mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
5a3dfef732
- increase CFG_FLASH_ERASE_TOUT from 2 to 15 seconds - use CFG_FLASH_WRITE_TOUT for programming instead of CFG_FLASH_ERASE_TOUT - remove "Unlock Bypass" mode, because macronix flashes do not support this mode officially - fix flash reset command from 0x00FF to 0x00F0. 0x00FF is only specified for Intel compatible flashes, not for AMD compatible. Patch by Martin Krause, 15 Feb 2006
428 lines
14 KiB
C
428 lines
14 KiB
C
/*
|
|
* (C) Copyright 2002-2005
|
|
* Gary Jennejohn <gj@denx.de>
|
|
*
|
|
* Configuation settings for the TRAB board.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* Default configuration is with 8 MB Flash, 32 MB RAM
|
|
*/
|
|
#if (!defined(CONFIG_FLASH_8MB)) && (!defined(CONFIG_FLASH_16MB))
|
|
# define CONFIG_FLASH_8MB /* 8 MB Flash */
|
|
#endif
|
|
#if (!defined(CONFIG_RAM_16MB)) && (!defined(CONFIG_RAM_32MB))
|
|
# define CONFIG_RAM_32MB /* 32 MB SDRAM */
|
|
#endif
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
#define CONFIG_ARM920T 1 /* This is an arm920t CPU */
|
|
#define CONFIG_S3C2400 1 /* in a SAMSUNG S3C2400 SoC */
|
|
#define CONFIG_TRAB 1 /* on a TRAB Board */
|
|
#undef CONFIG_TRAB_50MHZ /* run the CPU at 50 MHz */
|
|
#define LITTLEENDIAN 1 /* used by usb_ohci.c */
|
|
|
|
/* automatic software updates (see board/trab/auto_update.c) */
|
|
#define CONFIG_AUTO_UPDATE 1
|
|
|
|
/* input clock of PLL */
|
|
#define CONFIG_SYS_CLK_FREQ 12000000 /* TRAB has 12 MHz input clock */
|
|
|
|
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
|
|
|
|
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
|
|
#define CONFIG_SETUP_MEMORY_TAGS 1
|
|
#define CONFIG_INITRD_TAG 1
|
|
|
|
#define CFG_DEVICE_NULLDEV 1 /* enble null device */
|
|
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
|
|
|
|
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
|
|
|
/***********************************************************
|
|
* I2C stuff:
|
|
* the TRAB is equipped with an ATMEL 24C04 EEPROM at
|
|
* address 0x54 with 8bit addressing
|
|
***********************************************************/
|
|
#define CONFIG_HARD_I2C /* I2C with hardware support */
|
|
#define CFG_I2C_SPEED 100000 /* I2C speed */
|
|
#define CFG_I2C_SLAVE 0x7F /* I2C slave addr */
|
|
|
|
#define CFG_I2C_EEPROM_ADDR 0x54 /* EEPROM address */
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* 1 address byte */
|
|
|
|
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 3 /* 8 bytes page write mode on 24C04 */
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
|
|
|
|
/* USB stuff */
|
|
#define CONFIG_USB_OHCI 1
|
|
#define CONFIG_USB_STORAGE 1
|
|
#define CONFIG_DOS_PARTITION 1
|
|
|
|
/*
|
|
* Size of malloc() pool
|
|
*/
|
|
#define CFG_MALLOC_LEN (CFG_ENV_SIZE + 128*1024)
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
|
|
/*
|
|
* Hardware drivers
|
|
*/
|
|
#define CONFIG_DRIVER_CS8900 1 /* we have a CS8900 on-board */
|
|
#define CS8900_BASE 0x07000300 /* agrees with WIN CE PA */
|
|
#define CS8900_BUS16 1 /* the Linux driver does accesses as shorts */
|
|
|
|
#define CONFIG_DRIVER_S3C24X0_I2C 1 /* we use the buildin I2C controller */
|
|
|
|
#define CONFIG_VFD 1 /* VFD linear frame buffer driver */
|
|
#define VFD_TEST_LOGO 1 /* output a test logo to the VFDs */
|
|
|
|
/*
|
|
* select serial console configuration
|
|
*/
|
|
#define CONFIG_SERIAL1 1 /* we use SERIAL 1 on TRAB */
|
|
|
|
