u-boot/arch/arm/mach-rockchip/rk3036/sdram_rk3036.c
Kever Yang 64a524b08a rockchip: rk3036: sync os_reg2 define with other soc
Rockchip using the same bit definition for dram info and write
to os_reg, the col and bw info is not correct and let's fix it.

Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
2017-07-11 12:13:48 +02:00

769 lines
19 KiB
C

/*
* (C) Copyright 2015 Google, Inc
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/types.h>
#include <asm/arch/cru_rk3036.h>
#include <asm/arch/grf_rk3036.h>
#include <asm/arch/hardware.h>
#include <asm/arch/sdram_rk3036.h>
#include <asm/arch/timer.h>
#include <asm/arch/uart.h>
/*
* we can not fit the code to access the device tree in SPL
* (due to 4K SRAM size limits), so these are hard-coded
*/
#define CRU_BASE 0x20000000
#define GRF_BASE 0x20008000
#define DDR_PHY_BASE 0x2000a000
#define DDR_PCTL_BASE 0x20004000
#define CPU_AXI_BUS_BASE 0x10128000
struct rk3036_sdram_priv {
struct rk3036_cru *cru;
struct rk3036_grf *grf;
struct rk3036_ddr_phy *phy;
struct rk3036_ddr_pctl *pctl;
struct rk3036_service_sys *axi_bus;
/* ddr die config */
struct rk3036_ddr_config ddr_config;
};
/* use integer mode, 396MHz dpll setting
* refdiv, fbdiv, postdiv1, postdiv2
*/
const struct pll_div dpll_init_cfg = {1, 50, 3, 1};
/* 396Mhz ddr timing */
const struct rk3036_ddr_timing ddr_timing = {0x18c,
{0x18c, 0xc8, 0x1f4, 0x27, 0x4e,
0x4, 0x8b, 0x06, 0x03, 0x0, 0x06, 0x05, 0x0f, 0x15, 0x06, 0x04, 0x04,
0x06, 0x04, 0x200, 0x03, 0x0a, 0x40, 0x2710, 0x01, 0x05, 0x05, 0x03,
0x0c, 0x28, 0x100, 0x0, 0x04, 0x0},
{{0x420, 0x42, 0x0, 0x0}, 0x01, 0x60},
{0x24717315} };
/*
* [7:6] bank(n:n bit bank)
* [5:4] row(13+n)
* [3] cs(0:1 cs, 1:2 cs)
* [2:1] bank(n:n bit bank)
* [0] col(10+n)
*/
const char ddr_cfg_2_rbc[] = {
((3 << 6) | (3 << 4) | (0 << 3) | (0 << 1) | 1),
((0 << 6) | (1 << 4) | (0 << 3) | (3 << 1) | 0),
((0 << 6) | (2 << 4) | (0 << 3) | (3 << 1) | 0),
((0 << 6) | (3 << 4) | (0 << 3) | (3 << 1) | 0),
((0 << 6) | (1 << 4) | (0 << 3) | (3 << 1) | 1),
((0 << 6) | (2 << 4) | (0 << 3) | (3 << 1) | 1),
((0 << 6) | (3 << 4) | (0 << 3) | (3 << 1) | 1),
((0 << 6) | (0 << 4) | (0 << 3) | (3 << 1) | 0),
((0 << 6) | (0 << 4) | (0 << 3) | (3 << 1) | 1),
((0 << 6) | (3 << 4) | (1 << 3) | (3 << 1) | 0),
((0 << 6) | (3 << 4) | (1 << 3) | (3 << 1) | 1),
