Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-24 21:54:01 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/rtc/ds1337.c
Tom Rini 65cc0e2a65 global: Move remaining CONFIG_SYS_* to CFG_SYS_* 
The rest of the unmigrated CONFIG symbols in the CONFIG_SYS namespace do
not easily transition to Kconfig. In many cases they likely should come
from the device tree instead. Move these out of CONFIG namespace and in
to CFG namespace.

Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2022-12-05 16:06:08 -05:00

319 lines
8.6 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2001-2008
* Copyright 2020 NXP
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
* Keith Outwater, keith_outwater@mvis.com`
*/
/*
* Date & Time support (no alarms) for Dallas Semiconductor (now Maxim)
* DS1337 Real Time Clock (RTC).
*/
#include <common.h>
#include <command.h>
#include <dm.h>
#include <log.h>
#include <rtc.h>
#include <i2c.h>
/*
* RTC register addresses
*/
#if defined CONFIG_RTC_DS1337
#define RTC_SEC_REG_ADDR 0x0
#define RTC_MIN_REG_ADDR 0x1
#define RTC_HR_REG_ADDR 0x2
#define RTC_DAY_REG_ADDR 0x3
#define RTC_DATE_REG_ADDR 0x4
#define RTC_MON_REG_ADDR 0x5
#define RTC_YR_REG_ADDR 0x6
#define RTC_CTL_REG_ADDR 0x0e
#define RTC_STAT_REG_ADDR 0x0f
#define RTC_TC_REG_ADDR 0x10
#elif defined CONFIG_RTC_DS1388
#define RTC_SEC_REG_ADDR 0x1
#define RTC_MIN_REG_ADDR 0x2
#define RTC_HR_REG_ADDR 0x3
#define RTC_DAY_REG_ADDR 0x4
#define RTC_DATE_REG_ADDR 0x5
#define RTC_MON_REG_ADDR 0x6
#define RTC_YR_REG_ADDR 0x7
#define RTC_CTL_REG_ADDR 0x0c
#define RTC_STAT_REG_ADDR 0x0b
#define RTC_TC_REG_ADDR 0x0a
#endif
/*
* RTC control register bits
*/
#define RTC_CTL_BIT_A1IE 0x1 /* Alarm 1 interrupt enable */
#define RTC_CTL_BIT_A2IE 0x2 /* Alarm 2 interrupt enable */
#define RTC_CTL_BIT_INTCN 0x4 /* Interrupt control */
#define RTC_CTL_BIT_RS1 0x8 /* Rate select 1 */
#define RTC_CTL_BIT_RS2 0x10 /* Rate select 2 */
#define RTC_CTL_BIT_DOSC 0x80 /* Disable Oscillator */
/*
* RTC status register bits
*/
#define RTC_STAT_BIT_A1F 0x1 /* Alarm 1 flag */
#define RTC_STAT_BIT_A2F 0x2 /* Alarm 2 flag */
#define RTC_STAT_BIT_OSF 0x80 /* Oscillator stop flag */
#if !CONFIG_IS_ENABLED(DM_RTC)
static uchar rtc_read (uchar reg);
static void rtc_write (uchar reg, uchar val);
/*
* Get the current time from the RTC
*/
int rtc_get (struct rtc_time *tmp)
{
int rel = 0;
uchar sec, min, hour, mday, wday, mon_cent, year, control, status;
control = rtc_read (RTC_CTL_REG_ADDR);
status = rtc_read (RTC_STAT_REG_ADDR);
sec = rtc_read (RTC_SEC_REG_ADDR);
min = rtc_read (RTC_MIN_REG_ADDR);
hour = rtc_read (RTC_HR_REG_ADDR);
wday = rtc_read (RTC_DAY_REG_ADDR);
mday = rtc_read (RTC_DATE_REG_ADDR);
mon_cent = rtc_read (RTC_MON_REG_ADDR);
year = rtc_read (RTC_YR_REG_ADDR);
/* No century bit, assume year 2000 */
#ifdef CONFIG_RTC_DS1388
mon_cent |= 0x80;
#endif
debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x "