#define CONFIG_HWFLOW /* include RTS/CTS flow control support */
|
|
|
|
#define CONFIG_MODEM_SUPPORT 1 /* enable modem initialization stuff */
|
|
|
|
#define CONFIG_MODEM_KEY_MAGIC "23" /* hold down these keys to enable modem */
|
|
|
|
/*
|
|
* The following enables modem debugging stuff. The dbg() and
|
|
* 'char screen[1024]' are used for debug printfs. Unfortunately,
|
|
* it is usable only from BDI
|
|
*/
|
|
#undef CONFIG_MODEM_SUPPORT_DEBUG
|
|
|
|
/* allow to overwrite serial and ethaddr */
|
|
#define CONFIG_ENV_OVERWRITE
|
|
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#define CONFIG_TIMESTAMP 1 /* Print timestamp info for images */
|
|
|
|
/* Use s3c2400's RTC */
|
|
#define CONFIG_RTC_S3C24X0 1
|
|
|
|
#ifdef CONFIG_HWFLOW
|
|
#define CONFIG_COMMANDS_ADD_HWFLOW CFG_CMD_HWFLOW
|
|
#else
|
|
#define CONFIG_COMMANDS_ADD_HWFLOW 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_VFD
|
|
#define CONFIG_COMMANDS_ADD_VFD CFG_CMD_VFD
|
|
#else
|
|
#define CONFIG_COMMANDS_ADD_VFD 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_DRIVER_S3C24X0_I2C
|
|
#define CONFIG_COMMANDS_ADD_EEPROM CFG_CMD_EEPROM
|
|
#define CONFIG_COMMANDS_I2C CFG_CMD_I2C
|
|
#else
|
|
#define CONFIG_COMMANDS_ADD_EEPROM 0
|
|
#define CONFIG_COMMANDS_I2C 0
|
|
#endif
|
|
|
|
#ifndef USE_920T_MMU
|
|
#define CONFIG_COMMANDS ((CONFIG_CMD_DFL & ~CFG_CMD_CACHE) | \
|
|
CONFIG_COMMANDS_ADD_HWFLOW | \
|
|
CONFIG_COMMANDS_ADD_VFD | \
|
|
CONFIG_COMMANDS_ADD_EEPROM | \
|
|
CONFIG_COMMANDS_I2C | \
|
|
CFG_CMD_BSP | \
|
|
CFG_CMD_DATE | \
|
|
CFG_CMD_DHCP | \
|
|
CFG_CMD_FAT | \
|
|
CFG_CMD_NFS | \
|
|
CFG_CMD_SNTP | \
|
|
CFG_CMD_USB )
|
|
#else
|
|
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
|
CONFIG_COMMANDS_ADD_HWFLOW | \
|
|
CONFIG_COMMANDS_ADD_VFD | \
|
|
CONFIG_COMMANDS_ADD_EEPROM | \
|
|
CONFIG_COMMANDS_I2C | \
|
|
CFG_CMD_BSP | \
|
|
CFG_CMD_DATE | \
|
|
CFG_CMD_DHCP | \
|
|
CFG_CMD_FAT | \
|
|
CFG_CMD_NFS | \
|
|
CFG_CMD_SNTP | \
|
|
CFG_CMD_USB )
|
|
#endif
|
|
|
|
/* moved up */
|
|
#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* allow to break in always */
|
|
#define CONFIG_PREBOOT "echo;echo *** booting ***;echo"
|
|
#define CONFIG_BOOTARGS "console=ttyS0"
|
|
#define CONFIG_NETMASK 255.255.0.0
|
|
#define CONFIG_IPADDR 192.168.3.68
|
|
#define CONFIG_HOSTNAME trab
|
|
#define CONFIG_SERVERIP 192.168.3.1
|
|
#define CONFIG_BOOTCOMMAND "burn_in"
|
|
|
|
#ifndef CONFIG_FLASH_8MB /* current config: 16 MB flash */
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
|
|
"add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 ${u-boot}\0" \
|
|
"update=protect off 0 5FFFF;era 0 5FFFF;" \
|
|
"cp.b C100000 0 $filesize\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=c400000\0" \
|
|
"net_load=tftpboot $loadaddr $loadfile\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=00060000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#else /* !CFG_HUSH_PARSER */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
|
|
"add_misc=setenv bootargs ${bootargs} console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 ${u-boot}\0" \
|
|
"update=protect off 0 5FFFF;era 0 5FFFF;" \
|
|
"cp.b C100000 0 ${filesize}\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=c400000\0" \
|
|
"net_load=tftpboot ${loadaddr} ${loadfile}\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=000C0000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm ${kernel_addr}\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#endif /* CFG_HUSH_PARSER */
