mirror of
https://github.com/AsahiLinux/u-boot
synced 2025-01-21 09:34:25 +00:00
05dcb5be50
mxs_nand_command() implementation assume that it's working with a LP NAND, which is a common case nowadays and thus uses two bytes for column address. However this is wrong for NAND_CMD_READID and NAND_CMD_PARAM, which expects only one byte of column address, even for LP NANDs. This leads to ONFI detection problem with some NAND manufacturer (like Winbond) but not with others (like Samsung and Spansion) We fix this with a simple workaround to avoid the 2nd byte column address for those two commands. Also align the code with nand_base to support 16 bit devices. Tested on an iMX6SX device with: * Winbond W29N04GVSIAA * Spansion S34ML04G100TF100 * Samsung K9F4G08U00 Tested on imx8mn device with: * Windbond W29N04GV Signed-off-by: Andrea Scian <andrea.scian@dave.eu> CC: Stefano Babic <sbabic@denx.de> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@denx.de> |
||
|---|---|---|
| .. | ||
| raw | ||
| spi | ||
| bbt.c | ||
| core.c | ||
| Kconfig | ||
| Makefile | ||