((1 << 6) | (2 << 4) | (0 << 3) | (2 << 1) | 0),
((3 << 6) | (2 << 4) | (0 << 3) | (0 << 1) | 1),
((3 << 6) | (3 << 4) | (0 << 3) | (0 << 1) | 0),
};
/* DDRPHY REG */
enum {
/* DDRPHY_REG1 */
SOFT_RESET_MASK = 3,
SOFT_RESET_SHIFT = 2,
/* DDRPHY_REG2 */
MEMORY_SELECT_DDR3 = 0 << 6,
DQS_SQU_CAL_NORMAL_MODE = 0 << 1,
DQS_SQU_CAL_START = 1 << 0,
DQS_SQU_NO_CAL = 0 << 0,
/* DDRPHY_REG2A */
CMD_DLL_BYPASS = 1 << 4,
CMD_DLL_BYPASS_DISABLE = 0 << 4,
HIGH_8BIT_DLL_BYPASS = 1 << 3,
HIGH_8BIT_DLL_BYPASS_DISABLE = 0 << 3,
LOW_8BIT_DLL_BYPASS = 1 << 2,
LOW_8BIT_DLL_BYPASS_DISABLE = 0 << 2,
/* DDRPHY_REG19 */
CMD_FEEDBACK_ENABLE = 1 << 5,
CMD_SLAVE_DLL_INVERSE_MODE = 1 << 4,
CMD_SLAVE_DLL_NO_INVERSE_MODE = 0 << 4,
CMD_SLAVE_DLL_ENALBE = 1 << 3,
CMD_TX_SLAVE_DLL_DELAY_MASK = 7,
CMD_TX_SLAVE_DLL_DELAY_SHIFT = 0,
/* DDRPHY_REG6 */
LEFT_CHN_TX_DQ_PHASE_BYPASS_90 = 1 << 4,
LEFT_CHN_TX_DQ_PHASE_BYPASS_0 = 0 << 4,
LEFT_CHN_TX_DQ_DLL_ENABLE = 1 << 3,
LEFT_CHN_TX_DQ_DLL_DELAY_MASK = 7,
LEFT_CHN_TX_DQ_DLL_DELAY_SHIFT = 0,
/* DDRPHY_REG8 */
LEFT_CHN_RX_DQS_DELAY_TAP_MASK = 3,
LEFT_CHN_RX_DQS_DELAY_TAP_SHIFT = 0,
/* DDRPHY_REG9 */
RIGHT_CHN_TX_DQ_PHASE_BYPASS_90 = 1 << 4,
RIGHT_CHN_TX_DQ_PHASE_BYPASS_0 = 0 << 4,
RIGHT_CHN_TX_DQ_DLL_ENABLE = 1 << 3,
RIGHT_CHN_TX_DQ_DLL_DELAY_MASK = 7,
RIGHT_CHN_TX_DQ_DLL_DELAY_SHIFT = 0,
/* DDRPHY_REG11 */
RIGHT_CHN_RX_DQS_DELAY_TAP_MASK = 3,
RIGHT_CHN_RX_DQS_DELAY_TAP_SHIFT = 0,
/* DDRPHY_REG62 */
CAL_DONE_MASK = 3,
HIGH_8BIT_CAL_DONE = 1 << 1,
LOW_8BIT_CAL_DONE = 1 << 0,
};
/* PTCL */
enum {
/* PCTL_DFISTCFG0 */
DFI_INIT_START = 1 << 0,
DFI_DATA_BYTE_DISABLE_EN = 1 << 2,
/* PCTL_DFISTCFG1 */
DFI_DRAM_CLK_SR_EN = 1 << 0,
DFI_DRAM_CLK_DPD_EN = 1 << 1,
/* PCTL_DFISTCFG2 */
DFI_PARITY_INTR_EN = 1 << 0,
DFI_PARITY_EN = 1 << 1,
/* PCTL_DFILPCFG0 */
TLP_RESP_TIME_SHIFT = 16,
LP_SR_EN = 1 << 8,
LP_PD_EN = 1 << 0,
/* PCTL_DFIODTCFG */
RANK0_ODT_WRITE_SEL = 1 << 3,
RANK1_ODT_WRITE_SEL = 1 << 11,
/* PCTL_DFIODTCFG1 */
ODT_LEN_BL8_W_SHIFT = 16,
/* PCTL_MCFG */
TFAW_CFG_MASK = 3,
TFAW_CFG_SHIFT = 18,
PD_EXIT_SLOW_MODE = 0 << 17,
PD_ACTIVE_POWER_DOWN = 1 << 16,
PD_IDLE_MASK = 0xff,
PD_IDLE_SHIFT = 8,
MEM_BL4 = 0 << 0,
MEM_BL8 = 1 << 0,
/* PCTL_MCFG1 */
HW_EXIT_IDLE_EN_MASK = 1,
HW_EXIT_IDLE_EN_SHIFT = 31,
SR_IDLE_MASK = 0x1ff,
SR_IDLE_SHIFT = 0,
/* PCTL_SCFG */
