mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-11 05:42:58 +00:00
a847fff11c
Leave the OCOTP turned on, so that we subsequent access do not fail. After enabling the thermal driver on a mx6sxsabresd board: U-Boot 2015.01-rc1-18267-g99d4189-dirty (Nov 24 2014 - 12:59:01) CPU: Freescale i.MX6SX rev1.0 at 792 MHz CPU: Temperature 48 C Reset cause: POR Board: MX6SX SABRE SDB I2C: ready DRAM: 1 GiB PMIC: PFUZE100 ID=0x10 MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2 00:01.0 - 16c3:abcd - Bridge device 01:00.0 - 8086:08b1 - Network controller In: serial Out: serial Err: serial Net: (hang) As the thermal driver accesses the ocotp registers, its clock will be disabled afterwards. Then when the MAC address is read (also from ocotp registers) it will cause a hang. Do not disable the ocotp clock to prevent this problem. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Reviewed-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
198 lines
4.7 KiB
C
198 lines
4.7 KiB
C
/*
|
|
* (C) Copyright 2013 ADVANSEE
|
|
* Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
|
|
*
|
|
* Based on Dirk Behme's
|
|
* https://github.com/dirkbehme/u-boot-imx6/blob/28b17e9/drivers/misc/imx_otp.c,
|
|
* which is based on Freescale's
|
|
* http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/drivers/misc/imx_otp.c?h=imx_v2009.08_1.1.0&id=9aa74e6,
|
|
* which is:
|
|
* Copyright (C) 2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <fuse.h>
|
|
#include <asm/errno.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/imx-regs.h>
|
|
|
|
#define BO_CTRL_WR_UNLOCK 16
|
|
#define BM_CTRL_WR_UNLOCK 0xffff0000
|
|
#define BV_CTRL_WR_UNLOCK_KEY 0x3e77
|
|
#define BM_CTRL_ERROR 0x00000200
|
|
#define BM_CTRL_BUSY 0x00000100
|
|
#define BO_CTRL_ADDR 0
|
|
#define BM_CTRL_ADDR 0x0000007f
|
|
|
|
#define BO_TIMING_STROBE_READ 16
|
|
#define BM_TIMING_STROBE_READ 0x003f0000
|
|
#define BV_TIMING_STROBE_READ_NS 37
|
|
#define BO_TIMING_RELAX 12
|
|
#define BM_TIMING_RELAX 0x0000f000
|
|
#define BV_TIMING_RELAX_NS 17
|
|
#define BO_TIMING_STROBE_PROG 0
|
|
#define BM_TIMING_STROBE_PROG 0x00000fff
|
|
#define BV_TIMING_STROBE_PROG_US 10
|
|
|
|
#define BM_READ_CTRL_READ_FUSE 0x00000001
|
|
|
|
#define BF(value, field) (((value) << BO_##field) & BM_##field)
|
|
|
|
#define WRITE_POSTAMBLE_US 2
|
|
|
|
static void wait_busy(struct ocotp_regs *regs, unsigned int delay_us)
|
|
{
|
|
while (readl(®s->ctrl) & BM_CTRL_BUSY)
|
|
udelay(delay_us);
|
|
}
|
|
|
|
static void clear_error(struct ocotp_regs *regs)
|
|
{
|
|
writel(BM_CTRL_ERROR, ®s->ctrl_clr);
|
|
}
|
|
|
|
static int prepare_access(struct ocotp_regs **regs, u32 bank, u32 word,
|
|
int assert, const char *caller)
|
|
{
|
|
*regs = (struct ocotp_regs *)OCOTP_BASE_ADDR;
|
|
|
|
if (bank >= ARRAY_SIZE((*regs)->bank) ||
|
|
word >= ARRAY_SIZE((*regs)->bank[0].fuse_regs) >> 2 ||
|
|
!assert) {
|
|
printf("mxc_ocotp %s(): Invalid argument\n", caller);
|
|
return -EINVAL;
|
|
}
|
|
|
|
enable_ocotp_clk(1);
|
|
|
|
wait_busy(*regs, 1);
|
|
clear_error(*regs);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int finish_access(struct ocotp_regs *regs, const char *caller)
