mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 16:39:35 +00:00
445b45042c
The R5F subsystem/cluster on K3 SoCs can support both LockStep and
Split-modes (superset) or just Split-mode depending on an eFUSE
capability register. The LockStep configuration bit is Read-only
though on Split-mode _only_ devices and as such the System Firmware
does not allow the LockStep mode bit to be configured on such devices.
The current logic in k3_r5f_rproc_configure() fails on Split-mode
devices because of this unconditional programming of the LockStep
mode bit, and results in the probe failure shown during the
"rproc init" step at U-Boot prompt.
Fix this by limiting the LockStep mode bit clear configuration only on
devices supporting both LockStep/Split-modes.
Fixes: 4c850356a8
("remoteproc: Introduce K3 remoteproc driver for R5F subsystem")
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
822 lines
19 KiB
C
822 lines
19 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Texas Instruments' K3 R5 Remoteproc driver
|
|
*
|
|
* Copyright (C) 2018-2019 Texas Instruments Incorporated - http://www.ti.com/
|
|
* Lokesh Vutla <lokeshvutla@ti.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <malloc.h>
|
|
#include <remoteproc.h>
|
|
#include <errno.h>
|
|
#include <clk.h>
|
|
#include <reset.h>
|
|
#include <asm/io.h>
|
|
#include <dm/device_compat.h>
|
|
#include <linux/err.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/soc/ti/ti_sci_protocol.h>
|
|
#include "ti_sci_proc.h"
|
|
|
|
/*
|
|
* R5F's view of this address can either be for ATCM or BTCM with the other
|
|
* at address 0x0 based on loczrama signal.
|
|
*/
|
|
#define K3_R5_TCM_DEV_ADDR 0x41010000
|
|
|
|
/* R5 TI-SCI Processor Configuration Flags */
|
|
#define PROC_BOOT_CFG_FLAG_R5_DBG_EN 0x00000001
|
|
#define PROC_BOOT_CFG_FLAG_R5_DBG_NIDEN 0x00000002
|
|
#define PROC_BOOT_CFG_FLAG_R5_LOCKSTEP 0x00000100
|
|
#define PROC_BOOT_CFG_FLAG_R5_TEINIT 0x00000200
|
|
#define PROC_BOOT_CFG_FLAG_R5_NMFI_EN 0x00000400
|
|
#define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE 0x00000800
|
|
#define PROC_BOOT_CFG_FLAG_R5_BTCM_EN 0x00001000
|
|
#define PROC_BOOT_CFG_FLAG_R5_ATCM_EN 0x00002000
|
|
#define PROC_BOOT_CFG_FLAG_GEN_IGN_BOOTVECTOR 0x10000000
|
|
|
|
/* R5 TI-SCI Processor Control Flags */
|
|
#define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT 0x00000001
|
|
|
|
/* R5 TI-SCI Processor Status Flags */
|
|
#define PROC_BOOT_STATUS_FLAG_R5_WFE 0x00000001
|
|
#define PROC_BOOT_STATUS_FLAG_R5_WFI 0x00000002
|
|
#define PROC_BOOT_STATUS_FLAG_R5_CLK_GATED 0x00000004
|
|
#define PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED 0x00000100
|
|
|
|
#define NR_CORES 2
|
|
|
|
enum cluster_mode {
|
|
CLUSTER_MODE_SPLIT = 0,
|
|
CLUSTER_MODE_LOCKSTEP,
|
|
};
|
|
|
|
/**
|
|
* struct k3_r5_mem - internal memory structure
|
|
* @cpu_addr: MPU virtual address of the memory region
|
|
* @bus_addr: Bus address used to access the memory region
|
|
* @dev_addr: Device address from remoteproc view
|
|
* @size: Size of the memory region
|
|
*/
|
|
struct k3_r5f_mem {
|
|
void __iomem *cpu_addr;
|
|
phys_addr_t bus_addr;
|
|
u32 dev_addr;
|
|
size_t size;
|
|
};
|
|
|
|
/**
|
|
* struct k3_r5f_core - K3 R5 core structure
|
|
* @dev: cached device pointer
|
|
* @cluster: pointer to the parent cluster.