HW_LOW_POWER_EN = 1 << 0,
/* PCTL_POWCTL */
POWER_UP_START = 1 << 0,
/* PCTL_POWSTAT */
POWER_UP_DONE = 1 << 0,
/* PCTL_MCMD */
START_CMD = 1 << 31,
BANK_ADDR_MASK = 7,
BANK_ADDR_SHIFT = 17,
CMD_ADDR_MASK = 0x1fff,
CMD_ADDR_SHIFT = 4,
DESELECT_CMD = 0,
PREA_CMD,
REF_CMD,
MRS_CMD,
ZQCS_CMD,
ZQCL_CMD,
RSTL_CMD,
MRR_CMD = 8,
/* PCTL_STAT */
INIT_MEM = 0,
CONFIG,
CONFIG_REQ,
ACCESS,
ACCESS_REQ,
LOW_POWER,
LOW_POWER_ENTRY_REQ,
LOW_POWER_EXIT_REQ,
PCTL_STAT_MASK = 7,
/* PCTL_SCTL */
INIT_STATE = 0,
CFG_STATE = 1,
GO_STATE = 2,
SLEEP_STATE = 3,
WAKEUP_STATE = 4,
};
/* GRF_SOC_CON2 */
#define MSCH4_MAINDDR3 (1 << 7)
#define PHY_DRV_ODT_SET(n) ((n << 4) | n)
#define DDR3_DLL_RESET (1 << 8)
/* CK pull up/down driver strength control */
enum {
PHY_RON_DISABLE = 0,
PHY_RON_309OHM = 1,
PHY_RON_155OHM,
PHY_RON_103OHM = 3,
PHY_RON_63OHM = 5,
PHY_RON_45OHM = 7,
PHY_RON_77OHM,
PHY_RON_62OHM,
PHY_RON_52OHM,
PHY_RON_44OHM,
PHY_RON_39OHM,
PHY_RON_34OHM,
PHY_RON_31OHM,
PHY_RON_28OHM,
};
/* DQ pull up/down control */
enum {
PHY_RTT_DISABLE = 0,
PHY_RTT_861OHM = 1,
PHY_RTT_431OHM,
PHY_RTT_287OHM,
PHY_RTT_216OHM,
PHY_RTT_172OHM,
PHY_RTT_145OHM,
PHY_RTT_124OHM,
PHY_RTT_215OHM,
PHY_RTT_144OHM = 0xa,
PHY_RTT_123OHM,
PHY_RTT_108OHM,
PHY_RTT_96OHM,
PHY_RTT_86OHM,
PHY_RTT_78OHM,
};
/* DQS squelch DLL delay */
enum {
DQS_DLL_NO_DELAY = 0,
DQS_DLL_22P5_DELAY,
DQS_DLL_45_DELAY,
DQS_DLL_67P5_DELAY,
DQS_DLL_90_DELAY,
DQS_DLL_112P5_DELAY,
DQS_DLL_135_DELAY,
DQS_DLL_157P5_DELAY,
};
/* GRF_OS_REG1 */
enum {
/*
* 000: lpddr
* 001: ddr
* 010: ddr2
* 011: ddr3
* 100: lpddr2-s2
* 101: lpddr2-s4
* 110: lpddr3
*/
DDR_TYPE_MASK = 7,
DDR_TYPE_SHIFT = 13,
/* 0: 1 chn, 1: 2 chn */
DDR_CHN_CNT_SHIFT = 12,
/* 0: 1 rank, 1: 2 rank */
DDR_RANK_CNT_MASK = 1,
DDR_RANK_CNT_SHIFT = 11,
/*
* 00: 9col
* 01: 10col
* 10: 11col
* 11: 12col
*/
DDR_COL_MASK = 3,
DDR_COL_SHIFT = 9,
/* 0: 8 bank, 1: 4 bank*/
DDR_BANK_MASK = 1,
DDR_BANK_SHIFT = 8,
/*
* 00: 13 row
* 01: 14 row
* 10: 15 row
* 11: 16 row
*/
DDR_CS0_ROW_MASK = 3,
DDR_CS0_ROW_SHIFT = 6,
DDR_CS1_ROW_MASK = 3,
DDR_CS1_ROW_SHIFT = 4,
/*
* 00: 32 bit
* 01: 16 bit
* 10: 8 bit
* rk3036 only support 16bit
*/
DDR_BW_MASK = 3,
DDR_BW_SHIFT = 2,
DDR_DIE_BW_MASK = 3,
DDR_DIE_BW_SHIFT = 0,
};
static void rkdclk_init(struct rk3036_sdram_priv *priv)
{
struct rk3036_pll *pll = &priv->cru->pll[1];
