mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
298 lines
6.7 KiB
C
298 lines
6.7 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* [origin: Linux kernel linux/arch/arm/mach-at91/clock.c]
|
|
*
|
|
* Copyright (C) 2005 David Brownell
|
|
* Copyright (C) 2005 Ivan Kokshaysky
|
|
* Copyright (C) 2009 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
* Copyright (C) 2013 Bo Shen <voice.shen@atmel.com>
|
|
* Copyright (C) 2015 Wenyou Yang <wenyou.yang@atmel.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/global_data.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/at91_pmc.h>
|
|
#include <asm/arch/clk.h>
|
|
|
|
#if !defined(CONFIG_AT91FAMILY)
|
|
# error You need to define CONFIG_AT91FAMILY in your board config!
|
|
#endif
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static unsigned long at91_css_to_rate(unsigned long css)
|
|
{
|
|
switch (css) {
|
|
case AT91_PMC_MCKR_CSS_SLOW:
|
|
return CONFIG_SYS_AT91_SLOW_CLOCK;
|
|
case AT91_PMC_MCKR_CSS_MAIN:
|
|
return gd->arch.main_clk_rate_hz;
|
|
case AT91_PMC_MCKR_CSS_PLLA:
|
|
return gd->arch.plla_rate_hz;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32 at91_pll_rate(u32 freq, u32 reg)
|
|
{
|
|
unsigned mul, div;
|
|
|
|
div = reg & 0xff;
|
|
mul = (reg >> 18) & 0x7f;
|
|
if (div && mul) {
|
|
freq /= div;
|
|
freq *= mul + 1;
|
|
} else {
|
|
freq = 0;
|
|
}
|
|
|
|
return freq;
|
|
}
|
|
|
|
int at91_clock_init(unsigned long main_clock)
|
|
{
|
|
unsigned freq, mckr;
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
#ifndef CONFIG_SYS_AT91_MAIN_CLOCK
|
|
unsigned tmp;
|
|
/*
|
|
* When the bootloader initialized the main oscillator correctly,
|
|
* there's no problem using the cycle counter. But if it didn't,
|
|
* or when using oscillator bypass mode, we must be told the speed
|
|
* of the main clock.
|
|
*/
|
|
if (!main_clock) {
|
|
do {
|
|
tmp = readl(&pmc->mcfr);
|
|
} while (!(tmp & AT91_PMC_MCFR_MAINRDY));
|
|
tmp &= AT91_PMC_MCFR_MAINF_MASK;
|
|
main_clock = tmp * (CONFIG_SYS_AT91_SLOW_CLOCK / 16);
|
|
}
|
|
#endif
|
|
gd->arch.main_clk_rate_hz = main_clock;
|
|
|
|
/* report if PLLA is more than mildly overclocked */
|
|
gd->arch.plla_rate_hz = at91_pll_rate(main_clock, readl(&pmc->pllar));
|
|
|
|
/*
|
|
* MCK and CPU derive from one of those primary clocks.
|
|
* For now, assume this parentage won't change.
|
|
*/
|
|
mckr = readl(&pmc->mckr);
|
|
|
|
/* plla divisor by 2 */
|
|
if (mckr & (1 << 12))
|
|
gd->arch.plla_rate_hz >>= 1;
|
|
|
|
gd->arch.mck_rate_hz = at91_css_to_rate(mckr & AT91_PMC_MCKR_CSS_MASK);
|
|
freq = gd->arch.mck_rate_hz;
|
|
|
|
/* prescale */
|
|
freq >>= mckr & AT91_PMC_MCKR_PRES_MASK;
|
|
|
|
switch (mckr & AT91_PMC_MCKR_MDIV_MASK) {
|
|
case AT91_PMC_MCKR_MDIV_2:
|
|
gd->arch.mck_rate_hz = freq / 2;
|
|
break;
|
|
case AT91_PMC_MCKR_MDIV_3:
|
|
gd->arch.mck_rate_hz = freq / 3;
|
|
break;
|
|
case AT91_PMC_MCKR_MDIV_4:
|
|
gd->arch.mck_rate_hz = freq / 4;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
gd->arch.cpu_clk_rate_hz = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
void at91_plla_init(u32 pllar)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
|
|
writel(pllar, &pmc->pllar);
|
|
while (!(readl(&pmc->sr) & (AT91_PMC_LOCKA | AT91_PMC_MCKRDY)))
|
|
;
|
|
}
|
|
|
|
void at91_mck_init(u32 mckr)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
u32 tmp;
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= ~(AT91_PMC_MCKR_CSS_MASK |
|
|
AT91_PMC_MCKR_PRES_MASK |
|
|
AT91_PMC_MCKR_MDIV_MASK |
|
|
AT91_PMC_MCKR_PLLADIV_2);
|
|
#ifdef CPU_HAS_H32MXDIV
|
|
tmp &= ~AT91_PMC_MCKR_H32MXDIV;
|
|
#endif
|
|
|
|
tmp |= mckr & (AT91_PMC_MCKR_CSS_MASK |
|
|
AT91_PMC_MCKR_PRES_MASK |
|
|
AT91_PMC_MCKR_MDIV_MASK |
|
|
AT91_PMC_MCKR_PLLADIV_2);
|
|
#ifdef CPU_HAS_H32MXDIV
|
|
tmp |= mckr & AT91_PMC_MCKR_H32MXDIV;
|
|
#endif
|
|
|
|
writel(tmp, &pmc->mckr);
|
|
|
|
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
|
|
;
|
|
}
|
|
|
|
/*
|
|
* For the Master Clock Controller Register(MCKR), while switching
|
|
* to a lower clock source, we must switch the clock source first
|
|
* instead of last. Otherwise, we could end up with too high frequency
|
|
* on the internal bus and peripherals.