|
|
* @reset: reset control handle
|
|
* @tsp: TI-SCI processor control handle
|
|
* @mem: Array of available internal memories
|
|
* @num_mem: Number of available memories
|
|
* @atcm_enable: flag to control ATCM enablement
|
|
* @btcm_enable: flag to control BTCM enablement
|
|
* @loczrama: flag to dictate which TCM is at device address 0x0
|
|
* @in_use: flag to tell if the core is already in use.
|
|
*/
|
|
struct k3_r5f_core {
|
|
struct udevice *dev;
|
|
struct k3_r5f_cluster *cluster;
|
|
struct reset_ctl reset;
|
|
struct ti_sci_proc tsp;
|
|
struct k3_r5f_mem *mem;
|
|
int num_mems;
|
|
u32 atcm_enable;
|
|
u32 btcm_enable;
|
|
u32 loczrama;
|
|
bool in_use;
|
|
};
|
|
|
|
/**
|
|
* struct k3_r5f_cluster - K3 R5F Cluster structure
|
|
* @mode: Mode to configure the Cluster - Split or LockStep
|
|
* @cores: Array of pointers to R5 cores within the cluster
|
|
*/
|
|
struct k3_r5f_cluster {
|
|
enum cluster_mode mode;
|
|
struct k3_r5f_core *cores[NR_CORES];
|
|
};
|
|
|
|
static bool is_primary_core(struct k3_r5f_core *core)
|
|
{
|
|
return core == core->cluster->cores[0];
|
|
}
|
|
|
|
static int k3_r5f_proc_request(struct k3_r5f_core *core)
|
|
{
|
|
struct k3_r5f_cluster *cluster = core->cluster;
|
|
int i, ret;
|
|
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP) {
|
|
for (i = 0; i < NR_CORES; i++) {
|
|
ret = ti_sci_proc_request(&cluster->cores[i]->tsp);
|
|
if (ret)
|
|
goto proc_release;
|
|
}
|
|
} else {
|
|
ret = ti_sci_proc_request(&core->tsp);
|
|
}
|
|
|
|
return 0;
|
|
|
|
proc_release:
|
|
while (i >= 0) {
|
|
ti_sci_proc_release(&cluster->cores[i]->tsp);
|
|
i--;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void k3_r5f_proc_release(struct k3_r5f_core *core)
|
|
{
|
|
struct k3_r5f_cluster *cluster = core->cluster;
|
|
int i;
|
|
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP)
|
|
for (i = 0; i < NR_CORES; i++)
|
|
ti_sci_proc_release(&cluster->cores[i]->tsp);
|
|
else
|
|
ti_sci_proc_release(&core->tsp);
|
|
}
|
|
|
|
static int k3_r5f_lockstep_release(struct k3_r5f_cluster *cluster)
|
|
{
|
|
int ret, c;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
for (c = NR_CORES - 1; c >= 0; c--) {
|
|
ret = ti_sci_proc_power_domain_on(&cluster->cores[c]->tsp);
|
|
if (ret)
|
|
goto unroll_module_reset;
|
|
}
|
|
|
|
/* deassert local reset on all applicable cores */
|
|
for (c = NR_CORES - 1; c >= 0; c--) {
|
|
ret = reset_deassert(&cluster->cores[c]->reset);
|
|
if (ret)
|
|
goto unroll_local_reset;
|
|
}
|
|
|
|
return 0;
|
|
|
|
unroll_local_reset:
|
|
while (c < NR_CORES) {
|
|
reset_assert(&cluster->cores[c]->reset);
|
|
c++;
|
|
}
|
|
c = 0;
|
|
unroll_module_reset:
|
|
while (c < NR_CORES) {
|
|
ti_sci_proc_power_domain_off(&cluster->cores[c]->tsp);
|
|
c++;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5f_split_release(struct k3_r5f_core *core)
|
|
{
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
ret = ti_sci_proc_power_domain_on(&core->tsp);
|
|
if (ret) {
|
|
dev_err(core->dev, "module-reset deassert failed, ret = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = reset_deassert(&core->reset);
|
|
if (ret) {
|
|
