u-boot/board/RPXClassic/RPXClassic.c
Wolfgang Denk 3765b3e7bd Coding Style cleanup: remove trailing white space
Signed-off-by: Wolfgang Denk <wd@denx.de>
2013-10-14 16:06:53 -04:00

260 lines
6 KiB
C

/*
* (C) Copyright 2001
* Stäubli Faverges - <www.staubli.com>
* Pierre AUBERT p.aubert@staubli.com
* U-Boot port on RPXClassic LF (CLLF_BW31) board
*
* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <i2c.h>
#include <config.h>
#include <mpc8xx.h>
#include <net.h>
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
static unsigned char aschex_to_byte (unsigned char *cp);
/* ------------------------------------------------------------------------- */
#define _NOT_USED_ 0xFFFFCC25
const uint sdram_table[] =
{
/*
* Single Read. (Offset 00h in UPMA RAM)
*/
0xCFFFCC24, 0x0FFFCC04, 0X0CAFCC04, 0X03AFCC08,
0x3FBFCC27, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Read. (Offset 08h in UPMA RAM)
*/
0xCFFFCC24, 0x0FFFCC04, 0x0CAFCC84, 0x03AFCC88,
0x3FBFCC27, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Single Write. (Offset 18h in UPMA RAM)
*/
0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC04, 0x03FFCC00,
0x3FFFCC27, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Burst Write. (Offset 20h in UPMA RAM)
*/
0xCFFFCC24, 0x0FFFCC04, 0x0CFFCC80, 0x03FFCC8C,
0x0CFFCC00, 0x33FFCC27, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_,
/*
* Refresh. (Offset 30h in UPMA RAM)
*/
0xC0FFCC24, 0x03FFCC24, 0x0FFFCC24, 0x0FFFCC24,
0x3FFFCC27, /* last */
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_,
/*
* Exception. (Offset 3Ch in UPMA RAM)
*/
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*/
int checkboard (void)
{
puts ("Board: RPXClassic\n");
return (0);
}
/*-----------------------------------------------------------------------------
* board_get_enetaddr -- Read the MAC Address in the I2C EEPROM
*-----------------------------------------------------------------------------
*/
static void board_get_enetaddr(uchar *enet)
{
int i;
char buff[256], *cp;
/* Initialize I2C */
i2c_init (CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
/* Read 256 bytes in EEPROM */
i2c_read (0x54, 0, 1, (uchar *)buff, 128);
i2c_read (0x54, 128, 1, (uchar *)buff + 128, 128);
/* Retrieve MAC address in buffer (key EA) */
for (cp = buff;;) {
if (cp[0] == 'E' && cp[1] == 'A') {
cp += 3;
/* Read MAC address */
for (i = 0; i < 6; i++, cp += 2) {
enet[i] = aschex_to_byte ((unsigned char *)cp);
}
}
/* Scan to the end of the record */
while ((*cp != '\n') && (*cp != (char)0xff)) {
cp++;
}
/* If the next character is a \n, 0 or ff, we are done. */
cp++;
if ((*cp == '\n') || (*cp == 0) || (*cp == (char)0xff))
break;
}
#ifdef CONFIG_FEC_ENET
/* The MAC address is the same as normal ethernet except the 3rd byte */
/* (See the E.P. Planet Core Overview manual */
enet[3] |= 0x80;
#endif
printf("MAC address = %pM\n", enet);
}
int misc_init_r(void)
{
uchar enetaddr[6];
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
board_get_enetaddr(enetaddr);
eth_setenv_enetaddr("ethaddr", enetaddr);
}
return 0;
}
void rpxclassic_init (void)
{
/* Enable NVRAM */
*((uchar *) BCSR0) |= BCSR0_ENNVRAM;
#ifdef CONFIG_FEC_ENET
/* Validate the fast ethernet tranceiver */
*((volatile uchar *) BCSR2) &= ~BCSR2_MIICTL;
*((volatile uchar *) BCSR2) &= ~BCSR2_MIIPWRDWN;
*((volatile uchar *) BCSR2) |= BCSR2_MIIRST;
*((volatile uchar *) BCSR2) |= BCSR2_MIIPWRDWN;
#endif
}
/* ------------------------------------------------------------------------- */
phys_size_t initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size10;
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
/* Refresh clock prescalar */
memctl->memc_mptpr = CONFIG_SYS_MPTPR;
memctl->memc_mar = 0x00000000;
/* Map controller banks 1 to the SDRAM bank */
memctl->memc_or1 = CONFIG_SYS_OR1_PRELIM;
memctl->memc_br1 = CONFIG_SYS_BR1_PRELIM;
memctl->memc_mamr = CONFIG_SYS_MAMR_10COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
/* perform SDRAM initializsation sequence */
memctl->memc_mcr = 0x80002230; /* SDRAM bank 0 - refresh twice */
udelay (1);
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
udelay (1000);
/* Check Bank 0 Memory Size
* try 10 column mode
*/
size10 = dram_size (CONFIG_SYS_MAMR_10COL, SDRAM_BASE_PRELIM,
SDRAM_MAX_SIZE);
return (size10);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
{
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
return (get_ram_size(base, maxsize));
}
/*-----------------------------------------------------------------------------
* aschex_to_byte --
*-----------------------------------------------------------------------------
*/
static unsigned char aschex_to_byte (unsigned char *cp)
{
u_char byte, c;
c = *cp++;
if ((c >= 'A') && (c <= 'F')) {
c -= 'A';
c += 10;
} else if ((c >= 'a') && (c <= 'f')) {
c -= 'a';
c += 10;
} else {
c -= '0';
}
byte = c * 16;
c = *cp;
if ((c >= 'A') && (c <= 'F')) {
c -= 'A';
c += 10;
} else if ((c >= 'a') && (c <= 'f')) {
c -= 'a';
c += 10;
} else {
c -= '0';
}
byte += c;
return (byte);
}