/* pll enter slow-mode */
rk_clrsetreg(&priv->cru->cru_mode_con,
DPLL_MODE_MASK << DPLL_MODE_SHIFT,
DPLL_MODE_SLOW << DPLL_MODE_SHIFT);
/* use integer mode */
rk_clrreg(&pll->con1, 1 << PLL_DSMPD_SHIFT);
rk_clrsetreg(&pll->con0,
PLL_POSTDIV1_MASK << PLL_POSTDIV1_SHIFT | PLL_FBDIV_MASK,
(dpll_init_cfg.postdiv1 << PLL_POSTDIV1_SHIFT) |
dpll_init_cfg.fbdiv);
rk_clrsetreg(&pll->con1, PLL_POSTDIV2_MASK << PLL_POSTDIV2_SHIFT |
PLL_REFDIV_MASK << PLL_REFDIV_SHIFT,
(dpll_init_cfg.postdiv2 << PLL_POSTDIV2_SHIFT |
dpll_init_cfg.refdiv << PLL_REFDIV_SHIFT));
/* waiting for pll lock */
while (readl(&pll->con1) & (1 << PLL_LOCK_STATUS_SHIFT))
rockchip_udelay(1);
/* PLL enter normal-mode */
rk_clrsetreg(&priv->cru->cru_mode_con,
DPLL_MODE_MASK << DPLL_MODE_SHIFT,
DPLL_MODE_NORM << DPLL_MODE_SHIFT);
}
static void copy_to_reg(u32 *dest, const u32 *src, u32 n)
{
int i;
for (i = 0; i < n / sizeof(u32); i++) {
writel(*src, dest);
src++;
dest++;
}
}
void phy_pctrl_reset(struct rk3036_sdram_priv *priv)
{
struct rk3036_ddr_phy *ddr_phy = priv->phy;
rk_clrsetreg(&priv->cru->cru_softrst_con[5], 1 << DDRCTRL_PSRST_SHIFT |
1 << DDRCTRL_SRST_SHIFT | 1 << DDRPHY_PSRST_SHIFT |
1 << DDRPHY_SRST_SHIFT,
1 << DDRCTRL_PSRST_SHIFT | 1 << DDRCTRL_SRST_SHIFT |
1 << DDRPHY_PSRST_SHIFT | 1 << DDRPHY_SRST_SHIFT);
rockchip_udelay(10);
rk_clrreg(&priv->cru->cru_softrst_con[5], 1 << DDRPHY_PSRST_SHIFT |
1 << DDRPHY_SRST_SHIFT);
rockchip_udelay(10);
rk_clrreg(&priv->cru->cru_softrst_con[5], 1 << DDRCTRL_PSRST_SHIFT |
1 << DDRCTRL_SRST_SHIFT);
rockchip_udelay(10);
clrsetbits_le32(&ddr_phy->ddrphy_reg1,
SOFT_RESET_MASK << SOFT_RESET_SHIFT,
0 << SOFT_RESET_SHIFT);
rockchip_udelay(10);
clrsetbits_le32(&ddr_phy->ddrphy_reg1,
SOFT_RESET_MASK << SOFT_RESET_SHIFT,
3 << SOFT_RESET_SHIFT);
rockchip_udelay(1);
}
void phy_dll_bypass_set(struct rk3036_sdram_priv *priv, unsigned int freq)
{
struct rk3036_ddr_phy *ddr_phy = priv->phy;
if (freq < ddr_timing.freq) {
writel(CMD_DLL_BYPASS | HIGH_8BIT_DLL_BYPASS |
LOW_8BIT_DLL_BYPASS, &ddr_phy->ddrphy_reg2a);
writel(LEFT_CHN_TX_DQ_PHASE_BYPASS_90 |
LEFT_CHN_TX_DQ_DLL_ENABLE |
(0 & LEFT_CHN_TX_DQ_DLL_DELAY_MASK) <<
LEFT_CHN_TX_DQ_DLL_DELAY_SHIFT, &ddr_phy->ddrphy_reg6);
writel(RIGHT_CHN_TX_DQ_PHASE_BYPASS_90 |
RIGHT_CHN_TX_DQ_DLL_ENABLE |
(0 & RIGHT_CHN_TX_DQ_DLL_DELAY_MASK) <<