dev_err(core->dev, "local-reset deassert failed, ret = %d\n",
|
|
ret);
|
|
if (ti_sci_proc_power_domain_off(&core->tsp))
|
|
dev_warn(core->dev, "module-reset assert back failed\n");
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5f_prepare(struct udevice *dev)
|
|
{
|
|
struct k3_r5f_core *core = dev_get_priv(dev);
|
|
struct k3_r5f_cluster *cluster = core->cluster;
|
|
int ret = 0;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP)
|
|
ret = k3_r5f_lockstep_release(cluster);
|
|
else
|
|
ret = k3_r5f_split_release(core);
|
|
|
|
if (ret)
|
|
dev_err(dev, "Unable to enable cores for TCM loading %d\n",
|
|
ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5f_core_sanity_check(struct k3_r5f_core *core)
|
|
{
|
|
struct k3_r5f_cluster *cluster = core->cluster;
|
|
|
|
if (core->in_use) {
|
|
dev_err(dev, "Invalid op: Trying to load/start on already running core %d\n",
|
|
core->tsp.proc_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP && !cluster->cores[1]) {
|
|
printf("Secondary core is not probed in this cluster\n");
|
|
return -EAGAIN;
|
|
}
|
|
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP && !is_primary_core(core)) {
|
|
dev_err(dev, "Invalid op: Trying to start secondary core %d in lockstep mode\n",
|
|
core->tsp.proc_id);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (cluster->mode == CLUSTER_MODE_SPLIT && !is_primary_core(core)) {
|
|
if (!core->cluster->cores[0]->in_use) {
|
|
dev_err(dev, "Invalid seq: Enable primary core before loading secondary core\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* k3_r5f_load() - Load up the Remote processor image
|
|
* @dev: rproc device pointer
|
|
* @addr: Address at which image is available
|
|
* @size: size of the image
|
|
*
|
|
* Return: 0 if all goes good, else appropriate error message.
|
|
*/
|
|
static int k3_r5f_load(struct udevice *dev, ulong addr, ulong size)
|
|
{
|
|
struct k3_r5f_core *core = dev_get_priv(dev);
|
|
u32 boot_vector;
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s addr = 0x%lx, size = 0x%lx\n", __func__, addr, size);
|
|
|
|
ret = k3_r5f_core_sanity_check(core);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = k3_r5f_proc_request(core);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = k3_r5f_prepare(dev);
|
|
if (ret) {
|
|
dev_err(dev, "R5f prepare failed for core %d\n",
|
|
core->tsp.proc_id);
|
|
goto proc_release;
|
|
}
|
|
|
|
/* Zero out TCMs so that ECC can be effective on all TCM addresses */
|
|
if (core->atcm_enable)
|
|
memset(core->mem[0].cpu_addr, 0x00, core->mem[0].size);
|
|
if (core->btcm_enable)
|
|
memset(core->mem[1].cpu_addr, 0x00, core->mem[1].size);
|
|
|
|
ret = rproc_elf_load_image(dev, addr, size);
|
|
if (ret < 0) {
|
|
dev_err(dev, "Loading elf failedi %d\n", ret);
|
|
goto proc_release;
|
|
}
|
|
|
|
boot_vector = rproc_elf_get_boot_addr(dev, addr);
|
|
|
|
dev_dbg(dev, "%s: Boot vector = 0x%x\n", __func__, boot_vector);
|
|
|
|
ret = ti_sci_proc_set_config(&core->tsp, boot_vector, 0, 0);
|
|
|
|
proc_release:
|
|
k3_r5f_proc_release(core);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5f_core_halt(struct k3_r5f_core *core)
|
|
{
|
|
int ret;
