mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
85b8c5c4bf
Conflicts: arch/arm/cpu/arm926ejs/mxs/Makefile board/compulab/cm_t35/Makefile board/corscience/tricorder/Makefile board/ppcag/bg0900/Makefile drivers/bootcount/Makefile include/configs/omap4_common.h include/configs/pdnb3.h Makefile conflicts are due to additions/removals of object files on the ARM branch vs KBuild introduction on the main branch. Resolution consists in adjusting the list of object files in the main branch version. This also applies to two files which are not listed as conflicting but had to be modified: board/compulab/common/Makefile board/udoo/Makefile include/configs/omap4_common.h conflicts are due to the OMAP4 conversion to ti_armv7_common.h on the ARM side, and CONFIG_SYS_HZ removal on the main side. Resolution is to convert as this icludes removal of CONFIG_SYS_HZ. include/configs/pdnb3.h is due to a removal on ARM side. Trivial resolution is to remove the file. Note: 'git show' will also list two files just because they are new: include/configs/am335x_igep0033.h include/configs/omap3_igep00x0.h
235 lines
6.3 KiB
C
235 lines
6.3 KiB
C
/*
|
|
* (C) Copyright 2013 Atmel Corporation.
|
|
* Josh Wu <josh.wu@atmel.com>
|
|
*
|
|
* Configuation settings for the AT91SAM9N12-EK boards.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __AT91SAM9N12_CONFIG_H_
|
|
#define __AT91SAM9N12_CONFIG_H_
|
|
|
|
/*
|
|
* SoC must be defined first, before hardware.h is included.
|
|
* In this case SoC is defined in boards.cfg.
|
|
*/
|
|
#include <asm/hardware.h>
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0x26f00000
|
|
|
|
#define CONFIG_ARM926EJS
|
|
#define CONFIG_AT91FAMILY
|
|
|
|
/* ARM asynchronous clock */
|
|
#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
|
|
#define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */
|
|
|
|
/* Misc CPU related */
|
|
#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS
|
|
#define CONFIG_INITRD_TAG
|
|
#define CONFIG_SKIP_LOWLEVEL_INIT
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
#define CONFIG_DISPLAY_CPUINFO
|
|
|
|
#define CONFIG_OF_LIBFDT
|
|
|
|
/* general purpose I/O */
|
|
#define CONFIG_AT91_GPIO
|
|
|
|
/* serial console */
|
|
#define CONFIG_ATMEL_USART
|
|
#define CONFIG_USART_BASE ATMEL_BASE_DBGU
|
|
#define CONFIG_USART_ID ATMEL_ID_SYS
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
/* LCD */
|
|
#define CONFIG_LCD
|
|
#define LCD_BPP LCD_COLOR16
|
|
#define LCD_OUTPUT_BPP 24
|
|
#define CONFIG_LCD_LOGO
|
|
#define CONFIG_LCD_INFO
|
|
#define CONFIG_LCD_INFO_BELOW_LOGO
|
|
#define CONFIG_SYS_WHITE_ON_BLACK
|
|
#define CONFIG_ATMEL_HLCD
|
|
#define CONFIG_ATMEL_LCD_RGB565
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
|
|
#define CONFIG_BOOTDELAY 3
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/* NOR flash - no real flash on this board */
|
|
#define CONFIG_SYS_NO_FLASH
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
#undef CONFIG_CMD_FPGA
|
|
|
|
#define CONFIG_CMD_BOOTZ
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_NAND
|
|
#define CONFIG_CMD_SF
|
|
#define CONFIG_CMD_MMC
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_USB
|
|
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define CONFIG_SYS_SDRAM_BASE 0x20000000
|
|
#define CONFIG_SYS_SDRAM_SIZE 0x08000000
|
|
|
|
/*
|
|
* Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM,
|
|
* leaving the correct space for initial global data structure above
|
|
* that address while providing maximum stack area below.