|
|
{
|
|
u32 err;
|
|
|
|
err = !!(readl(®s->ctrl) & BM_CTRL_ERROR);
|
|
clear_error(regs);
|
|
|
|
if (err) {
|
|
printf("mxc_ocotp %s(): Access protect error\n", caller);
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int prepare_read(struct ocotp_regs **regs, u32 bank, u32 word, u32 *val,
|
|
const char *caller)
|
|
{
|
|
return prepare_access(regs, bank, word, val != NULL, caller);
|
|
}
|
|
|
|
int fuse_read(u32 bank, u32 word, u32 *val)
|
|
{
|
|
struct ocotp_regs *regs;
|
|
int ret;
|
|
|
|
ret = prepare_read(®s, bank, word, val, __func__);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = readl(®s->bank[bank].fuse_regs[word << 2]);
|
|
|
|
return finish_access(regs, __func__);
|
|
}
|
|
|
|
static void set_timing(struct ocotp_regs *regs)
|
|
{
|
|
u32 ipg_clk;
|
|
u32 relax, strobe_read, strobe_prog;
|
|
u32 timing;
|
|
|
|
ipg_clk = mxc_get_clock(MXC_IPG_CLK);
|
|
|
|
relax = DIV_ROUND_UP(ipg_clk * BV_TIMING_RELAX_NS, 1000000000) - 1;
|
|
strobe_read = DIV_ROUND_UP(ipg_clk * BV_TIMING_STROBE_READ_NS,
|
|
1000000000) + 2 * (relax + 1) - 1;
|
|
strobe_prog = DIV_ROUND_CLOSEST(ipg_clk * BV_TIMING_STROBE_PROG_US,
|
|
1000000) + 2 * (relax + 1) - 1;
|
|
|
|
timing = BF(strobe_read, TIMING_STROBE_READ) |
|
|
BF(relax, TIMING_RELAX) |
|
|
BF(strobe_prog, TIMING_STROBE_PROG);
|
|
|
|
clrsetbits_le32(®s->timing, BM_TIMING_STROBE_READ | BM_TIMING_RELAX |
|
|
BM_TIMING_STROBE_PROG, timing);
|
|
}
|
|
|
|
static void setup_direct_access(struct ocotp_regs *regs, u32 bank, u32 word,
|
|
int write)
|
|
{
|
|
u32 wr_unlock = write ? BV_CTRL_WR_UNLOCK_KEY : 0;
|
|
u32 addr = bank << 3 | word;
|
|
|
|
set_timing(regs);
|
|
clrsetbits_le32(®s->ctrl, BM_CTRL_WR_UNLOCK | BM_CTRL_ADDR,
|
|
BF(wr_unlock, CTRL_WR_UNLOCK) |
|
|
BF(addr, CTRL_ADDR));
|
|
}
|
|
|
|
int fuse_sense(u32 bank, u32 word, u32 *val)
|
|
{
|
|
struct ocotp_regs *regs;
|
|
int ret;
|
|
|
|
ret = prepare_read(®s, bank, word, val, __func__);
|
|
if (ret)
|
|
return ret;
|
|
|
|
setup_direct_access(regs, bank, word, false);
|
|
writel(BM_READ_CTRL_READ_FUSE, ®s->read_ctrl);
|
|
wait_busy(regs, 1);
|
|
*val = readl(®s->read_fuse_data);
|
|
|
|
return finish_access(regs, __func__);
|
|
}
|
|
|
|
static int prepare_write(struct ocotp_regs **regs, u32 bank, u32 word,
|
|
const char *caller)
|
|
{
|
|
return prepare_access(regs, bank, word, true, caller);
|
|
}
|
|
|
|
int fuse_prog(u32 bank, u32 word, u32 val)
|
|
{
|
|
struct ocotp_regs *regs;
|
|
int ret;
|
|
|
|
ret = prepare_write(®s, bank, word, __func__);
|
|
if (ret)
|
|
return ret;
|
|
|
|
setup_direct_access(regs, bank, word, true);
|
|
writel(val, ®s->data);
|
|
wait_busy(regs, BV_TIMING_STROBE_PROG_US);
|
|
udelay(WRITE_POSTAMBLE_US);
|
|
|
|
return finish_access(regs, __func__);
|
|
}
|
|
|
|
int fuse_override(u32 bank, u32 word, u32 val)
|
|
{
|
|
struct ocotp_regs *regs;
|
|
int ret;
|
|
|
|
ret = prepare_write(®s, bank, word, __func__);
|
|
if (ret)
|
|
return ret;
|
|
|
|
writel(val, ®s->bank[bank].fuse_regs[word << 2]);
|
|
|
|
return finish_access(regs, __func__);
|
|
}
|