"hr: %02x min: %02x sec: %02x control: %02x status: %02x\n",
year, mon_cent, mday, wday, hour, min, sec, control, status);
if (status & RTC_STAT_BIT_OSF) {
printf ("### Warning: RTC oscillator has stopped\n");
/* clear the OSF flag */
rtc_write (RTC_STAT_REG_ADDR,
rtc_read (RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF);
rel = -1;
}
tmp->tm_sec = bcd2bin (sec & 0x7F);
tmp->tm_min = bcd2bin (min & 0x7F);
tmp->tm_hour = bcd2bin (hour & 0x3F);
tmp->tm_mday = bcd2bin (mday & 0x3F);
tmp->tm_mon = bcd2bin (mon_cent & 0x1F);
tmp->tm_year = bcd2bin (year) + ((mon_cent & 0x80) ? 2000 : 1900);
tmp->tm_wday = bcd2bin ((wday - 1) & 0x07);
tmp->tm_yday = 0;
tmp->tm_isdst= 0;
debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
return rel;
}
/*
* Set the RTC
*/
int rtc_set (struct rtc_time *tmp)
{
uchar century;
debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
rtc_write (RTC_YR_REG_ADDR, bin2bcd (tmp->tm_year % 100));
century = (tmp->tm_year >= 2000) ? 0x80 : 0;
rtc_write (RTC_MON_REG_ADDR, bin2bcd (tmp->tm_mon) | century);
rtc_write (RTC_DAY_REG_ADDR, bin2bcd (tmp->tm_wday + 1));
rtc_write (RTC_DATE_REG_ADDR, bin2bcd (tmp->tm_mday));
rtc_write (RTC_HR_REG_ADDR, bin2bcd (tmp->tm_hour));
rtc_write (RTC_MIN_REG_ADDR, bin2bcd (tmp->tm_min));
rtc_write (RTC_SEC_REG_ADDR, bin2bcd (tmp->tm_sec));
return 0;
}
/*
* Reset the RTC. We also enable the oscillator output on the
* SQW/INTB* pin and program it for 32,768 Hz output. Note that
* according to the datasheet, turning on the square wave output
* increases the current drain on the backup battery from about
* 600 nA to 2uA. Define CONFIG_RTC_DS1337_NOOSC if you wish to turn
* off the OSC output.
*/
#ifdef CONFIG_RTC_DS1337_NOOSC
#define RTC_DS1337_RESET_VAL \
(RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
#else
#define RTC_DS1337_RESET_VAL (RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
#endif
void rtc_reset (void)
{
#ifdef CONFIG_RTC_DS1337
rtc_write (RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL);
#elif defined CONFIG_RTC_DS1388
rtc_write(RTC_CTL_REG_ADDR, 0x0); /* hw default */
#endif
#ifdef CONFIG_RTC_DS1339_TCR_VAL
rtc_write (RTC_TC_REG_ADDR, CONFIG_RTC_DS1339_TCR_VAL);
#endif
#ifdef CONFIG_RTC_DS1388_TCR_VAL
rtc_write(RTC_TC_REG_ADDR, CONFIG_RTC_DS1388_TCR_VAL);
#endif
}
/*
* Helper functions
*/
static
uchar rtc_read (uchar reg)
{
return (i2c_reg_read (CFG_SYS_I2C_RTC_ADDR, reg));
}
static void rtc_write (uchar reg, uchar val)
{
i2c_reg_write (CFG_SYS_I2C_RTC_ADDR, reg, val);
}
#else
static uchar rtc_read(struct udevice *dev, uchar reg)
{
return dm_i2c_reg_read(dev, reg);
}
static void rtc_write(struct udevice *dev, uchar reg, uchar val)
{
dm_i2c_reg_write(dev, reg, val);
}
static int ds1337_rtc_get(struct udevice *dev, struct rtc_time *tmp)
{
int rel = 0;
uchar sec, min, hour, mday, wday, mon_cent, year, control, status;
control = rtc_read(dev, RTC_CTL_REG_ADDR);
status = rtc_read(dev, RTC_STAT_REG_ADDR);
sec = rtc_read(dev, RTC_SEC_REG_ADDR);