|
|
|
|
ret = ti_sci_proc_set_control(&core->tsp,
|
|
PROC_BOOT_CTRL_FLAG_R5_CORE_HALT, 0);
|
|
if (ret)
|
|
dev_err(core->dev, "Core %d failed to stop\n",
|
|
core->tsp.proc_id);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5f_core_run(struct k3_r5f_core *core)
|
|
{
|
|
int ret;
|
|
|
|
ret = ti_sci_proc_set_control(&core->tsp,
|
|
0, PROC_BOOT_CTRL_FLAG_R5_CORE_HALT);
|
|
if (ret) {
|
|
dev_err(core->dev, "Core %d failed to start\n",
|
|
core->tsp.proc_id);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* k3_r5f_start() - Start the remote processor
|
|
* @dev: rproc device pointer
|
|
*
|
|
* Return: 0 if all went ok, else return appropriate error
|
|
*/
|
|
static int k3_r5f_start(struct udevice *dev)
|
|
{
|
|
struct k3_r5f_core *core = dev_get_priv(dev);
|
|
struct k3_r5f_cluster *cluster = core->cluster;
|
|
int ret, c;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
ret = k3_r5f_core_sanity_check(core);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = k3_r5f_proc_request(core);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP) {
|
|
if (is_primary_core(core)) {
|
|
for (c = NR_CORES - 1; c >= 0; c--) {
|
|
ret = k3_r5f_core_run(cluster->cores[c]);
|
|
if (ret)
|
|
goto unroll_core_run;
|
|
}
|
|
} else {
|
|
dev_err(dev, "Invalid op: Trying to start secondary core %d in lockstep mode\n",
|
|
core->tsp.proc_id);
|
|
ret = -EINVAL;
|
|
goto proc_release;
|
|
}
|
|
} else {
|
|
ret = k3_r5f_core_run(core);
|
|
if (ret)
|
|
goto proc_release;
|
|
}
|
|
|
|
core->in_use = true;
|
|
|
|
k3_r5f_proc_release(core);
|
|
return 0;
|
|
|
|
unroll_core_run:
|
|
while (c < NR_CORES) {
|
|
k3_r5f_core_halt(cluster->cores[c]);
|
|
c++;
|
|
}
|
|
proc_release:
|
|
k3_r5f_proc_release(core);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5f_split_reset(struct k3_r5f_core *core)
|
|
{
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
if (reset_assert(&core->reset))
|
|
ret = -EINVAL;
|
|
|
|
if (ti_sci_proc_power_domain_off(&core->tsp))
|
|
ret = -EINVAL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5f_lockstep_reset(struct k3_r5f_cluster *cluster)
|
|
{
|
|
int ret = 0, c;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
for (c = 0; c < NR_CORES; c++)
|
|
if (reset_assert(&cluster->cores[c]->reset))
|
|
ret = -EINVAL;
|
|
|
|
/* disable PSC modules on all applicable cores */
|
|
for (c = 0; c < NR_CORES; c++)
|
|
if (ti_sci_proc_power_domain_off(&cluster->cores[c]->tsp))
|
|
ret = -EINVAL;
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int k3_r5f_unprepare(struct udevice *dev)
|
|
{
|
|
struct k3_r5f_core *core = dev_get_priv(dev);
|
|
struct k3_r5f_cluster *cluster = core->cluster;
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP) {
|
|
if (is_primary_core(core))
|
|
ret = k3_r5f_lockstep_reset(cluster);
|
|
} else {
|
|
ret = k3_r5f_split_reset(core);
|
|
}
|
|
|
|
if (ret)
|
|
dev_warn(dev, "Unable to enable cores for TCM loading %d\n",
|
|
ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int k3_r5f_stop(struct udevice *dev)
|
|
{
|
|
struct k3_r5f_core *core = dev_get_priv(dev);
|
|
struct k3_r5f_cluster *cluster = core->cluster;
|
|
