mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-02 17:41:08 +00:00
056808a4bb
Proper U-Boot moves SPI0 CS0 Flash mapping from 0xD4000000 to 0xF4000000 and change its size from 64 MB to 8 MB. Definitions are already in MBUS_SPI_BASE/MBUS_SPI_SIZE macros. So define these macros also for SPL build, use them in env_sf_get_env_addr() function and move this function from spl.c to cpu.c to be available in Proper U-Boot too. Signed-off-by: Pali Rohár <pali@kernel.org>
361 lines
10 KiB
C
361 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2014-2016 Stefan Roese <sr@denx.de>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <cpu_func.h>
|
|
#include <dm.h>
|
|
#include <fdtdec.h>
|
|
#include <hang.h>
|
|
#include <image.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <spl.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/soc.h>
|
|
|
|
#if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) || defined(CONFIG_SPL_MMC) || \
|
|
defined(CONFIG_SPL_SATA)
|
|
|
|
/*
|
|
* When loading U-Boot via SPL from SPI NOR, CONFIG_SYS_SPI_U_BOOT_OFFS must
|
|
* point to the offset of kwbimage main header which is always at offset zero
|
|
* (defined by BootROM). Therefore other values of CONFIG_SYS_SPI_U_BOOT_OFFS
|
|
* makes U-Boot non-bootable.
|
|
*/
|
|
#ifdef CONFIG_SPL_SPI_FLASH_SUPPORT
|
|
#if defined(CONFIG_SYS_SPI_U_BOOT_OFFS) && CONFIG_SYS_SPI_U_BOOT_OFFS != 0
|
|
#error CONFIG_SYS_SPI_U_BOOT_OFFS must be set to 0
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* When loading U-Boot via SPL from eMMC, the kwbimage main header is stored at
|
|
* sector 0 and either on HW boot partition or on data partition. Choice of HW
|
|
* partition depends on what is configured in eMMC EXT_CSC register.
|
|
* When loading U-Boot via SPL from SD card, the kwbimage main header is stored
|
|
* at sector 1.
|
|
* Therefore MBR/GPT partition booting, fixed sector number and fixed eMMC HW
|
|
* partition number are unsupported due to limitation of Marvell BootROM.
|
|
* Correct sector number must be determined as runtime in mvebu SPL code based
|
|
* on the detected boot source. Otherwise U-Boot SPL would not be able to load
|
|
* U-Boot proper.
|
|
* Runtime mvebu SPL sector calculation code expects:
|
|
* - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET=0
|
|
* - CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0
|
|
*/
|
|
#ifdef CONFIG_SPL_MMC
|
|
#ifdef CONFIG_SYS_MMCSD_FS_BOOT
|
|
#error CONFIG_SYS_MMCSD_FS_BOOT is unsupported
|
|
#endif
|
|
#ifdef CONFIG_SYS_MMCSD_FS_BOOT_PARTITION
|
|
#error CONFIG_SYS_MMCSD_FS_BOOT_PARTITION is unsupported
|
|
#endif
|
|
#ifdef CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG
|
|
#error CONFIG_SUPPORT_EMMC_BOOT_OVERRIDE_PART_CONFIG is unsupported
|
|
#endif
|
|
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION
|
|
#error CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION is unsupported
|
|
#endif
|
|
#ifdef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION
|
|
#error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION is unsupported
|
|
#endif
|
|
#ifndef CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR
|
|
#error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR must be enabled for SD/eMMC boot support
|
|
#endif
|
|
#if !defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR) || \
|
|
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR != 0
|
|
#error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR must be set to 0
|
|
#endif
|
|
#if !defined(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET) || \
|
|
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET != 0
|
|
#error CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_DATA_PART_OFFSET must be set to 0
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* When loading U-Boot via SPL from SATA disk, the kwbimage main header is
|
|
* stored at sector 1. Therefore CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be
|
|
* set to 1. Otherwise U-Boot SPL would not be able to load U-Boot proper.
