BURST_EN
|
|
.word 0x30
|
|
.word 0x30
|
|
.equiv SDRAMENTRY_SIZE, (. - 0b)
|
|
|
|
/* 8Mx8x4 */
|
|
.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
|
|
.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
|
|
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
|
|
.word 0x32 + BURST_EN
|
|
.word 0x30
|
|
.word 0x30
|
|
|
|
/* 2Mx8x4 */
|
|
.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
|
|
.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
|
|
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
|
|
.word 0x32 + BURST_EN
|
|
.word 0x30
|
|
.word 0x30
|
|
|
|
/* 4Mx8x2 */
|
|
.word MK_BANKCON_SDRAM(B6_Trcd_250, B6_SCAN)
|
|
.word MK_BANKCON_SDRAM(B7_Trcd_250, B7_SCAN)
|
|
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_250, Tsrc_250, REFCNT_250)
|
|
.word 0x32 + BURST_EN
|
|
.word 0x30
|
|
.word 0x30
|
|
|
|
.equiv SETUPENTRY_SIZE, (. - SETUPDATA)
|
|
|
|
.word 0x32410000
|
|
/* PLL values (MDIV, PDIV, SDIV) for 200 MHz (Fout = 202.8MHz) */
|
|
.word (0xA1 << 12) + (0x03 << 4) + (0x01 << 0)
|
|
/* PLL values for USB clock */
|
|
.word (0x48 << 12) + (0x03 << 4) + (0x02 << 0)
|
|
|
|
/* timing for 200 MHz and default*/
|
|
.word MK_BWSCON(DW16, \
|
|
DW32, \
|
|
DW32, \
|
|
DW16 + WAIT + UBLB, \
|
|
DW8 + UBLB, \
|
|
DW32, \
|
|
DW32)
|
|
|
|
.word MK_BANKCON(B0_Tacs_200, \
|
|
B0_Tcos_200, \
|
|
B0_Tacc_200, \
|
|
B0_Tcoh_200, \
|
|
B0_Tcah_200, \
|
|
B0_Tacp_200, \
|
|
B0_PMC_200)
|
|
|
|
.word MK_BANKCON(B1_Tacs_200, \
|
|
B1_Tcos_200, \
|
|
B1_Tacc_200, \
|
|
B1_Tcoh_200, \
|
|
B1_Tcah_200, \
|
|
B1_Tacp_200, \
|
|
B1_PMC_200)
|
|
|
|
.word MK_BANKCON(B2_Tacs, \
|
|
B2_Tcos, \
|
|
B2_Tacc, \
|
|
B2_Tcoh, \
|
|
B2_Tcah, \
|
|
B2_Tacp, \
|
|
B2_PMC)
|
|
|
|
.word MK_BANKCON(B3_Tacs, \
|
|
B3_Tcos, \
|
|
B3_Tacc, \
|
|
B3_Tcoh, \
|
|
B3_Tcah, \
|
|
B3_Tacp, \
|
|
B3_PMC)
|
|
|
|
.word MK_BANKCON(B4_Tacs_200, \
|
|
B4_Tcos_200, \
|
|
B4_Tacc_200, \
|
|
B4_Tcoh_200, \
|
|
B4_Tcah_200, \
|
|
B4_Tacp_200, \
|
|
B4_PMC_200)
|
|
|
|
.word MK_BANKCON(B5_Tacs_200, \
|
|
B5_Tcos_200, \
|
|
B5_Tacc_200, \
|
|
B5_Tcoh_200, \
|
|
B5_Tcah_200, \
|
|
B5_Tacp_200, \
|
|
B5_PMC_200)
|
|
|
|
/* 4Mx8x4 */
|
|
.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
|
|
.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
|
|
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
|
|
.word 0x32 + BURST_EN
|
|
.word 0x30
|
|
.word 0x30
|
|
|
|
/* 8Mx8x4 */
|
|
.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
|
|
.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
|
|
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
|
|
.word 0x32 + BURST_EN
|
|
.word 0x30
|
|
.word 0x30
|
|
|
|
/* 2Mx8x4 */
|
|
.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
|
|
.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
|
|
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
|
|
.word 0x32 + BURST_EN
|
|
.word 0x30
|
|
.word 0x30
|
|
|
|
/* 4Mx8x2 */
|
|
.word MK_BANKCON_SDRAM(B6_Trcd_200, B6_SCAN)
|
|
.word MK_BANKCON_SDRAM(B7_Trcd_200, B7_SCAN)
|
|
.word MK_SDRAM_REFRESH(REFEN, TREFMD, Trp_200, Tsrc_200, REFCNT_200)
|
|
.word 0x32 + BURST_EN
|
|
.word 0x30
|
|
.word 0x30
|
|
|
|
.equiv SETUPDATA_SIZE, (. - SETUPDATA)
|