mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-12 14:23:00 +00:00
87d1cac49d
Add initial support for sama5d29_curiosity board. Hardware: SoC: SAMA5D29 500 MHz DRAM: LPDDR2 512 MiB PMIC: MCP16502 Debug: UART0 Flash: QSPI NOR 8 MiB RGB LCD connector Mikrobus connectors x 2 SD-Card connectors x 2 USB 2.0 x 2 Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
219 lines
4.8 KiB
Text
219 lines
4.8 KiB
Text
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* at91-sama5d29_curiosity.dts - Device Tree file for SAMA5D29 CURIOSITY board
|
|
*
|
|
* Copyright (C) 2023 Microchip Technology Inc. and its subsidiaries
|
|
*
|
|
* Author: Mihai Sain <mihai.sain@microchip.com>
|
|
*
|
|
*/
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/at91.h>
|
|
#include "sama5d2.dtsi"
|
|
#include "sama5d2-pinfunc.h"
|
|
|
|
/ {
|
|
model = "Microchip SAMA5D29-Curiosity";
|
|
compatible = "atmel,sama5d29-curiosity", "atmel,sama5d2", "atmel,sama5";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootwait";
|
|
stdout-path = &uart0;
|
|
};
|
|
|
|
memory {
|
|
reg = <0x20000000 0x20000000>; // 512 MiB LPDDR2-333
|
|
};
|
|
|
|
clocks {
|
|
slow_xtal: slow_xtal {
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
main_xtal: main_xtal {
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
onewire_tm: onewire {
|
|
gpios = <&pioA PIN_PC9 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_onewire_tm_default>;
|
|
status = "okay";
|
|
|
|
w1_eeprom: w1_eeprom@0 {
|
|
compatible = "maxim,ds24b33";
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
ahb {
|
|
usb1: ohci@400000 {
|
|
num-ports = <3>;
|
|
atmel,vbus-gpio = <&pioA PIN_PB13 GPIO_ACTIVE_HIGH>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb_default>;
|
|
status = "okay";
|
|
};
|
|
|
|
usb2: ehci@500000 {
|
|
status = "okay";
|
|
};
|
|
|
|
sdmmc0: sdio-host@a0000000 {
|
|
bus-width = <4>;
|
|
disable-wp;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sdmmc0_default>;
|
|
status = "okay";
|
|
};
|
|
|
|
sdmmc1: sdio-host@b0000000 {
|
|
bus-width = <4>;
|
|
disable-wp;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_sdmmc1_default>;
|
|
status = "okay";
|
|
};
|
|
|
|
apb {
|
|
hlcdc: hlcdc@f0000000 {
|
|
atmel,vl-bpix = <4>;
|
|
atmel,output-mode = <24>;
|
|
atmel,guard-time = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_pwm &pinctrl_lcd_rgb666>;
|
|
status = "okay";
|
|
|
|
display-timings { // PDA TM5000
|
|
800x480 {
|
|
clock-frequency = <33000000>;
|
|
xres = <800>;
|
|
yres = <480>;
|
|
hactive = <800>;
|
|
vactive = <480>;
|
|
hsync-len = <64>;
|
|
hfront-porch = <1>;
|
|
hback-porch = <64>;
|
|
vfront-porch = <1>;
|
|
vback-porch = <22>;
|
|
vsync-len = <23>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qspi1: spi@f0024000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_qspi1_default>;
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "jedec,spi-nor";
|
|
reg = <0>;
|
|
spi-max-frequency = <80000000>;
|
|
spi-rx-bus-width = <4>;
|
|
spi-tx-bus-width = <4>;
|
|
m25p,fast-read;
|
|
};
|
|
};
|
|
|
|
uart0: serial@f801c000 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart0_default>;
|
|
status = "okay";
|
|
};
|
|
|
|
pioA: pinctrl@fc038000 {
|
|
pinctrl_lcd_base: lcd_base {
|
|
pinmux = <PIN_PC30__LCDVSYNC>,
|
|
<PIN_PC31__LCDHSYNC>,
|
|
<PIN_PD1__LCDDEN>,
|
|
<PIN_PD0__LCDPCK>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_lcd_pwm: lcd_pwm {
|
|
pinmux = <PIN_PC28__LCDPWM>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_lcd_rgb666: lcd_rgb666 {
|
|
pinmux = <PIN_PC10__LCDDAT2>,
|
|
<PIN_PC11__LCDDAT3>,
|
|
<PIN_PC12__LCDDAT4>,
|
|
<PIN_PC13__LCDDAT5>,
|
|
<PIN_PC14__LCDDAT6>,
|
|
<PIN_PC15__LCDDAT7>,
|
|
<PIN_PC16__LCDDAT10>,
|
|
<PIN_PC17__LCDDAT11>,
|
|
<PIN_PC18__LCDDAT12>,
|
|
<PIN_PC19__LCDDAT13>,
|
|
<PIN_PC20__LCDDAT14>,
|
|
<PIN_PC21__LCDDAT15>,
|
|
<PIN_PC22__LCDDAT18>,
|
|
<PIN_PC23__LCDDAT19>,
|
|
<PIN_PC24__LCDDAT20>,
|
|
<PIN_PC25__LCDDAT21>,
|
|
<PIN_PC26__LCDDAT22>,
|
|
<PIN_PC27__LCDDAT23>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_qspi1_default: qspi1_default {
|
|
pinmux = <PIN_PB5__QSPI1_SCK>,
|
|
<PIN_PB6__QSPI1_CS>,
|
|
<PIN_PB7__QSPI1_IO0>,
|
|
<PIN_PB8__QSPI1_IO1>,
|
|
<PIN_PB9__QSPI1_IO2>,
|
|
<PIN_PB10__QSPI1_IO3>;
|
|
bias-pull-up;
|
|
};
|
|
|
|
pinctrl_sdmmc0_default: sdmmc0_default {
|
|
pinmux = <PIN_PA0__SDMMC0_CK>,
|
|
<PIN_PA1__SDMMC0_CMD>,
|
|
<PIN_PA2__SDMMC0_DAT0>,
|
|
<PIN_PA3__SDMMC0_DAT1>,
|
|
<PIN_PA4__SDMMC0_DAT2>,
|
|
<PIN_PA5__SDMMC0_DAT3>,
|
|
<PIN_PA11__SDMMC0_VDDSEL>,
|
|
<PIN_PA13__SDMMC0_CD>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_sdmmc1_default: sdmmc1_default {
|
|
pinmux = <PIN_PA18__SDMMC1_DAT0>,
|
|
<PIN_PA19__SDMMC1_DAT1>,
|
|
<PIN_PA20__SDMMC1_DAT2>,
|
|
<PIN_PA21__SDMMC1_DAT3>,
|
|
<PIN_PA22__SDMMC1_CK>,
|
|
<PIN_PA28__SDMMC1_CMD>,
|
|
<PIN_PA30__SDMMC1_CD>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_uart0_default: uart0_default {
|
|
pinmux = <PIN_PB26__URXD0>,
|
|
<PIN_PB27__UTXD0>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_usb_default: usb_default {
|
|
pinmux = <PIN_PA6__GPIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_usba_vbus: usba_vbus {
|
|
pinmux = <PIN_PB13__GPIO>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_onewire_tm_default: onewire_tm_default {
|
|
pinmux = <PIN_PC9__GPIO>;
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|