|
|
*/
|
|
# define CONFIG_SYS_INIT_SP_ADDR \
|
|
(ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE)
|
|
|
|
/* DataFlash */
|
|
#ifdef CONFIG_CMD_SF
|
|
#define CONFIG_ATMEL_SPI
|
|
#define CONFIG_SPI_FLASH
|
|
#define CONFIG_SPI_FLASH_ATMEL
|
|
#define CONFIG_SF_DEFAULT_SPEED 30000000
|
|
#define CONFIG_ENV_SPI_MODE SPI_MODE_3
|
|
#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
|
|
#endif
|
|
|
|
/* NAND flash */
|
|
#ifdef CONFIG_CMD_NAND
|
|
#define CONFIG_NAND_ATMEL
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
|
|
#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
|
|
#define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 4
|
|
#define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 5
|
|
|
|
/* PMECC & PMERRLOC */
|
|
#define CONFIG_ATMEL_NAND_HWECC
|
|
#define CONFIG_ATMEL_NAND_HW_PMECC
|
|
#define CONFIG_PMECC_CAP 2
|
|
#define CONFIG_PMECC_SECTOR_SIZE 512
|
|
#define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000
|
|
|
|
#define CONFIG_CMD_NAND_TRIMFFS
|
|
|
|
#endif
|
|
|
|
#define CONFIG_MTD_PARTITIONS
|
|
#define CONFIG_MTD_DEVICE
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define MTDIDS_DEFAULT "nand0=atmel_nand"
|
|
#define MTDPARTS_DEFAULT \
|
|
"mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \
|
|
"256k(env),256k(env_redundant),256k(spare)," \
|
|
"512k(dtb),6M(kernel)ro,-(rootfs)"
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"console=console=ttyS0,115200\0" \
|
|
"mtdparts="MTDPARTS_DEFAULT"\0" \
|
|
"bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\
|
|
"bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0"
|
|
|
|
/* MMC */
|
|
#ifdef CONFIG_CMD_MMC
|
|
#define CONFIG_MMC
|
|
#define CONFIG_GENERIC_MMC
|
|
#define CONFIG_GENERIC_ATMEL_MCI
|
|
#endif
|
|
|
|
/* FAT */
|
|
#ifdef CONFIG_CMD_FAT
|
|
#define CONFIG_DOS_PARTITION
|
|
#endif
|
|
|
|
/* Ethernet */
|
|
#define CONFIG_KS8851_MLL
|
|
#define CONFIG_KS8851_MLL_BASEADDR 0x30000000 /* use NCS2 */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
|
|
#define CONFIG_SYS_MEMTEST_END 0x26e00000
|
|
|
|
/* USB host */
|
|
#ifdef CONFIG_CMD_USB
|
|
#define CONFIG_USB_ATMEL
|
|
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9n12"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
|
|
#define CONFIG_USB_STORAGE
|
|
#endif
|
|
|
|
#ifdef CONFIG_SYS_USE_SPIFLASH
|
|
|
|
/* bootstrap + u-boot + env + linux in dataflash on CS0 */
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_ENV_OFFSET 0x5000
|
|
#define CONFIG_ENV_SIZE 0x3000
|
|
#define CONFIG_ENV_SECT_SIZE 0x1000
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \
|
|
"sf probe 0; sf read 0x22000000 0x100000 0x300000; " \
|
|
"bootm 0x22000000"
|
|
|
|
#elif defined(CONFIG_SYS_USE_NANDFLASH)
|
|
|
|
/* bootstrap + u-boot + env + linux in nandflash */
|
|
#define CONFIG_ENV_IS_IN_NAND
|
|
#define CONFIG_ENV_OFFSET 0xc0000
|
|
#define CONFIG_ENV_OFFSET_REDUND 0x100000
|
|
#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \
|
|
"nand read 0x21000000 0x180000 0x080000;" \
|
|
"nand read 0x22000000 0x200000 0x400000;" \
|
|
"bootm 0x22000000 - 0x21000000"
|
|
|
|
#else /* CONFIG_SYS_USE_MMC */
|
|
|
|
/* bootstrap + u-boot + env + linux in mmc */
|
|
#define CONFIG_ENV_IS_IN_MMC
|
|
/* For FAT system, most cases it should be in the reserved sector */
|
|
#define CONFIG_ENV_OFFSET 0x2000
|
|
#define CONFIG_ENV_SIZE 0x1000
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \
|
|
"fatload mmc 0:1 0x21000000 dtb;" \
|
|
"fatload mmc 0:1 0x22000000 uImage;" \
|
|
"bootm 0x22000000 - 0x21000000"
|
|
|
|
#endif
|
|
|
|
#define CONFIG_SYS_PROMPT "U-Boot> "
|
|
#define CONFIG_SYS_CBSIZE 256
|
|
#define CONFIG_SYS_MAXARGS 16
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \
|
|
+ 16)
|
|
#define CONFIG_SYS_LONGHELP
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#define CONFIG_AUTO_COMPLETE
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
|
#define CONFIG_STACKSIZE (32 * 1024) /* regular stack */
|
|
|
|
#endif
|