mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 18:59:44 +00:00
fd3a78a538
CS4315 PHY doesn't support phy-reset by software, it needs to reset it by hardware via CPLD control. Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Reviewed-by: York Sun <yorksun@freescale.com>
45 lines
1.5 KiB
C
45 lines
1.5 KiB
C
/*
|
|
* Copyright 2014 Freescale Semiconductor
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* CPLD register set of T2080RDB board-specific.
|
|
*/
|
|
struct cpld_data {
|
|
u8 chip_id1; /* 0x00 - Chip ID1 register */
|
|
u8 chip_id2; /* 0x01 - Chip ID2 register */
|
|
u8 hw_ver; /* 0x02 - Hardware Revision Register */
|
|
u8 sw_ver; /* 0x03 - Software Revision register */
|
|
u8 res0[12]; /* 0x04 - 0x0F - not used */
|
|
u8 reset_ctl; /* 0x10 - Reset control Register */
|
|
u8 flash_csr; /* 0x11 - Flash control and status register */
|
|
u8 thermal_csr; /* 0x12 - Thermal control and status register */
|
|
u8 led_csr; /* 0x13 - LED control and status register */
|
|
u8 sfp_csr; /* 0x14 - SFP+ control and status register */
|
|
u8 misc_csr; /* 0x15 - Misc control and status register */
|
|
u8 boot_or; /* 0x16 - Boot config override register */
|
|
u8 boot_cfg1; /* 0x17 - Boot configuration register 1 */
|
|
u8 boot_cfg2; /* 0x18 - Boot configuration register 2 */
|
|
} cpld_data_t;
|
|
|
|
u8 cpld_read(unsigned int reg);
|
|
void cpld_write(unsigned int reg, u8 value);
|
|
|
|
#define CPLD_READ(reg) cpld_read(offsetof(struct cpld_data, reg))
|
|
#define CPLD_WRITE(reg, value) \
|
|
cpld_write(offsetof(struct cpld_data, reg), value)
|
|
|
|
/* CPLD on IFC */
|
|
#define CPLD_LBMAP_MASK 0x3F
|
|
#define CPLD_BANK_SEL_MASK 0x07
|
|
#define CPLD_BANK_OVERRIDE 0x40
|
|
#define CPLD_LBMAP_ALTBANK 0x44 /* BANK OR | BANK 4 */
|
|
#define CPLD_LBMAP_DFLTBANK 0x40 /* BANK OR | BANK 0 */
|
|
#define CPLD_LBMAP_RESET 0xFF
|
|
#define CPLD_LBMAP_SHIFT 0x03
|
|
#define CPLD_BOOT_SEL 0x80
|
|
|
|
/* RSTCON Register */
|
|
#define CPLD_RSTCON_EDC_RST 0x04
|