mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 09:48:16 +00:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
129 lines
3.1 KiB
C
129 lines
3.1 KiB
C
/*
|
|
* Freescale iMX51 ATA driver
|
|
*
|
|
* Copyright (C) 2010 Marek Vasut <marek.vasut@gmail.com>
|
|
*
|
|
* Based on code by:
|
|
* Mahesh Mahadevan <mahesh.mahadevan@freescale.com>
|
|
*
|
|
* Based on code from original FSL ATA driver, which is
|
|
* part of eCos, the Embedded Configurable Operating System.
|
|
* Copyright (C) 1998, 1999, 2000, 2001, 2002 Red Hat, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <config.h>
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <ide.h>
|
|
|
|
#include <asm/arch/imx-regs.h>
|
|
#include <asm/arch/clock.h>
|
|
|
|
/* MXC ATA register offsets */
|
|
struct mxc_ata_config_regs {
|
|
u8 time_off; /* 0x00 */
|
|
u8 time_on;
|
|
u8 time_1;
|
|
u8 time_2w;
|
|
u8 time_2r;
|
|
u8 time_ax;
|
|
u8 time_pio_rdx;
|
|
u8 time_4;
|
|
u8 time_9;
|
|
u8 time_m;
|
|
u8 time_jn;
|
|
u8 time_d;
|
|
u8 time_k;
|
|
u8 time_ack;
|
|
u8 time_env;
|
|
u8 time_udma_rdx;
|
|
u8 time_zah; /* 0x10 */
|
|
u8 time_mlix;
|
|
u8 time_dvh;
|
|
u8 time_dzfs;
|
|
u8 time_dvs;
|
|
u8 time_cvh;
|
|
u8 time_ss;
|
|
u8 time_cyc;
|
|
u32 fifo_data_32; /* 0x18 */
|
|
u32 fifo_data_16;
|
|
u32 fifo_fill;
|
|
u32 ata_control;
|
|
u32 interrupt_pending;
|
|
u32 interrupt_enable;
|
|
u32 interrupt_clear;
|
|
u32 fifo_alarm;
|
|
};
|
|
|
|
struct mxc_data_hdd_regs {
|
|
u32 drive_data; /* 0xa0 */
|
|
u32 drive_features;
|
|
u32 drive_sector_count;
|
|
u32 drive_sector_num;
|
|
u32 drive_cyl_low;
|
|
u32 drive_cyl_high;
|
|
u32 drive_dev_head;
|
|
u32 command;
|
|
u32 status;
|
|
u32 alt_status;
|
|
};
|
|
|
|
/* PIO timing table */
|
|
#define NR_PIO_SPECS 5
|
|
static uint16_t pio_t1[NR_PIO_SPECS] = { 70, 50, 30, 30, 25 };
|
|
static uint16_t pio_t2_8[NR_PIO_SPECS] = { 290, 290, 290, 80, 70 };
|
|
static uint16_t pio_t4[NR_PIO_SPECS] = { 30, 20, 15, 10, 10 };
|
|
static uint16_t pio_t9[NR_PIO_SPECS] = { 20, 15, 10, 10, 10 };
|
|
static uint16_t pio_tA[NR_PIO_SPECS] = { 50, 50, 50, 50, 50 };
|
|
|
|
#define REG2OFF(reg) ((((uint32_t)reg) & 0x3) * 8)
|
|
static void set_ata_bus_timing(unsigned char mode)
|
|
{
|
|
uint32_t T = 1000000000 / mxc_get_clock(MXC_IPG_CLK);
|
|
|
|
struct mxc_ata_config_regs *ata_regs;
|
|
ata_regs = (struct mxc_ata_config_regs *)CONFIG_SYS_ATA_BASE_ADDR;
|
|
|
|
if (mode >= NR_PIO_SPECS)
|
|
return;
|
|
|
|
/* Write TIME_OFF/ON/1/2W */
|
|
writeb(3, &ata_regs->time_off);
|
|
writeb(3, &ata_regs->time_on);
|
|
writeb((pio_t1[mode] + T) / T, &ata_regs->time_1);
|
|
writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2w);
|
|
|
|
/* Write TIME_2R/AX/RDX/4 */
|
|
writeb((pio_t2_8[mode] + T) / T, &ata_regs->time_2r);
|
|
writeb((pio_tA[mode] + T) / T + 2, &ata_regs->time_ax);
|
|
writeb(1, &ata_regs->time_pio_rdx);
|
|
writeb((pio_t4[mode] + T) / T, &ata_regs->time_4);
|
|
|
|
/* Write TIME_9 ; the rest of timing registers is irrelevant for PIO */
|
|
writeb((pio_t9[mode] + T) / T, &ata_regs->time_9);
|
|
}
|
|
|
|
int ide_preinit(void)
|
|
{
|
|
struct mxc_ata_config_regs *ata_regs;
|
|
ata_regs = (struct mxc_ata_config_regs *)CONFIG_SYS_ATA_BASE_ADDR;
|
|
|
|
/* 46.3.3.4 @ FSL iMX51 manual */
|
|
/* FIFO normal op., drive reset */
|
|
writel(0x80, &ata_regs->ata_control);
|
|
/* FIFO normal op., drive not reset */
|
|
writel(0xc0, &ata_regs->ata_control);
|
|
|
|
/* Configure the PIO timing */
|
|
set_ata_bus_timing(CONFIG_MXC_ATA_PIO_MODE);
|
|
|
|
/* 46.3.3.4 @ FSL iMX51 manual */
|
|
/* Drive not reset, IORDY handshake */
|
|
writel(0x41, &ata_regs->ata_control);
|
|
|
|
return 0;
|
|
}
|