int c, ret;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
ret = k3_r5f_proc_request(core);
|
|
if (ret)
|
|
return ret;
|
|
|
|
core->in_use = false;
|
|
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP) {
|
|
if (is_primary_core(core)) {
|
|
for (c = 0; c < NR_CORES; c++)
|
|
k3_r5f_core_halt(cluster->cores[c]);
|
|
} else {
|
|
dev_err(dev, "Invalid op: Trying to stop secondary core in lockstep mode\n");
|
|
ret = -EINVAL;
|
|
goto proc_release;
|
|
}
|
|
} else {
|
|
k3_r5f_core_halt(core);
|
|
}
|
|
|
|
ret = k3_r5f_unprepare(dev);
|
|
proc_release:
|
|
k3_r5f_proc_release(core);
|
|
return ret;
|
|
}
|
|
|
|
static void *k3_r5f_da_to_va(struct udevice *dev, ulong da, ulong size)
|
|
{
|
|
struct k3_r5f_core *core = dev_get_priv(dev);
|
|
void __iomem *va = NULL;
|
|
phys_addr_t bus_addr;
|
|
u32 dev_addr, offset;
|
|
ulong mem_size;
|
|
int i;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
if (size <= 0)
|
|
return NULL;
|
|
|
|
for (i = 0; i < core->num_mems; i++) {
|
|
bus_addr = core->mem[i].bus_addr;
|
|
dev_addr = core->mem[i].dev_addr;
|
|
mem_size = core->mem[i].size;
|
|
|
|
if (da >= bus_addr && (da + size) <= (bus_addr + mem_size)) {
|
|
offset = da - bus_addr;
|
|
va = core->mem[i].cpu_addr + offset;
|
|
return (__force void *)va;
|
|
}
|
|
|
|
if (da >= dev_addr && (da + size) <= (dev_addr + mem_size)) {
|
|
offset = da - dev_addr;
|
|
va = core->mem[i].cpu_addr + offset;
|
|
return (__force void *)va;
|
|
}
|
|
}
|
|
|
|
/* Assume it is DDR region and return da */
|
|
return map_physmem(da, size, MAP_NOCACHE);
|
|
}
|
|
|
|
static int k3_r5f_init(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static int k3_r5f_reset(struct udevice *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_rproc_ops k3_r5f_rproc_ops = {
|
|
.init = k3_r5f_init,
|
|
.reset = k3_r5f_reset,
|
|
.start = k3_r5f_start,
|
|
.stop = k3_r5f_stop,
|
|
.load = k3_r5f_load,
|
|
.device_to_virt = k3_r5f_da_to_va,
|
|
};
|
|
|
|
static int k3_r5f_rproc_configure(struct k3_r5f_core *core)
|
|
{
|
|
struct k3_r5f_cluster *cluster = core->cluster;
|
|
u32 set_cfg = 0, clr_cfg = 0, cfg, ctrl, sts;
|
|
bool lockstep_permitted;
|
|
u64 boot_vec = 0;
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
ret = ti_sci_proc_request(&core->tsp);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* Do not touch boot vector now. Load will take care of it. */
|
|
clr_cfg |= PROC_BOOT_CFG_FLAG_GEN_IGN_BOOTVECTOR;
|
|
|
|
ret = ti_sci_proc_get_status(&core->tsp, &boot_vec, &cfg, &ctrl, &sts);
|
|
if (ret)
|
|
goto out;
|
|
|
|
/* Sanity check for Lockstep mode */
|
|
lockstep_permitted = !!(sts &
|
|
PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED);
|
|
if (cluster->mode && is_primary_core(core) && !lockstep_permitted) {
|
|
dev_err(core->dev, "LockStep mode not permitted on this device\n");
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
/* Primary core only configuration */
|
|
if (is_primary_core(core)) {
|
|
/* always enable ARM mode */
|
|
clr_cfg |= PROC_BOOT_CFG_FLAG_R5_TEINIT;
|
|
if (cluster->mode == CLUSTER_MODE_LOCKSTEP)
|
|
set_cfg |= PROC_BOOT_CFG_FLAG_R5_LOCKSTEP;
|
|