|
|
*/
|
|
#ifdef CONFIG_SPL_SATA
|
|
#if !defined(CONFIG_SPL_SATA_RAW_U_BOOT_USE_SECTOR) || \
|
|
!defined(CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR) || CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR != 1
|
|
#error CONFIG_SPL_SATA_RAW_U_BOOT_SECTOR must be set to 1
|
|
#endif
|
|
#endif
|
|
|
|
/* Boot Type - block ID */
|
|
#define IBR_HDR_I2C_ID 0x4D
|
|
#define IBR_HDR_SPI_ID 0x5A
|
|
#define IBR_HDR_NAND_ID 0x8B
|
|
#define IBR_HDR_SATA_ID 0x78
|
|
#define IBR_HDR_PEX_ID 0x9C
|
|
#define IBR_HDR_UART_ID 0x69
|
|
#define IBR_HDR_SDIO_ID 0xAE
|
|
|
|
/* Structure of the main header, version 1 (Armada 370/XP/375/38x/39x) */
|
|
struct kwbimage_main_hdr_v1 {
|
|
u8 blockid; /* 0x0 */
|
|
u8 flags; /* 0x1 */
|
|
u16 nandpagesize; /* 0x2-0x3 */
|
|
u32 blocksize; /* 0x4-0x7 */
|
|
u8 version; /* 0x8 */
|
|
u8 headersz_msb; /* 0x9 */
|
|
u16 headersz_lsb; /* 0xA-0xB */
|
|
u32 srcaddr; /* 0xC-0xF */
|
|
u32 destaddr; /* 0x10-0x13 */
|
|
u32 execaddr; /* 0x14-0x17 */
|
|
u8 options; /* 0x18 */
|
|
u8 nandblocksize; /* 0x19 */
|
|
u8 nandbadblklocation; /* 0x1A */
|
|
u8 reserved4; /* 0x1B */
|
|
u16 reserved5; /* 0x1C-0x1D */
|
|
u8 ext; /* 0x1E */
|
|
u8 checksum; /* 0x1F */
|
|
} __packed;
|
|
|
|
#ifdef CONFIG_SPL_MMC
|
|
u32 spl_mmc_boot_mode(struct mmc *mmc, const u32 boot_device)
|
|
{
|
|
return IS_SD(mmc) ? MMCSD_MODE_RAW : MMCSD_MODE_EMMCBOOT;
|
|
}
|
|
unsigned long spl_mmc_get_uboot_raw_sector(struct mmc *mmc,
|
|
unsigned long raw_sect)
|
|
{
|
|
return IS_SD(mmc) ? 1 : 0;
|
|
}
|
|
#endif
|
|
|
|
static u32 checksum32(void *start, u32 len)
|
|
{
|
|
u32 csum = 0;
|
|
u32 *p = start;
|
|
|
|
while (len > 0) {
|
|
csum += *p++;
|
|
len -= sizeof(u32);
|
|
};
|
|
|
|
return csum;
|
|
}
|
|
|
|
int spl_check_board_image(struct spl_image_info *spl_image,
|
|
const struct spl_boot_device *bootdev)
|
|
{
|
|
u32 csum = *(u32 *)(spl_image->load_addr + spl_image->size - 4);
|
|
|
|
if (checksum32((void *)spl_image->load_addr,
|
|
spl_image->size - 4) != csum) {
|
|
printf("ERROR: Invalid data checksum in kwbimage\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int spl_parse_board_header(struct spl_image_info *spl_image,
|
|
const struct spl_boot_device *bootdev,
|
|
const void *image_header, size_t size)
|
|
{
|
|
const struct kwbimage_main_hdr_v1 *mhdr = image_header;
|
|
|
|
if (size < sizeof(*mhdr)) {
|
|
/* This should be compile time assert */
|
|
printf("FATAL ERROR: Image header size is too small\n");
|
|
hang();
|
|
}
|
|
|
|
/*
|
|
* Very basic check for image validity. We cannot check mhdr->checksum
|
|
* as it is calculated also from variable length extended headers
|
|
* (including SPL content) which is not included in U-Boot image_header.
|
|
*/
|
|
if (mhdr->version != 1 ||
|
|
((mhdr->headersz_msb << 16) | mhdr->headersz_lsb) < sizeof(*mhdr)) {
|
|
printf("ERROR: Invalid kwbimage v1\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_SPL_SPI_FLASH_SUPPORT) &&
|
|
bootdev->boot_device == BOOT_DEVICE_SPI &&
|
|
mhdr->blockid != IBR_HDR_SPI_ID) {
|
|
printf("ERROR: Wrong blockid (0x%x) in SPI kwbimage\n",
|
|
mhdr->blockid);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_SPL_SATA) &&
|
|
bootdev->boot_device == BOOT_DEVICE_SATA &&
|
|
mhdr->blockid != IBR_HDR_SATA_ID) {
|
|
printf("ERROR: Wrong blockid (0x%x) in SATA kwbimage\n",
|
|
mhdr->blockid);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_SPL_MMC) &&
|
|
(bootdev->boot_device == BOOT_DEVICE_MMC1) &&
|
|
mhdr->blockid != IBR_HDR_SDIO_ID) {
|
|
printf("ERROR: Wrong blockid (0x%x) in SDIO kwbimage\n",
|
|
mhdr->blockid);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spl_image->offset = mhdr->srcaddr;
|
|
|
|
/*
|
|
* For SATA srcaddr is specified in number of sectors.
|
|
* This expects that sector size is 512 bytes.
