mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 03:23:47 +00:00
ea2ca7e17e
Rename these options so that CONFIG_IS_ENABLED can be used with them. Signed-off-by: Simon Glass <sjg@chromium.org>
367 lines
8.6 KiB
C
367 lines
8.6 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* SPL specific code for Compulab CM-FX6 board
|
|
*
|
|
* Copyright (C) 2014, Compulab Ltd - http://compulab.co.il/
|
|
*
|
|
* Author: Nikita Kiryanov <nikita@compulab.co.il>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clock_legacy.h>
|
|
#include <hang.h>
|
|
#include <init.h>
|
|
#include <spl.h>
|
|
#include <asm/io.h>
|
|
#include <asm/gpio.h>
|
|
#include <asm/arch/mx6-ddr.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/arch/crm_regs.h>
|
|
#include <asm/mach-imx/iomux-v3.h>
|
|
#include <fsl_esdhc_imx.h>
|
|
#include <linux/delay.h>
|
|
#include "common.h"
|
|
|
|
enum ddr_config {
|
|
DDR_16BIT_256MB,
|
|
DDR_32BIT_512MB,
|
|
DDR_32BIT_1GB,
|
|
DDR_64BIT_1GB,
|
|
DDR_64BIT_2GB,
|
|
DDR_64BIT_4GB,
|
|
DDR_UNKNOWN,
|
|
};
|
|
|
|
/*
|
|
* Below DRAM_RESET[DDR_SEL] = 0 which is incorrect according to
|
|
* Freescale QRM, but this is exactly the value used by the automatic
|
|
* calibration script and it works also in all our tests, so we leave
|
|
* it as is at this point.
|
|
*/
|
|
#define CM_FX6_DDR_IOMUX_CFG \
|
|
.dram_sdqs0 = 0x00000038, \
|
|
.dram_sdqs1 = 0x00000038, \
|
|
.dram_sdqs2 = 0x00000038, \
|
|
.dram_sdqs3 = 0x00000038, \
|
|
.dram_sdqs4 = 0x00000038, \
|
|
.dram_sdqs5 = 0x00000038, \
|
|
.dram_sdqs6 = 0x00000038, \
|
|
.dram_sdqs7 = 0x00000038, \
|
|
.dram_dqm0 = 0x00000038, \
|
|
.dram_dqm1 = 0x00000038, \
|
|
.dram_dqm2 = 0x00000038, \
|
|
.dram_dqm3 = 0x00000038, \
|
|
.dram_dqm4 = 0x00000038, \
|
|
.dram_dqm5 = 0x00000038, \
|
|
.dram_dqm6 = 0x00000038, \
|
|
.dram_dqm7 = 0x00000038, \
|
|
.dram_cas = 0x00000038, \
|
|
.dram_ras = 0x00000038, \
|
|
.dram_sdclk_0 = 0x00000038, \
|
|
.dram_sdclk_1 = 0x00000038, \
|
|
.dram_sdcke0 = 0x00003000, \
|
|
.dram_sdcke1 = 0x00003000, \
|
|
.dram_reset = 0x00000038, \
|
|
.dram_sdba2 = 0x00000000, \
|
|
.dram_sdodt0 = 0x00000038, \
|
|
.dram_sdodt1 = 0x00000038,
|
|
|
|
#define CM_FX6_GPR_IOMUX_CFG \
|
|
.grp_b0ds = 0x00000038, \
|
|
.grp_b1ds = 0x00000038, \
|
|
.grp_b2ds = 0x00000038, \
|
|
.grp_b3ds = 0x00000038, \
|
|
.grp_b4ds = 0x00000038, \
|
|
.grp_b5ds = 0x00000038, \
|
|
.grp_b6ds = 0x00000038, \
|
|
.grp_b7ds = 0x00000038, \
|
|
.grp_addds = 0x00000038, \
|
|
.grp_ddrmode_ctl = 0x00020000, \