|
|
#else /* CONFIG_FLASH_8MB => 8 MB flash */
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=$serverip:$rootpath\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs $bootargs ethaddr=$ethaddr " \
|
|
"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname::off\0" \
|
|
"add_misc=setenv bootargs $bootargs console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 ${u-boot}\0" \
|
|
"update=protect off 0 3FFFF;era 0 3FFFF;" \
|
|
"cp.b C100000 0 $filesize;" \
|
|
"setenv filesize;saveenv\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=C400000\0" \
|
|
"net_load=tftpboot $loadaddr $loadfile\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=000C0000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm $kernel_addr\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#else /* !CFG_HUSH_PARSER */
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"nfs_args=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"rootpath=/opt/eldk/arm_920TDI\0" \
|
|
"ram_args=setenv bootargs root=/dev/ram rw\0" \
|
|
"add_net=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off\0" \
|
|
"add_misc=setenv bootargs ${bootargs} console=ttyS0 panic=1\0" \
|
|
"u-boot=/tftpboot/TRAB/u-boot.bin\0" \
|
|
"load=tftp C100000 ${u-boot}\0" \
|
|
"update=protect off 0 3FFFF;era 0 3FFFF;" \
|
|
"cp.b C100000 0 ${filesize};" \
|
|
"setenv filesize;saveenv\0" \
|
|
"loadfile=/tftpboot/TRAB/uImage\0" \
|
|
"loadaddr=C400000\0" \
|
|
"net_load=tftpboot ${loadaddr} ${loadfile}\0" \
|
|
"net_nfs=run net_load nfs_args add_net add_misc;bootm\0" \
|
|
"kernel_addr=000C0000\0" \
|
|
"flash_nfs=run nfs_args add_net add_misc;bootm ${kernel_addr}\0" \
|
|
"mdm_init1=ATZ\0" \
|
|
"mdm_init2=ATS0=1\0" \
|
|
"mdm_flow_control=rts/cts\0"
|
|
#endif /* CFG_HUSH_PARSER */
|
|
#endif /* CONFIG_FLASH_8MB */
|
|
|
|
#if 1 /* feel free to disable for development */
|
|
#define CONFIG_AUTOBOOT_KEYED /* Enable password protection */
|
|
#define CONFIG_AUTOBOOT_PROMPT "\nEnter password - autoboot in %d sec...\n"
|
|
#define CONFIG_AUTOBOOT_DELAY_STR "R" /* 1st "password" */
|
|
#endif
|
|
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
|
|
/* what's this ? it's not used anywhere */
|
|
#define CONFIG_KGDB_SER_INDEX 1 /* which serial port to use */
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "TRAB # " /* Monitor Command Prompt */
|
|
#ifdef CFG_HUSH_PARSER
|
|
#define CFG_PROMPT_HUSH_PS2 "> "
|
|
#endif
|
|
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CFG_MEMTEST_START 0x0C000000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x0D000000 /* 16 MB in DRAM */
|
|
|
|
#undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */
|
|
|
|
#define CFG_LOAD_ADDR 0x0CF00000 /* default load address */
|
|
|
|
#ifdef CONFIG_TRAB_50MHZ
|
|
/* the PWM TImer 4 uses a counter of 15625 for 10 ms, so we need */
|
|
/* it to wrap 100 times (total 1562500) to get 1 sec. */
|
|
/* this should _really_ be calculated !! */
|
|
#define CFG_HZ 1562500
|
|
#else
|
|
/* the PWM TImer 4 uses a counter of 10390 for 10 ms, so we need */
|
|
/* it to wrap 100 times (total 1039000) to get 1 sec. */
|
|
/* this should _really_ be calculated !! */
|
|
#define CFG_HZ 1039000
|
|
#endif
|
|
|
|
/* valid baudrates */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
|
|
|
|
#define CONFIG_MISC_INIT_R /* have misc_init_r() function */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* burn-in test stuff.
