mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 18:10:13 +00:00
82f5942e51
In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are enabled, the console stdin, stdout, stderr must be defined in environment. Define the default settings to fix the following warning on boot: " In: No input devices available! Out: No output devices available! Err: No error devices available! " Sort the default environment as well. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
60 lines
2 KiB
C
60 lines
2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause */
|
|
/*
|
|
* Copyright (C) 2020 Marek Vasut <marex@denx.de>
|
|
*
|
|
* Configuration settings for the DH STM32MP15x SoMs
|
|
*/
|
|
|
|
#ifndef __CONFIG_STM32MP15_DH_DHSOM_H__
|
|
#define __CONFIG_STM32MP15_DH_DHSOM_H__
|
|
|
|
/* PHY needs a longer autoneg timeout */
|
|
#define PHY_ANEG_TIMEOUT 20000
|
|
|
|
#ifdef CONFIG_SPL_BUILD
|
|
#define CFG_EXTRA_ENV_SETTINGS \
|
|
"dfu_alt_info_ram=u-boot.itb ram " \
|
|
__stringify(CONFIG_SPL_LOAD_FIT_ADDRESS) \
|
|
" 0x800000\0"
|
|
#endif
|
|
|
|
#define STM32MP_BOARD_EXTRA_ENV \
|
|
"dh_update_sd_to_emmc=" /* Install U-Boot from SD to eMMC */ \
|
|
"setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \
|
|
"load mmc 0:4 ${loadaddr1} boot/u-boot-spl.stm32 && " \
|
|
"setexpr sblkcnt ${filesize} + 0x1ff && " \
|
|
"setexpr sblkcnt ${sblkcnt} / 0x200 && " \
|
|
"load mmc 0:4 ${loadaddr} boot/u-boot.itb && " \
|
|
"setexpr ublkcnt ${filesize} + 0x1ff && " \
|
|
"setexpr ublkcnt ${ublkcnt} / 0x200 && " \
|
|
"mmc partconf 1 1 1 1 && mmc dev 1 1 && " \
|
|
"mmc write ${loadaddr1} 0 ${sblkcnt} && " \
|
|
"mmc dev 1 2 && " \
|
|
"mmc write ${loadaddr1} 0 ${sblkcnt} && " \
|
|
"mmc dev 1 && " \
|
|
"gpt write mmc 1 'name=ssbl,size=2MiB' && " \
|
|
"mmc write ${loadaddr} 0x22 ${ublkcnt} && " \
|
|
"mmc partconf 1 1 1 0 && " \
|
|
"setenv loadaddr1 && " \
|
|
"setenv sblkcnt && " \
|
|
"setenv ublkcnt\0" \
|
|
"dh_update_sd_to_sf=" /* Erase SPI NOR and install U-Boot from SD */ \
|
|
"setexpr loadaddr1 ${loadaddr} + 0x1000000 && " \
|
|
"load mmc 0:4 ${loadaddr1} /boot/u-boot-spl.stm32 && " \
|
|
"env set filesize1 ${filesize} && " \
|
|
"load mmc 0:4 ${loadaddr} /boot/u-boot.itb && " \
|
|
"sf probe && sf erase 0 0x200000 && " \
|
|
"sf update ${loadaddr1} 0 ${filesize1} && " \
|
|
"sf update ${loadaddr1} 0x40000 ${filesize1} && " \
|
|
"sf update ${loadaddr} 0x80000 ${filesize} && " \
|
|
"env set filesize1 && env set loadaddr1\0" \
|
|
"stdin=serial\0" \
|
|
"stdout=serial\0" \
|
|
"stderr=serial\0" \
|
|
"update_sf=run dh_update_sd_to_sf\0" \
|
|
"usb_pgood_delay=1000\0"
|
|
|
|
|
|
#include <configs/stm32mp15_common.h>
|
|
|
|
#endif
|