|
|
.grp_ddrpke = 0x00000000, \
|
|
.grp_ddrmode = 0x00020000, \
|
|
.grp_ctlds = 0x00000038, \
|
|
.grp_ddr_type = 0x000C0000,
|
|
|
|
static struct mx6sdl_iomux_ddr_regs ddr_iomux_s = { CM_FX6_DDR_IOMUX_CFG };
|
|
static struct mx6sdl_iomux_grp_regs grp_iomux_s = { CM_FX6_GPR_IOMUX_CFG };
|
|
static struct mx6dq_iomux_ddr_regs ddr_iomux_q = { CM_FX6_DDR_IOMUX_CFG };
|
|
static struct mx6dq_iomux_grp_regs grp_iomux_q = { CM_FX6_GPR_IOMUX_CFG };
|
|
|
|
static struct mx6_mmdc_calibration cm_fx6_calib_s = {
|
|
.p0_mpwldectrl0 = 0x005B0061,
|
|
.p0_mpwldectrl1 = 0x004F0055,
|
|
.p0_mpdgctrl0 = 0x0314030C,
|
|
.p0_mpdgctrl1 = 0x025C0268,
|
|
.p0_mprddlctl = 0x42464646,
|
|
.p0_mpwrdlctl = 0x36322C34,
|
|
};
|
|
|
|
static struct mx6_ddr_sysinfo cm_fx6_sysinfo_s = {
|
|
.cs1_mirror = 1,
|
|
.cs_density = 16,
|
|
.bi_on = 1,
|
|
.rtt_nom = 1,
|
|
.rtt_wr = 0,
|
|
.ralat = 5,
|
|
.walat = 1,
|
|
.mif3_mode = 3,
|
|
.rst_to_cke = 0x23,
|
|
.sde_to_rst = 0x10,
|
|
};
|
|
|
|
static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_s = {
|
|
.mem_speed = 800,
|
|
.density = 4,
|
|
.rowaddr = 14,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1800,
|
|
.trcmin = 5200,
|
|
.trasmin = 3600,
|
|
.SRT = 0,
|
|
};
|
|
|
|
static void spl_mx6s_dram_init(enum ddr_config dram_config, bool reset)
|
|
{
|
|
if (reset)
|
|
((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2;
|
|
|
|
switch (dram_config) {
|
|
case DDR_16BIT_256MB:
|
|
cm_fx6_sysinfo_s.dsize = 0;
|
|
cm_fx6_sysinfo_s.ncs = 1;
|
|
break;
|
|
case DDR_32BIT_512MB:
|
|
cm_fx6_sysinfo_s.dsize = 1;
|
|
cm_fx6_sysinfo_s.ncs = 1;
|
|
break;
|
|
case DDR_32BIT_1GB:
|
|
cm_fx6_sysinfo_s.dsize = 1;
|
|
cm_fx6_sysinfo_s.ncs = 2;
|
|
break;
|
|
default:
|
|
puts("Tried to setup invalid DDR configuration\n");
|
|
hang();
|
|
}
|
|
|
|
mx6_dram_cfg(&cm_fx6_sysinfo_s, &cm_fx6_calib_s, &cm_fx6_ddr3_cfg_s);
|
|
udelay(100);
|
|
}
|
|
|
|
static struct mx6_mmdc_calibration cm_fx6_calib_q = {
|
|
.p0_mpwldectrl0 = 0x00630068,
|
|
.p0_mpwldectrl1 = 0x0068005D,
|
|
.p0_mpdgctrl0 = 0x04140428,
|
|
.p0_mpdgctrl1 = 0x037C037C,
|
|
.p0_mprddlctl = 0x3C30303A,
|
|
.p0_mpwrdlctl = 0x3A344038,
|
|
.p1_mpwldectrl0 = 0x0035004C,
|
|
.p1_mpwldectrl1 = 0x00170026,
|
|
.p1_mpdgctrl0 = 0x0374037C,
|
|
.p1_mpdgctrl1 = 0x0350032C,
|
|
.p1_mprddlctl = 0x30322A3C,
|
|
.p1_mpwrdlctl = 0x48304A3E,
|
|
};
|
|
|
|
static struct mx6_ddr_sysinfo cm_fx6_sysinfo_q = {
|
|
.cs_density = 16,
|
|
.cs1_mirror = 1,
|
|
.bi_on = 1,
|
|
.rtt_nom = 1,