|
|
*/
|
|
if (IS_ENABLED(CONFIG_SPL_SATA) && mhdr->blockid == IBR_HDR_SATA_ID)
|
|
spl_image->offset *= 512;
|
|
|
|
if (spl_image->offset % 4 != 0) {
|
|
printf("ERROR: Wrong srcaddr (0x%08x) in kwbimage\n",
|
|
spl_image->offset);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (mhdr->blocksize <= 4 || mhdr->blocksize % 4 != 0) {
|
|
printf("ERROR: Wrong blocksize (0x%08x) in kwbimage\n",
|
|
mhdr->blocksize);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spl_image->size = mhdr->blocksize;
|
|
spl_image->entry_point = mhdr->execaddr;
|
|
spl_image->load_addr = mhdr->destaddr;
|
|
spl_image->os = IH_OS_U_BOOT;
|
|
spl_image->name = "U-Boot";
|
|
|
|
return 0;
|
|
}
|
|
|
|
u32 spl_boot_device(void)
|
|
{
|
|
u32 boot_device = get_boot_device();
|
|
|
|
switch (boot_device) {
|
|
/*
|
|
* Return to the BootROM to continue the Marvell xmodem
|
|
* UART boot protocol. As initiated by the kwboot tool.
|
|
*
|
|
* This can only be done by the BootROM since the beginning
|
|
* of the image is already read and interpreted by the BootROM.
|
|
* SPL has no chance to receive this information. So we
|
|
* need to return to the BootROM to enable this xmodem
|
|
* UART download. Use SPL infrastructure to return to BootROM.
|
|
*/
|
|
case BOOT_DEVICE_UART:
|
|
return BOOT_DEVICE_BOOTROM;
|
|
|
|
/*
|
|
* If SPL is compiled with chosen boot_device support
|
|
* then use SPL driver for loading U-Boot proper.
|
|
*/
|
|
#ifdef CONFIG_SPL_MMC
|
|
case BOOT_DEVICE_MMC1:
|
|
return BOOT_DEVICE_MMC1;
|
|
#endif
|
|
#ifdef CONFIG_SPL_SATA
|
|
case BOOT_DEVICE_SATA:
|
|
return BOOT_DEVICE_SATA;
|
|
#endif
|
|
#ifdef CONFIG_SPL_SPI_FLASH_SUPPORT
|
|
case BOOT_DEVICE_SPI:
|
|
return BOOT_DEVICE_SPI;
|
|
#endif
|
|
|
|
/*
|
|
* If SPL is not compiled with chosen boot_device support
|
|
* then return to the BootROM. BootROM supports loading
|
|
* U-Boot proper from any valid boot_device present in SAR
|
|
* register.
|
|
*/
|
|
default:
|
|
return BOOT_DEVICE_BOOTROM;
|
|
}
|
|
}
|
|
|
|
void board_boot_order(u32 *spl_boot_list)
|
|
{
|
|
spl_boot_list[0] = spl_boot_device();
|
|
if (spl_boot_list[0] != BOOT_DEVICE_BOOTROM)
|
|
spl_boot_list[1] = BOOT_DEVICE_BOOTROM;
|
|
}
|
|
|
|
#else
|
|
|
|
u32 spl_boot_device(void)
|
|
{
|
|
return BOOT_DEVICE_BOOTROM;
|
|
}
|
|
|
|
#endif
|
|
|
|
int board_return_to_bootrom(struct spl_image_info *spl_image,
|
|
struct spl_boot_device *bootdev)
|
|
{
|
|
u32 *regs = *(u32 **)(CONFIG_SPL_STACK + 4);
|
|
|
|
printf("Returning to BootROM (return address 0x%08x)...\n", regs[13]);
|
|
return_to_bootrom();
|
|
|
|
/* NOTREACHED - return_to_bootrom() does not return */
|
|
hang();
|
|
}
|
|
|
|
void board_init_f(ulong dummy)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Pin muxing needs to be done before UART output, since
|
|
* on A38x the UART pins need some re-muxing for output
|
|
* to work.
|
|
*/
|
|
board_early_init_f();
|
|
|
|
/*
|
|
* Use special translation offset for SPL. This needs to be
|
|
* configured *before* spl_init() is called as this function
|
|
* calls dm_init() which calls the bind functions of the
|
|
* device drivers. Here the base address needs to be configured
|
|
* (translated) correctly.
|
|
*/
|
|
gd->translation_offset = 0xd0000000 - 0xf1000000;
|
|
|
|
ret = spl_init();
|
|
if (ret) {
|
|
printf("spl_init() failed: %d\n", ret);
|
|
hang();
|
|
}
|
|
|
|
preloader_console_init();
|
|
|
|
/* Armada 375 does not support SerDes and DDR3 init yet */
|
|
#if !defined(CONFIG_ARMADA_375)
|
|
/* First init the serdes PHY's */
|
|
serdes_phy_config();
|
|
|
|
/* Setup DDR */
|
|
ret = ddr3_init();
|
|
if (ret) {
|
|
printf("ddr3_init() failed: %d\n", ret);
|
|
if (IS_ENABLED(CONFIG_DDR_RESET_ON_TRAINING_FAILURE) &&
|
|
get_boot_device() != BOOT_DEVICE_UART)
|
|
reset_cpu();
|
|
else
|
|
hang();
|
|
}
|
|
#endif
|
|
|
|
/* Initialize Auto Voltage Scaling */
|
|
mv_avs_init();
|
|
|
|
/* Update read timing control for PCIe */
|
|
mv_rtc_config();
|
|
}
|