|
|
*/
|
|
void at91_mck_init_down(u32 mckr)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
u32 tmp;
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= (~AT91_PMC_MCKR_CSS_MASK);
|
|
tmp |= (mckr & AT91_PMC_MCKR_CSS_MASK);
|
|
writel(tmp, &pmc->mckr);
|
|
|
|
while (!(readl(&pmc->sr) & AT91_PMC_MCKRDY))
|
|
;
|
|
|
|
#ifdef CPU_HAS_H32MXDIV
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= (~AT91_PMC_MCKR_H32MXDIV);
|
|
tmp |= (mckr & AT91_PMC_MCKR_H32MXDIV);
|
|
writel(tmp, &pmc->mckr);
|
|
#endif
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= (~AT91_PMC_MCKR_PLLADIV_MASK);
|
|
tmp |= (mckr & AT91_PMC_MCKR_PLLADIV_MASK);
|
|
writel(tmp, &pmc->mckr);
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= (~AT91_PMC_MCKR_MDIV_MASK);
|
|
tmp |= (mckr & AT91_PMC_MCKR_MDIV_MASK);
|
|
writel(tmp, &pmc->mckr);
|
|
|
|
tmp = readl(&pmc->mckr);
|
|
tmp &= (~AT91_PMC_MCKR_PRES_MASK);
|
|
tmp |= (mckr & AT91_PMC_MCKR_PRES_MASK);
|
|
writel(tmp, &pmc->mckr);
|
|
}
|
|
|
|
int at91_enable_periph_generated_clk(u32 id, u32 clk_source, u32 div)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
u32 regval, status;
|
|
u32 timeout = 1000;
|
|
|
|
if (id > AT91_PMC_PCR_PID_MASK)
|
|
return -EINVAL;
|
|
|
|
if (div > 0xff)
|
|
return -EINVAL;
|
|
|
|
if (clk_source == GCK_CSS_UPLL_CLK) {
|
|
if (at91_upll_clk_enable())
|
|
return -ENODEV;
|
|
}
|
|
|
|
writel(id, &pmc->pcr);
|
|
regval = readl(&pmc->pcr);
|
|
regval &= ~AT91_PMC_PCR_GCKCSS;
|
|
regval &= ~AT91_PMC_PCR_GCKDIV;
|
|
|
|
switch (clk_source) {
|
|
case GCK_CSS_SLOW_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_SLOW_CLK;
|
|
break;
|
|
case GCK_CSS_MAIN_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_MAIN_CLK;
|
|
break;
|
|
case GCK_CSS_PLLA_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_PLLA_CLK;
|
|
break;
|
|
case GCK_CSS_UPLL_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_UPLL_CLK;
|
|
break;
|
|
case GCK_CSS_MCK_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_MCK_CLK;
|
|
break;
|
|
case GCK_CSS_AUDIO_CLK:
|
|
regval |= AT91_PMC_PCR_GCKCSS_AUDIO_CLK;
|
|
break;
|
|
default:
|
|
printf("Error GCK clock source selection!\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
regval |= AT91_PMC_PCR_CMD_WRITE |
|
|
AT91_PMC_PCR_GCKDIV_(div) |
|
|
AT91_PMC_PCR_GCKEN;
|
|
|
|
writel(regval, &pmc->pcr);
|
|
|
|
do {
|
|
udelay(1);
|
|
status = readl(&pmc->sr);
|
|
} while ((!!(--timeout)) && (!(status & AT91_PMC_GCKRDY)));
|
|
|
|
if (!timeout)
|
|
printf("Timeout waiting for GCK ready!\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 at91_get_periph_generated_clk(u32 id)
|
|
{
|
|
struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
|
|
u32 regval, clk_source, div;
|
|
u32 freq;
|
|
|
|
if (id > AT91_PMC_PCR_PID_MASK)
|
|
return 0;
|
|
|
|
writel(id, &pmc->pcr);
|
|
regval = readl(&pmc->pcr);
|
|
|
|
clk_source = regval & AT91_PMC_PCR_GCKCSS;
|
|
switch (clk_source) {
|
|
case AT91_PMC_PCR_GCKCSS_SLOW_CLK:
|
|
freq = CONFIG_SYS_AT91_SLOW_CLOCK;
|
|
break;
|
|
case AT91_PMC_PCR_GCKCSS_MAIN_CLK:
|
|
freq = gd->arch.main_clk_rate_hz;
|
|
break;
|
|
case AT91_PMC_PCR_GCKCSS_PLLA_CLK:
|
|
freq = gd->arch.plla_rate_hz;
|
|
break;
|
|
case AT91_PMC_PCR_GCKCSS_UPLL_CLK:
|
|
freq = AT91_UTMI_PLL_CLK_FREQ;
|
|
break;
|
|
case AT91_PMC_PCR_GCKCSS_MCK_CLK:
|
|
freq = gd->arch.mck_rate_hz;
|
|
break;
|
|
default:
|
|
printf("Improper GCK clock source selection!\n");
|
|
freq = 0;
|
|
break;
|
|
}
|
|
|
|
div = ((regval & AT91_PMC_PCR_GCKDIV) >> AT91_PMC_PCR_GCKDIV_OFFSET);
|
|
div += 1;
|
|
|
|
return freq / div;
|
|
}
|