|
|
.rtt_wr = 0,
|
|
.ralat = 5,
|
|
.walat = 1,
|
|
.mif3_mode = 3,
|
|
.rst_to_cke = 0x23,
|
|
.sde_to_rst = 0x10,
|
|
.refsel = 1, /* Refresh cycles at 32KHz */
|
|
.refr = 7, /* 8 refresh commands per refresh cycle */
|
|
};
|
|
|
|
static struct mx6_ddr3_cfg cm_fx6_ddr3_cfg_q = {
|
|
.mem_speed = 1066,
|
|
.density = 4,
|
|
.rowaddr = 14,
|
|
.coladdr = 10,
|
|
.pagesz = 2,
|
|
.trcd = 1324,
|
|
.trcmin = 59500,
|
|
.trasmin = 9750,
|
|
.SRT = 0,
|
|
};
|
|
|
|
static void spl_mx6q_dram_init(enum ddr_config dram_config, bool reset)
|
|
{
|
|
if (reset)
|
|
((struct mmdc_p_regs *)MX6_MMDC_P0_MDCTL)->mdmisc = 2;
|
|
|
|
cm_fx6_ddr3_cfg_q.rowaddr = 14;
|
|
switch (dram_config) {
|
|
case DDR_16BIT_256MB:
|
|
cm_fx6_sysinfo_q.dsize = 0;
|
|
cm_fx6_sysinfo_q.ncs = 1;
|
|
break;
|
|
case DDR_32BIT_512MB:
|
|
cm_fx6_sysinfo_q.dsize = 1;
|
|
cm_fx6_sysinfo_q.ncs = 1;
|
|
break;
|
|
case DDR_64BIT_1GB:
|
|
cm_fx6_sysinfo_q.dsize = 2;
|
|
cm_fx6_sysinfo_q.ncs = 1;
|
|
break;
|
|
case DDR_64BIT_2GB:
|
|
cm_fx6_sysinfo_q.dsize = 2;
|
|
cm_fx6_sysinfo_q.ncs = 2;
|
|
break;
|
|
case DDR_64BIT_4GB:
|
|
cm_fx6_sysinfo_q.dsize = 2;
|
|
cm_fx6_sysinfo_q.ncs = 2;
|
|
cm_fx6_ddr3_cfg_q.rowaddr = 15;
|
|
break;
|
|
default:
|
|
puts("Tried to setup invalid DDR configuration\n");
|
|
hang();
|
|
}
|
|
|
|
mx6_dram_cfg(&cm_fx6_sysinfo_q, &cm_fx6_calib_q, &cm_fx6_ddr3_cfg_q);
|
|
udelay(100);
|
|
}
|
|
|
|
static int cm_fx6_spl_dram_init(void)
|
|
{
|
|
unsigned long bank1_size, bank2_size;
|
|
|
|
switch (get_cpu_type()) {
|
|
case MXC_CPU_MX6SOLO:
|
|
mx6sdl_dram_iocfg(64, &ddr_iomux_s, &grp_iomux_s);
|
|
|
|
spl_mx6s_dram_init(DDR_32BIT_1GB, false);
|
|
bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
|
|
bank2_size = get_ram_size((long int *)PHYS_SDRAM_2, 0x80000000);
|
|
if (bank1_size == 0x20000000) {
|
|
if (bank2_size == 0x20000000)
|
|
return 0;
|
|
|
|
spl_mx6s_dram_init(DDR_32BIT_512MB, true);
|
|
return 0;
|
|
}
|
|
|
|
spl_mx6s_dram_init(DDR_16BIT_256MB, true);
|
|
bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
|
|
if (bank1_size == 0x10000000)
|
|
return 0;
|
|
|
|
break;
|
|
case MXC_CPU_MX6D:
|
|
case MXC_CPU_MX6Q:
|
|
mx6dq_dram_iocfg(64, &ddr_iomux_q, &grp_iomux_q);
|
|
|
|
spl_mx6q_dram_init(DDR_64BIT_4GB, false);
|
|
bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
|
|
if (bank1_size == 0x80000000)
|
|
return 0;
|
|
|
|
if (bank1_size == 0x40000000) {
|
|
bank2_size = get_ram_size((long int *)PHYS_SDRAM_2,
|
|
0x80000000);
|
|