|
|
*
|
|
* BURN_IN_CYCLE_DELAY defines the seconds to wait between each burn-in cycle
|
|
* Because the burn-in test itself causes also an delay of about 4 seconds,
|
|
* this time must be subtracted from the desired overall burn-in cycle time.
|
|
*/
|
|
#define BURN_IN_CYCLE_DELAY 296 /* seconds between burn-in cycles */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Stack sizes
|
|
*
|
|
* The stack sizes are set up in start.S using the settings below
|
|
*/
|
|
#define CONFIG_STACKSIZE (128*1024) /* regular stack */
|
|
#ifdef CONFIG_USE_IRQ
|
|
#define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */
|
|
#define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Physical Memory Map
|
|
*/
|
|
#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
|
|
#define PHYS_SDRAM_1 0x0C000000 /* SDRAM Bank #1 */
|
|
#ifndef CONFIG_RAM_16MB
|
|
#define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */
|
|
#else
|
|
#define PHYS_SDRAM_1_SIZE 0x01000000 /* 16 MB */
|
|
#endif
|
|
|
|
#define CFG_FLASH_BASE 0x00000000 /* Flash Bank #1 */
|
|
|
|
/* The following #defines are needed to get flash environment right */
|
|
#define CFG_MONITOR_BASE CFG_FLASH_BASE
|
|
#define CFG_MONITOR_LEN (256 << 10)
|
|
|
|
/* Dynamic MTD partition support */
|
|
#define CONFIG_JFFS2_CMDLINE
|
|
#define MTDIDS_DEFAULT "nor0=0"
|
|
|
|
/* production flash layout */
|
|
#define MTDPARTS_DEFAULT "mtdparts=0:16k(Firmware1)ro," \
|
|
"16k(Env1)," \
|
|
"16k(Env2)," \
|
|
"336k(Firmware2)ro," \
|
|
"896k(Kernel)," \
|
|
"5376k(Root-FS)," \
|
|
"1408k(JFFS2)," \
|
|
"-(VFD)"
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH and environment organization
|
|
*/
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#ifndef CONFIG_FLASH_8MB
|
|
#define CFG_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
|
|
#else
|
|
#define CFG_MAX_FLASH_SECT 71 /* max number of sectors on one chip */
|
|
#endif
|
|
|
|
/* timeout values are in ticks */
|
|
#define CFG_FLASH_ERASE_TOUT (15*CFG_HZ) /* Timeout for Flash Erase */
|
|
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
|
|
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
|
|
/* Address and size of Primary Environment Sector */
|
|
#ifndef CONFIG_FLASH_8MB
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x60000)
|
|
#define CFG_ENV_SIZE 0x4000
|
|
#define CFG_ENV_SECT_SIZE 0x20000
|
|
#else
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000)
|
|
#define CFG_ENV_SIZE 0x4000
|
|
#define CFG_ENV_SECT_SIZE 0x4000
|
|
#endif
|
|
|
|
/* Address and size of Redundant Environment Sector */
|
|
#define CFG_ENV_OFFSET_REDUND (CFG_ENV_ADDR+CFG_ENV_SECT_SIZE)
|
|
#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
|
|
|
|
/* Initial value of the on-board touch screen brightness */
|
|
#define CFG_BRIGHTNESS 0x20
|
|
|
|
#endif /* __CONFIG_H */
|