mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
77b11f7604
As part of the effort of making U-Boot work with the same device tree as Linux, there is an issue with the "xfi" phy-mode. To be precise, in Linux there was a discussion (for those who have time to read: https://lore.kernel.org/netdev/1576768881-24971-2-git-send-email-madalin.bucur@oss.nxp.com/) which led to a patch: https://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next.git/commit/?id=c114574ebfdf42f826776f717c8056a00fa94881 TL;DR: "xfi" was standardized in Linux as "10gbase-r". This patch changes the relevant occurrences in U-Boot to use "10gbase-r" instead of "xfi" wherever applicable. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ramon Fried <rfried.dev@gmail.com>
70 lines
2.5 KiB
Text
70 lines
2.5 KiB
Text
Overview
|
|
--------
|
|
The LS1046A Development System (QDS) is a high-performance computing,
|
|
evaluation, and development platform that supports the QorIQ LS1046A
|
|
LayerScape Architecture processor. The LS1046AQDS provides SW development
|
|
platform for the Freescale LS1046A processor series, with a complete
|
|
debugging environment.
|
|
|
|
LS1046A SoC Overview
|
|
--------------------
|
|
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1046A
|
|
SoC overview.
|
|
|
|
LS1046AQDS board Overview
|
|
-----------------------
|
|
- SERDES Connections, 8 lanes supporting:
|
|
- PCI Express - 3.0
|
|
- SGMII, SGMII 2.5
|
|
- QSGMII
|
|
- SATA 3.0
|
|
- 10GBase-R
|
|
- DDR Controller
|
|
- 8GB 64bits DDR4 SDRAM. Support rates of up to 2133MT/s
|
|
-IFC/Local Bus
|
|
- One in-socket 128 MB NOR flash 16-bit data bus
|
|
- One 512 MB NAND flash with ECC support
|
|
- PromJet Port
|
|
- FPGA connection
|
|
- USB 3.0
|
|
- Three high speed USB 3.0 ports
|
|
- First USB 3.0 port configured as Host with Type-A connector
|
|
- The other two USB 3.0 ports configured as OTG with micro-AB connector
|
|
- SDHC port connects directly to an adapter card slot, featuring:
|
|
- Optional clock feedback paths, and optional high-speed voltage translation assistance
|
|
- SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC
|
|
- eMMC memory devices
|
|
- DSPI: Onboard support for three SPI flash memory devices
|
|
- 4 I2C controllers
|
|
- One SATA onboard connectors
|
|
- UART
|
|
- Two 4-pin serial ports at up to 115.2 Kbit/s
|
|
- Two DB9 D-Type connectors supporting one Serial port each
|
|
- ARM JTAG support
|
|
|
|
Memory map from core's view
|
|
----------------------------
|
|
Start Address End Address Description Size
|
|
0x00_0000_0000 - 0x00_000F_FFFF Secure Boot ROM 1MB
|
|
0x00_0100_0000 - 0x00_0FFF_FFFF CCSRBAR 240MB
|
|
0x00_1000_0000 - 0x00_1000_FFFF OCRAM0 64KB
|
|
0x00_1001_0000 - 0x00_1001_FFFF OCRAM1 64KB
|
|
0x00_2000_0000 - 0x00_20FF_FFFF DCSR 16MB
|
|
0x00_6000_0000 - 0x00_67FF_FFFF IFC - NOR Flash 128MB
|
|
0x00_7E80_0000 - 0x00_7E80_FFFF IFC - NAND Flash 64KB
|
|
0x00_7FB0_0000 - 0x00_7FB0_0FFF IFC - FPGA 4KB
|
|
0x00_8000_0000 - 0x00_FFFF_FFFF DRAM1 2GB
|
|
0x05_0000_0000 - 0x05_07FF_FFFF QMAN S/W Portal 128M
|
|
0x05_0800_0000 - 0x05_0FFF_FFFF BMAN S/W Portal 128M
|
|
0x08_8000_0000 - 0x09_FFFF_FFFF DRAM2 6GB
|
|
0x40_0000_0000 - 0x47_FFFF_FFFF PCI Express1 32G
|
|
0x48_0000_0000 - 0x4F_FFFF_FFFF PCI Express2 32G
|
|
0x50_0000_0000 - 0x57_FFFF_FFFF PCI Express3 32G
|
|
|
|
Booting Options
|
|
---------------
|
|
a) Promjet Boot
|
|
b) NOR boot
|
|
c) NAND boot
|
|
d) SD boot
|
|
e) QSPI boot
|