if (bank2_size == 0x40000000) {
|
|
/* Don't do a full reset here */
|
|
spl_mx6q_dram_init(DDR_64BIT_2GB, false);
|
|
} else {
|
|
spl_mx6q_dram_init(DDR_64BIT_1GB, true);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
spl_mx6q_dram_init(DDR_32BIT_512MB, true);
|
|
bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
|
|
if (bank1_size == 0x20000000)
|
|
return 0;
|
|
|
|
spl_mx6q_dram_init(DDR_16BIT_256MB, true);
|
|
bank1_size = get_ram_size((long int *)PHYS_SDRAM_1, 0x80000000);
|
|
if (bank1_size == 0x10000000)
|
|
return 0;
|
|
|
|
break;
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static iomux_v3_cfg_t const uart4_pads[] = {
|
|
IOMUX_PADS(PAD_KEY_COL0__UART4_TX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
|
|
IOMUX_PADS(PAD_KEY_ROW0__UART4_RX_DATA | MUX_PAD_CTRL(UART_PAD_CTRL)),
|
|
};
|
|
|
|
static void cm_fx6_setup_uart(void)
|
|
{
|
|
SETUP_IOMUX_PADS(uart4_pads);
|
|
enable_uart_clk(1);
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_SPI
|
|
static void cm_fx6_setup_ecspi(void)
|
|
{
|
|
cm_fx6_set_ecspi_iomux();
|
|
enable_spi_clk(1, 0);
|
|
}
|
|
#else
|
|
static void cm_fx6_setup_ecspi(void) { }
|
|
#endif
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
|
|
|
|
/*
|
|
* We don't use DMA in SPL, but we do need it in U-Boot. U-Boot
|
|
* initializes DMA very early (before all board code), so the only
|
|
* opportunity we have to initialize APBHDMA clocks is in SPL.
|
|
*/
|
|
setbits_le32(&mxc_ccm->CCGR0, MXC_CCM_CCGR0_APBHDMA_MASK);
|
|
enable_usdhc_clk(1, 2);
|
|
|
|
arch_cpu_init();
|
|
timer_init();
|
|
cm_fx6_setup_ecspi();
|
|
cm_fx6_setup_uart();
|
|
get_clocks();
|
|
preloader_console_init();
|
|
gpio_direction_output(CM_FX6_GREEN_LED, 1);
|
|
if (cm_fx6_spl_dram_init()) {
|
|
puts("!!!ERROR!!! DRAM detection failed!!!\n");
|
|
hang();
|
|
}
|
|
}
|
|
|
|
void board_boot_order(u32 *spl_boot_list)
|
|
{
|
|
spl_boot_list[0] = spl_boot_device();
|
|
switch (spl_boot_list[0]) {
|
|
case BOOT_DEVICE_SPI:
|
|
spl_boot_list[1] = BOOT_DEVICE_MMC1;
|
|
break;
|
|
case BOOT_DEVICE_MMC1:
|
|
spl_boot_list[1] = BOOT_DEVICE_SPI;
|
|
break;
|
|
}
|
|
}
|
|
|
|
#ifdef CONFIG_SPL_MMC
|
|
static struct fsl_esdhc_cfg usdhc_cfg = {
|
|
.esdhc_base = USDHC3_BASE_ADDR,
|
|
.max_bus_width = 4,
|
|
};
|
|
|
|
int board_mmc_init(struct bd_info *bis)
|
|
{
|
|
cm_fx6_set_usdhc_iomux();
|
|
|
|
usdhc_cfg.sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK);
|
|
|
|
return fsl_esdhc_initialize(bis, &usdhc_cfg);
|
|
}
|
|
#endif
|