RIGHT_CHN_TX_DQ_DLL_DELAY_SHIFT,
&ddr_phy->ddrphy_reg9);
} else {
writel(CMD_DLL_BYPASS_DISABLE | HIGH_8BIT_DLL_BYPASS_DISABLE |
LOW_8BIT_DLL_BYPASS_DISABLE, &ddr_phy->ddrphy_reg2a);
writel(LEFT_CHN_TX_DQ_PHASE_BYPASS_0 |
LEFT_CHN_TX_DQ_DLL_ENABLE |
(4 & LEFT_CHN_TX_DQ_DLL_DELAY_MASK) <<
LEFT_CHN_TX_DQ_DLL_DELAY_SHIFT,
&ddr_phy->ddrphy_reg6);
writel(RIGHT_CHN_TX_DQ_PHASE_BYPASS_0 |
RIGHT_CHN_TX_DQ_DLL_ENABLE |
(4 & RIGHT_CHN_TX_DQ_DLL_DELAY_MASK) <<
RIGHT_CHN_TX_DQ_DLL_DELAY_SHIFT,
&ddr_phy->ddrphy_reg9);
}
writel(CMD_SLAVE_DLL_NO_INVERSE_MODE | CMD_SLAVE_DLL_ENALBE |
(0 & CMD_TX_SLAVE_DLL_DELAY_MASK) <<
CMD_TX_SLAVE_DLL_DELAY_SHIFT, &ddr_phy->ddrphy_reg19);
/* 45 degree delay */
writel((DQS_DLL_45_DELAY & LEFT_CHN_RX_DQS_DELAY_TAP_MASK) <<
LEFT_CHN_RX_DQS_DELAY_TAP_SHIFT, &ddr_phy->ddrphy_reg8);
writel((DQS_DLL_45_DELAY & RIGHT_CHN_RX_DQS_DELAY_TAP_MASK) <<
RIGHT_CHN_RX_DQS_DELAY_TAP_SHIFT, &ddr_phy->ddrphy_reg11);
}
static void send_command(struct rk3036_ddr_pctl *pctl,
u32 rank, u32 cmd, u32 arg)
{
writel((START_CMD | (rank << 20) | arg | cmd), &pctl->mcmd);
rockchip_udelay(1);
while (readl(&pctl->mcmd) & START_CMD)
;
}
static void memory_init(struct rk3036_sdram_priv *priv)
{
struct rk3036_ddr_pctl *pctl = priv->pctl;
send_command(pctl, 3, DESELECT_CMD, 0);
rockchip_udelay(1);
send_command(pctl, 3, PREA_CMD, 0);
send_command(pctl, 3, MRS_CMD,
(0x02 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
(ddr_timing.phy_timing.mr[2] & CMD_ADDR_MASK) <<
CMD_ADDR_SHIFT);
send_command(pctl, 3, MRS_CMD,
(0x03 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
(ddr_timing.phy_timing.mr[3] & CMD_ADDR_MASK) <<
CMD_ADDR_SHIFT);
send_command(pctl, 3, MRS_CMD,
(0x01 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
(ddr_timing.phy_timing.mr[1] & CMD_ADDR_MASK) <<
CMD_ADDR_SHIFT);
send_command(pctl, 3, MRS_CMD,
(0x00 & BANK_ADDR_MASK) << BANK_ADDR_SHIFT |
(ddr_timing.phy_timing.mr[0] & CMD_ADDR_MASK) <<
CMD_ADDR_SHIFT | DDR3_DLL_RESET);
send_command(pctl, 3, ZQCL_CMD, 0);
}
static void data_training(struct rk3036_sdram_priv *priv)
{
struct rk3036_ddr_phy *ddr_phy = priv->phy;
struct rk3036_ddr_pctl *pctl = priv->pctl;
u32 value;
/* disable auto refresh */
value = readl(&pctl->trefi),
writel(0, &pctl->trefi);
clrsetbits_le32(&ddr_phy->ddrphy_reg2, 0x03,
