u-boot/arch/arm/mach-imx/imx8/Kconfig
Marcel Ziswiler 3d60366500 board: toradex: add apalis imx8qm 4gb wb it v1.0b module support
This commit adds initial support for the Toradex Apalis iMX8QM 4GB WB IT
V1.0B module. Unlike the V1.0A early access samples exclusively booting
from SD card, they are now strapped to boot from eFuses which are
factory fused to properly boot from their on-module eMMC. U-Boot
supports either booting from the on-module eMMC or may be used for
recovery purpose using the universal update utility (uuu) aka mfgtools
3.0.

Functionality wise the following is known to be working:
- eMMC, 8-bit and 4-bit MMC/SD card slots
- Gigabit Ethernet
- GPIOs
- I2C

Unfortunately, there is no USB functionality for the i.MX 8QM as of yet.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Max Krummenacher <max.krummenacher@toradex.com>
2019-06-11 10:42:48 +02:00

57 lines
1 KiB
Text

if ARCH_IMX8
config IMX8
bool
config MU_BASE_SPL
hex "MU base address used in SPL"
default 0x5d1b0000
help
SPL runs in EL3 mode, it use MU0_A to communicate with SCU.
So we could not reuse the one in dts which is for normal U-Boot.
config IMX8QM
select IMX8
select SUPPORT_SPL
bool
config IMX8QXP
select IMX8
select SUPPORT_SPL
bool
config SYS_SOC
default "imx8"
choice
prompt "i.MX8 board select"
optional
config TARGET_APALIS_IMX8
bool "Support Apalis iMX8 module"
select BOARD_LATE_INIT
select IMX8QM
config TARGET_COLIBRI_IMX8X
bool "Support Colibri iMX8X module"
select BOARD_LATE_INIT
select IMX8QXP
config TARGET_IMX8QM_MEK
bool "Support i.MX8QM MEK board"
select BOARD_LATE_INIT
select IMX8QM
config TARGET_IMX8QXP_MEK
bool "Support i.MX8QXP MEK board"
select BOARD_LATE_INIT
select IMX8QXP
endchoice
source "board/freescale/imx8qm_mek/Kconfig"
source "board/freescale/imx8qxp_mek/Kconfig"
source "board/toradex/apalis-imx8/Kconfig"
source "board/toradex/colibri-imx8x/Kconfig"
endif