else if (lockstep_permitted)
|
|
clr_cfg |= PROC_BOOT_CFG_FLAG_R5_LOCKSTEP;
|
|
}
|
|
|
|
if (core->atcm_enable)
|
|
set_cfg |= PROC_BOOT_CFG_FLAG_R5_ATCM_EN;
|
|
else
|
|
clr_cfg |= PROC_BOOT_CFG_FLAG_R5_ATCM_EN;
|
|
|
|
if (core->btcm_enable)
|
|
set_cfg |= PROC_BOOT_CFG_FLAG_R5_BTCM_EN;
|
|
else
|
|
clr_cfg |= PROC_BOOT_CFG_FLAG_R5_BTCM_EN;
|
|
|
|
if (core->loczrama)
|
|
set_cfg |= PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE;
|
|
else
|
|
clr_cfg |= PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE;
|
|
|
|
ret = k3_r5f_core_halt(core);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = ti_sci_proc_set_config(&core->tsp, boot_vec, set_cfg, clr_cfg);
|
|
out:
|
|
ti_sci_proc_release(&core->tsp);
|
|
return ret;
|
|
}
|
|
|
|
static int ti_sci_proc_of_to_priv(struct udevice *dev, struct ti_sci_proc *tsp)
|
|
{
|
|
u32 ids[2];
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
tsp->sci = ti_sci_get_by_phandle(dev, "ti,sci");
|
|
if (IS_ERR(tsp->sci)) {
|
|
dev_err(dev, "ti_sci get failed: %ld\n", PTR_ERR(tsp->sci));
|
|
return PTR_ERR(tsp->sci);
|
|
}
|
|
|
|
ret = dev_read_u32_array(dev, "ti,sci-proc-ids", ids, 2);
|
|
if (ret) {
|
|
dev_err(dev, "Proc IDs not populated %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
tsp->ops = &tsp->sci->ops.proc_ops;
|
|
tsp->proc_id = ids[0];
|
|
tsp->host_id = ids[1];
|
|
tsp->dev_id = dev_read_u32_default(dev, "ti,sci-dev-id",
|
|
TI_SCI_RESOURCE_NULL);
|
|
if (tsp->dev_id == TI_SCI_RESOURCE_NULL) {
|
|
dev_err(dev, "Device ID not populated %d\n", ret);
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int k3_r5f_of_to_priv(struct k3_r5f_core *core)
|
|
{
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
core->atcm_enable = dev_read_u32_default(core->dev, "atcm-enable", 0);
|
|
core->btcm_enable = dev_read_u32_default(core->dev, "btcm-enable", 1);
|
|
core->loczrama = dev_read_u32_default(core->dev, "loczrama", 1);
|
|
|
|
ret = ti_sci_proc_of_to_priv(core->dev, &core->tsp);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = reset_get_by_index(core->dev, 0, &core->reset);
|
|
if (ret) {
|
|
dev_err(core->dev, "Reset lines not available: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int k3_r5f_core_of_get_memories(struct k3_r5f_core *core)
|
|
{
|
|
static const char * const mem_names[] = {"atcm", "btcm"};
|
|
struct udevice *dev = core->dev;
|
|
int i;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
core->num_mems = ARRAY_SIZE(mem_names);
|
|
core->mem = calloc(core->num_mems, sizeof(*core->mem));
|
|
if (!core->mem)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < core->num_mems; i++) {
|
|
core->mem[i].bus_addr = dev_read_addr_size_name(dev,
|
|
mem_names[i],
|
|
(fdt_addr_t *)&core->mem[i].size);
|
|
if (core->mem[i].bus_addr == FDT_ADDR_T_NONE) {
|
|
dev_err(dev, "%s bus address not found\n",
|
|
mem_names[i]);
|
|
return -EINVAL;
|
|
}
|
|
core->mem[i].cpu_addr = map_physmem(core->mem[i].bus_addr,
|
|
core->mem[i].size,
|
|
MAP_NOCACHE);
|
|
if (!strcmp(mem_names[i], "atcm")) {
|
|
core->mem[i].dev_addr = core->loczrama ?
|
|
0 : K3_R5_TCM_DEV_ADDR;
|
|
} else {
|
|
core->mem[i].dev_addr = core->loczrama ?