DQS_SQU_CAL_NORMAL_MODE | DQS_SQU_CAL_START);
rockchip_udelay(1);
while ((readl(&ddr_phy->ddrphy_reg62) & CAL_DONE_MASK) !=
(HIGH_8BIT_CAL_DONE | LOW_8BIT_CAL_DONE)) {
;
}
clrsetbits_le32(&ddr_phy->ddrphy_reg2, 0x03,
DQS_SQU_CAL_NORMAL_MODE | DQS_SQU_NO_CAL);
/*
* since data training will take about 20us, so send some auto
* refresh(about 7.8us) to complement the lost time
*/
send_command(pctl, 3, REF_CMD, 0);
send_command(pctl, 3, REF_CMD, 0);
send_command(pctl, 3, REF_CMD, 0);
writel(value, &pctl->trefi);
}
static void move_to_config_state(struct rk3036_sdram_priv *priv)
{
unsigned int state;
struct rk3036_ddr_pctl *pctl = priv->pctl;
while (1) {
state = readl(&pctl->stat) & PCTL_STAT_MASK;
switch (state) {
case LOW_POWER:
writel(WAKEUP_STATE, &pctl->sctl);
while ((readl(&pctl->stat) & PCTL_STAT_MASK)
!= ACCESS)
;
/*
* If at low power state, need wakeup first, and then
* enter the config, so fallthrough
*/
case ACCESS:
/* fallthrough */
case INIT_MEM:
writel(CFG_STATE, &pctl->sctl);
while ((readl(&pctl->stat) & PCTL_STAT_MASK) != CONFIG)
;
break;
case CONFIG:
return;
default:
break;
}
}
}
static void move_to_access_state(struct rk3036_sdram_priv *priv)
{
unsigned int state;
struct rk3036_ddr_pctl *pctl = priv->pctl;
while (1) {
state = readl(&pctl->stat) & PCTL_STAT_MASK;
switch (state) {
case LOW_POWER:
writel(WAKEUP_STATE, &pctl->sctl);
while ((readl(&pctl->stat) & PCTL_STAT_MASK) != ACCESS)
;
break;
case INIT_MEM:
writel(CFG_STATE, &pctl->sctl);
while ((readl(&pctl->stat) & PCTL_STAT_MASK) != CONFIG)
;
/* fallthrough */
case CONFIG:
writel(GO_STATE, &pctl->sctl);
while ((readl(&pctl->stat) & PCTL_STAT_MASK) != ACCESS)
;
break;
case ACCESS:
return;
default:
break;
}
}
}
static void pctl_cfg(struct rk3036_sdram_priv *priv)
{
struct rk3036_ddr_pctl *pctl = priv->pctl;
u32 burst_len;
u32 reg;
writel(DFI_INIT_START | DFI_DATA_BYTE_DISABLE_EN, &pctl->dfistcfg0);
writel(DFI_DRAM_CLK_SR_EN | DFI_DRAM_CLK_DPD_EN, &pctl->dfistcfg1);
writel(DFI_PARITY_INTR_EN | DFI_PARITY_EN, &pctl->dfistcfg2);
writel(7 << TLP_RESP_TIME_SHIFT | LP_SR_EN | LP_PD_EN,
&pctl->dfilpcfg0);
writel(1, &pctl->dfitphyupdtype0);
writel(0x0d, &pctl->dfitphyrdlat);
/* cs0 and cs1 write odt enable */
writel((RANK0_ODT_WRITE_SEL | RANK1_ODT_WRITE_SEL),
&pctl->dfiodtcfg);
/* odt write length */
writel(7 << ODT_LEN_BL8_W_SHIFT, &pctl->dfiodtcfg1);
