u-boot/cmd/sata.c
Peng Ma 2d7818d04f cmd: sata: Add block unbind device function
If we didn't unbind the sata from block device, the same devices would
be added after sata remove,
This patch is to resolve this issue as below:

=> sata info
SATA#0:
	(3.0 Gbps)
SATA#1:
	(3.0 Gbps)
Device 0: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY30
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 1: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX30
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
=> sata stop
=> sata info
SATA#0:
	(3.0 Gbps)
SATA#1:
	(3.0 Gbps)
Device 0: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 1: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 2: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005PY300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)
Device 3: Model: INTEL SSDSA2BW300G3D Firm: 4PC10362 Ser#: BTPR247005VX300
            Type: Hard Disk
            Supports 48-bit addressing
            Capacity: 286168.1 MB = 279.4 GB (586072368 x 512)

Signed-off-by: Peng Ma <peng.ma@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2020-01-27 19:54:20 -05:00

125 lines
2.7 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2000-2005, DENX Software Engineering
* Wolfgang Denk <wd@denx.de>
* Copyright (C) Procsys. All rights reserved.
* Mushtaq Khan <mushtaq_k@procsys.com>
* <mushtaqk_921@yahoo.co.in>
* Copyright (C) 2008 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*/
#include <common.h>
#include <ahci.h>
#include <dm.h>
#include <command.h>
#include <part.h>
#include <sata.h>
#include <dm/device-internal.h>
#include <dm/uclass-internal.h>
static int sata_curr_device = -1;
int sata_remove(int devnum)
{
#ifdef CONFIG_AHCI
struct udevice *dev;
int rc;
blk_unbind_all(IF_TYPE_SATA);
rc = uclass_find_device(UCLASS_AHCI, devnum, &dev);
if (!rc && !dev)
rc = uclass_find_first_device(UCLASS_AHCI, &dev);
if (rc || !dev) {
printf("Cannot find SATA device %d (err=%d)\n", devnum, rc);
return CMD_RET_FAILURE;
}
rc = device_remove(dev, DM_REMOVE_NORMAL);
if (rc) {
printf("Cannot remove SATA device '%s' (err=%d)\n", dev->name,
rc);
return CMD_RET_FAILURE;
}
return 0;
#else
return sata_stop();
#endif
}
int sata_probe(int devnum)
{
#ifdef CONFIG_AHCI
struct udevice *dev;
int rc;
rc = uclass_get_device(UCLASS_AHCI, devnum, &dev);
if (rc)
rc = uclass_find_first_device(UCLASS_AHCI, &dev);
if (rc) {
printf("Cannot probe SATA device %d (err=%d)\n", devnum, rc);
return CMD_RET_FAILURE;
}
if (!dev) {
printf("No SATA device found!\n");
return CMD_RET_FAILURE;
}
rc = sata_scan(dev);
if (rc) {
printf("Cannot scan SATA device %d (err=%d)\n", devnum, rc);
return CMD_RET_FAILURE;
}
return 0;
#else
return sata_initialize() < 0 ? CMD_RET_FAILURE : CMD_RET_SUCCESS;
#endif
}
static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
int rc = 0;
if (argc >= 2) {
int devnum = 0;
if (argc == 3)
devnum = (int)simple_strtoul(argv[2], NULL, 10);
if (!strcmp(argv[1], "stop"))
return sata_remove(devnum);
if (!strcmp(argv[1], "init")) {
if (sata_curr_device != -1) {
rc = sata_remove(devnum);
if (rc)
return rc;
}
return sata_probe(devnum);
}
}
/* If the user has not yet run `sata init`, do it now */
if (sata_curr_device == -1) {
rc = sata_probe(0);
if (rc)
return rc;
sata_curr_device = 0;
}
return blk_common_cmd(argc, argv, IF_TYPE_SATA, &sata_curr_device);
}
U_BOOT_CMD(
sata, 5, 1, do_sata,
"SATA sub system",
"init - init SATA sub system\n"
"sata stop [dev] - disable SATA sub system or device\n"
"sata info - show available SATA devices\n"
"sata device [dev] - show or set current device\n"
"sata part [dev] - print partition table\n"
"sata read addr blk# cnt\n"
"sata write addr blk# cnt"
);