|
|
K3_R5_TCM_DEV_ADDR : 0;
|
|
}
|
|
|
|
dev_dbg(dev, "memory %8s: bus addr %pa size 0x%zx va %p da 0x%x\n",
|
|
mem_names[i], &core->mem[i].bus_addr,
|
|
core->mem[i].size, core->mem[i].cpu_addr,
|
|
core->mem[i].dev_addr);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* k3_r5f_probe() - Basic probe
|
|
* @dev: corresponding k3 remote processor device
|
|
*
|
|
* Return: 0 if all goes good, else appropriate error message.
|
|
*/
|
|
static int k3_r5f_probe(struct udevice *dev)
|
|
{
|
|
struct k3_r5f_cluster *cluster = dev_get_priv(dev->parent);
|
|
struct k3_r5f_core *core = dev_get_priv(dev);
|
|
bool r_state;
|
|
int ret;
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
core->dev = dev;
|
|
ret = k3_r5f_of_to_priv(core);
|
|
if (ret)
|
|
return ret;
|
|
|
|
core->cluster = cluster;
|
|
/* Assume Primary core gets probed first */
|
|
if (!cluster->cores[0])
|
|
cluster->cores[0] = core;
|
|
else
|
|
cluster->cores[1] = core;
|
|
|
|
ret = k3_r5f_core_of_get_memories(core);
|
|
if (ret) {
|
|
dev_err(dev, "Rproc getting internal memories failed\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = core->tsp.sci->ops.dev_ops.is_on(core->tsp.sci, core->tsp.dev_id,
|
|
&r_state, &core->in_use);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (core->in_use) {
|
|
dev_info(dev, "Core %d is already in use. No rproc commands work\n",
|
|
core->tsp.proc_id);
|
|
return 0;
|
|
}
|
|
|
|
/* Make sure Local reset is asserted. Redundant? */
|
|
reset_assert(&core->reset);
|
|
|
|
ret = k3_r5f_rproc_configure(core);
|
|
if (ret) {
|
|
dev_err(dev, "rproc configure failed %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
dev_dbg(dev, "Remoteproc successfully probed\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int k3_r5f_remove(struct udevice *dev)
|
|
{
|
|
struct k3_r5f_core *core = dev_get_priv(dev);
|
|
|
|
free(core->mem);
|
|
|
|
ti_sci_proc_release(&core->tsp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id k3_r5f_rproc_ids[] = {
|
|
{ .compatible = "ti,am654-r5f"},
|
|
{ .compatible = "ti,j721e-r5f"},
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(k3_r5f_rproc) = {
|
|
.name = "k3_r5f_rproc",
|
|
.of_match = k3_r5f_rproc_ids,
|
|
.id = UCLASS_REMOTEPROC,
|
|
.ops = &k3_r5f_rproc_ops,
|
|
.probe = k3_r5f_probe,
|
|
.remove = k3_r5f_remove,
|
|
.priv_auto_alloc_size = sizeof(struct k3_r5f_core),
|
|
};
|
|
|
|
static int k3_r5f_cluster_probe(struct udevice *dev)
|
|
{
|
|
struct k3_r5f_cluster *cluster = dev_get_priv(dev);
|
|
|
|
dev_dbg(dev, "%s\n", __func__);
|
|
|
|
cluster->mode = dev_read_u32_default(dev, "lockstep-mode",
|
|
CLUSTER_MODE_LOCKSTEP);
|
|
|
|
if (device_get_child_count(dev) != 2) {
|
|
dev_err(dev, "Invalid number of R5 cores");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev_dbg(dev, "%s: Cluster successfully probed in %s mode\n",
|
|
__func__, cluster->mode ? "lockstep" : "split");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct udevice_id k3_r5fss_ids[] = {
|
|
{ .compatible = "ti,am654-r5fss"},
|
|
{ .compatible = "ti,j721e-r5fss"},
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(k3_r5fss) = {
|
|
.name = "k3_r5fss",
|
|
.of_match = k3_r5fss_ids,
|
|
.id = UCLASS_MISC,
|
|
.probe = k3_r5f_cluster_probe,
|
|
.priv_auto_alloc_size = sizeof(struct k3_r5f_cluster),
|
|
.flags = DM_FLAG_DEFAULT_PD_CTRL_OFF,
|
|
};
|