/* phyupd and ctrlupd disabled */
writel(0, &pctl->dfiupdcfg);
if ((ddr_timing.noc_timing.burstlen << 1) == 4)
burst_len = MEM_BL4;
else
burst_len = MEM_BL8;
copy_to_reg(&pctl->togcnt1u, &ddr_timing.pctl_timing.togcnt1u,
sizeof(struct rk3036_pctl_timing));
reg = readl(&pctl->tcl);
writel(reg - 3, &pctl->dfitrddataen);
reg = readl(&pctl->tcwl);
writel(reg - 1, &pctl->dfitphywrlat);
writel(burst_len | (1 & TFAW_CFG_MASK) << TFAW_CFG_SHIFT |
PD_EXIT_SLOW_MODE | PD_ACTIVE_POWER_DOWN |
(0 & PD_IDLE_MASK) << PD_IDLE_SHIFT,
&pctl->mcfg);
writel(RK_SETBITS(MSCH4_MAINDDR3), &priv->grf->soc_con2);
setbits_le32(&pctl->scfg, HW_LOW_POWER_EN);
}
static void phy_cfg(struct rk3036_sdram_priv *priv)
{
struct rk3036_ddr_phy *ddr_phy = priv->phy;
struct rk3036_service_sys *axi_bus = priv->axi_bus;
writel(ddr_timing.noc_timing.noc_timing, &axi_bus->ddrtiming);
writel(0x3f, &axi_bus->readlatency);
writel(MEMORY_SELECT_DDR3 | DQS_SQU_CAL_NORMAL_MODE,
&ddr_phy->ddrphy_reg2);
clrsetbits_le32(&ddr_phy->ddrphy_reg3, 1, ddr_timing.phy_timing.bl);
writel(ddr_timing.phy_timing.cl_al, &ddr_phy->ddrphy_reg4a);
writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg16);
writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg22);
writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg25);
writel(PHY_DRV_ODT_SET(PHY_RON_44OHM), &ddr_phy->ddrphy_reg26);
writel(PHY_DRV_ODT_SET(PHY_RTT_216OHM), &ddr_phy->ddrphy_reg27);
writel(PHY_DRV_ODT_SET(PHY_RTT_216OHM), &ddr_phy->ddrphy_reg28);
}
void dram_cfg_rbc(struct rk3036_sdram_priv *priv)
{
char noc_config;
int i = 0;
struct rk3036_ddr_config config = priv->ddr_config;
struct rk3036_service_sys *axi_bus = priv->axi_bus;
move_to_config_state(priv);
/* 2bit in BIT1, 2 */
if (config.rank == 2) {
noc_config = (config.cs0_row - 13) << 4 | config.bank << 1 |
1 << 3 | (config.col - 10);
if (noc_config == ddr_cfg_2_rbc[9]) {
i = 9;
goto finish;
} else if (noc_config == ddr_cfg_2_rbc[10]) {
i = 10;
goto finish;
}
}
noc_config = (config.cs0_row - 13) << 4 | config.bank << 1 |
(config.col - 10);
for (i = 0; i < sizeof(ddr_cfg_2_rbc); i++) {
if (noc_config == ddr_cfg_2_rbc[i])
goto finish;
}
/* bank: 1 bit in BIT6,7, 1bit in BIT1, 2 */
noc_config = 1 << 6 | (config.cs0_row - 13) << 4 |
2 << 1 | (config.col - 10);
if (noc_config == ddr_cfg_2_rbc[11]) {