min = rtc_read(dev, RTC_MIN_REG_ADDR);
hour = rtc_read(dev, RTC_HR_REG_ADDR);
wday = rtc_read(dev, RTC_DAY_REG_ADDR);
mday = rtc_read(dev, RTC_DATE_REG_ADDR);
mon_cent = rtc_read(dev, RTC_MON_REG_ADDR);
year = rtc_read(dev, RTC_YR_REG_ADDR);
/* No century bit, assume year 2000 */
#ifdef CONFIG_RTC_DS1388
mon_cent |= 0x80;
#endif
debug("Get RTC year: %02x mon/cent: %02x mday: %02x wday: %02x\n",
year, mon_cent, mday, wday);
debug("hr: %02x min: %02x sec: %02x control: %02x status: %02x\n",
hour, min, sec, control, status);
if (status & RTC_STAT_BIT_OSF) {
printf("### Warning: RTC oscillator has stopped\n");
/* clear the OSF flag */
rtc_write(dev, RTC_STAT_REG_ADDR,
rtc_read(dev, RTC_STAT_REG_ADDR) & ~RTC_STAT_BIT_OSF);
rel = -1;
}
tmp->tm_sec = bcd2bin(sec & 0x7F);
tmp->tm_min = bcd2bin(min & 0x7F);
tmp->tm_hour = bcd2bin(hour & 0x3F);
tmp->tm_mday = bcd2bin(mday & 0x3F);
tmp->tm_mon = bcd2bin(mon_cent & 0x1F);
tmp->tm_year = bcd2bin(year) + ((mon_cent & 0x80) ? 2000 : 1900);
tmp->tm_wday = bcd2bin((wday - 1) & 0x07);
tmp->tm_yday = 0;
tmp->tm_isdst = 0;
debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
return rel;
}
static int ds1337_rtc_set(struct udevice *dev, const struct rtc_time *tmp)
{
uchar century;
debug("Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n",
tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
rtc_write(dev, RTC_YR_REG_ADDR, bin2bcd(tmp->tm_year % 100));
century = (tmp->tm_year >= 2000) ? 0x80 : 0;
rtc_write(dev, RTC_MON_REG_ADDR, bin2bcd(tmp->tm_mon) | century);
rtc_write(dev, RTC_DAY_REG_ADDR, bin2bcd(tmp->tm_wday + 1));
rtc_write(dev, RTC_DATE_REG_ADDR, bin2bcd(tmp->tm_mday));
rtc_write(dev, RTC_HR_REG_ADDR, bin2bcd(tmp->tm_hour));
rtc_write(dev, RTC_MIN_REG_ADDR, bin2bcd(tmp->tm_min));
rtc_write(dev, RTC_SEC_REG_ADDR, bin2bcd(tmp->tm_sec));
return 0;
}
#ifdef CONFIG_RTC_DS1337_NOOSC
#define RTC_DS1337_RESET_VAL \
(RTC_CTL_BIT_INTCN | RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
#else
#define RTC_DS1337_RESET_VAL (RTC_CTL_BIT_RS1 | RTC_CTL_BIT_RS2)
#endif
static int ds1337_rtc_reset(struct udevice *dev)
{
#ifdef CONFIG_RTC_DS1337
rtc_write(dev, RTC_CTL_REG_ADDR, RTC_DS1337_RESET_VAL);
#elif defined CONFIG_RTC_DS1388
rtc_write(dev, RTC_CTL_REG_ADDR, 0x0); /* hw default */
#endif
#ifdef CONFIG_RTC_DS1339_TCR_VAL
rtc_write(dev, RTC_TC_REG_ADDR, CONFIG_RTC_DS1339_TCR_VAL);
#endif
#ifdef CONFIG_RTC_DS1388_TCR_VAL
rtc_write(dev, RTC_TC_REG_ADDR, CONFIG_RTC_DS1388_TCR_VAL);
#endif
return 0;
}
static const struct rtc_ops ds1337_rtc_ops = {
.get = ds1337_rtc_get,
.set = ds1337_rtc_set,
.reset = ds1337_rtc_reset,
};
static const struct udevice_id ds1337_rtc_ids[] = {
{ .compatible = "ds1337" },
{ .compatible = "ds1338" },
{ .compatible = "ds1339" },
{ }
};
U_BOOT_DRIVER(rtc_ds1337) = {
.name = "rtc-ds1337",
.id = UCLASS_RTC,
.of_match = ds1337_rtc_ids,
.ops = &ds1337_rtc_ops,
};
#endif
Reference in a new issue View git blame Copy permalink