i = 11;
goto finish;
}
/* bank: 2bit in BIT6,7 */
noc_config = (config.bank << 6) | (config.cs0_row - 13) << 4 |
(config.col - 10);
if (noc_config == ddr_cfg_2_rbc[0])
i = 0;
else if (noc_config == ddr_cfg_2_rbc[12])
i = 12;
else if (noc_config == ddr_cfg_2_rbc[13])
i = 13;
finish:
writel(i, &axi_bus->ddrconf);
move_to_access_state(priv);
}
static void sdram_all_config(struct rk3036_sdram_priv *priv)
{
u32 os_reg = 0;
u32 cs1_row = 0;
struct rk3036_ddr_config config = priv->ddr_config;
if (config.rank > 1)
cs1_row = config.cs1_row - 13;
os_reg = config.ddr_type << DDR_TYPE_SHIFT |
0 << DDR_CHN_CNT_SHIFT |
(config.rank - 1) << DDR_RANK_CNT_SHIFT |
(config.col - 9) << DDR_COL_SHIFT |
(config.bank == 3 ? 0 : 1) << DDR_BANK_SHIFT |
(config.cs0_row - 13) << DDR_CS0_ROW_SHIFT |
cs1_row << DDR_CS1_ROW_SHIFT |
1 << DDR_BW_SHIFT |
(2 >> config.bw) << DDR_DIE_BW_SHIFT;
writel(os_reg, &priv->grf->os_reg[1]);
}
size_t sdram_size(void)
{
u32 size, os_reg, cs0_row, cs1_row, col, bank, rank;
struct rk3036_grf *grf = (void *)GRF_BASE;
os_reg = readl(&grf->os_reg[1]);
cs0_row = 13 + ((os_reg >> DDR_CS0_ROW_SHIFT) & DDR_CS0_ROW_MASK);
cs1_row = 13 + ((os_reg >> DDR_CS1_ROW_SHIFT) & DDR_CS1_ROW_MASK);
col = 9 + ((os_reg >> DDR_COL_SHIFT) & DDR_COL_MASK);
bank = 3 - ((os_reg >> DDR_BANK_SHIFT) & DDR_BANK_MASK);
rank = 1 + ((os_reg >> DDR_RANK_CNT_SHIFT) & DDR_RANK_CNT_MASK);
/* row + col + bank + bw(rk3036 only support 16bit, so fix in 1) */
size = 1 << (cs0_row + col + bank + 1);
if (rank > 1)
size += size >> (cs0_row - cs1_row);
return size;
}
void sdram_init(void)
{
struct rk3036_sdram_priv sdram_priv;
sdram_priv.cru = (void *)CRU_BASE;
sdram_priv.grf = (void *)GRF_BASE;
sdram_priv.phy = (void *)DDR_PHY_BASE;
sdram_priv.pctl = (void *)DDR_PCTL_BASE;
sdram_priv.axi_bus = (void *)CPU_AXI_BUS_BASE;
get_ddr_config(&sdram_priv.ddr_config);
sdram_all_config(&sdram_priv);
rkdclk_init(&sdram_priv);
phy_pctrl_reset(&sdram_priv);
phy_dll_bypass_set(&sdram_priv, ddr_timing.freq);
pctl_cfg(&sdram_priv);
phy_cfg(&sdram_priv);
writel(POWER_UP_START, &sdram_priv.pctl->powctl);
while (!(readl(&sdram_priv.pctl->powstat) & POWER_UP_DONE))
;
memory_init(&sdram_priv);
move_to_config_state(&sdram_priv);
data_training(&sdram_priv);
move_to_access_state(&sdram_priv);
dram_cfg_rbc(&sdram_priv);
}