Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-13 14:53:06 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/drivers/ddr/altera/sequencer.c
Marek Vasut 7ac40d25cf ddr: altera: Fix debug message format in sequencer 
The debug messages missed proper newlines and/or spaces in them.
Fix the formatting.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Tom Rini <trini@konsulko.com>
2015-08-08 14:14:06 +02:00

4051 lines
120 KiB
C
Raw Blame History

/*
* Copyright Altera Corporation (C) 2012-2015
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <common.h>
#include <asm/io.h>
#include <asm/arch/sdram.h>
#include "sequencer.h"
#include "sequencer_auto.h"
#include "sequencer_auto_ac_init.h"
#include "sequencer_auto_inst_init.h"
#include "sequencer_defines.h"
static void scc_mgr_load_dqs_for_write_group(uint32_t write_group);
static struct socfpga_sdr_rw_load_manager *sdr_rw_load_mgr_regs =
(struct socfpga_sdr_rw_load_manager *)(BASE_RW_MGR + 0x800);
static struct socfpga_sdr_rw_load_jump_manager *sdr_rw_load_jump_mgr_regs =
(struct socfpga_sdr_rw_load_jump_manager *)(BASE_RW_MGR + 0xC00);
static struct socfpga_sdr_reg_file *sdr_reg_file =
(struct socfpga_sdr_reg_file *)(BASE_REG_FILE);
static struct socfpga_sdr_scc_mgr *sdr_scc_mgr =
(struct socfpga_sdr_scc_mgr *)(BASE_SCC_MGR + 0x0E00);
static struct socfpga_phy_mgr_cmd *phy_mgr_cmd =
(struct socfpga_phy_mgr_cmd *)(BASE_PHY_MGR);
static struct socfpga_phy_mgr_cfg *phy_mgr_cfg =
(struct socfpga_phy_mgr_cfg *)(BASE_PHY_MGR + 0x4000);
static struct socfpga_data_mgr *data_mgr =
(struct socfpga_data_mgr *)(BASE_DATA_MGR);
#define DELTA_D 1
#define MGR_SELECT_MASK 0xf8000
/*
* In order to reduce ROM size, most of the selectable calibration steps are
* decided at compile time based on the user's calibration mode selection,
* as captured by the STATIC_CALIB_STEPS selection below.
*
* However, to support simulation-time selection of fast simulation mode, where
* we skip everything except the bare minimum, we need a few of the steps to
* be dynamic. In those cases, we either use the DYNAMIC_CALIB_STEPS for the
* check, which is based on the rtl-supplied value, or we dynamically compute
* the value to use based on the dynamically-chosen calibration mode
*/
#define DLEVEL 0
#define STATIC_IN_RTL_SIM 0
#define STATIC_SKIP_DELAY_LOOPS 0
#define STATIC_CALIB_STEPS (STATIC_IN_RTL_SIM | CALIB_SKIP_FULL_TEST | \
STATIC_SKIP_DELAY_LOOPS)
/* calibration steps requested by the rtl */
uint16_t dyn_calib_steps;
/*
* To make CALIB_SKIP_DELAY_LOOPS a dynamic conditional option
* instead of static, we use boolean logic to select between
* non-skip and skip values
*
* The mask is set to include all bits when not-skipping, but is
* zero when skipping
*/
uint16_t skip_delay_mask; /* mask off bits when skipping/not-skipping */
#define SKIP_DELAY_LOOP_VALUE_OR_ZERO(non_skip_value) \
((non_skip_value) & skip_delay_mask)
struct gbl_type *gbl;
struct param_type *param;
uint32_t curr_shadow_reg;
static uint32_t rw_mgr_mem_calibrate_write_test(uint32_t rank_bgn,
uint32_t write_group, uint32_t use_dm,
uint32_t all_correct, uint32_t *bit_chk, uint32_t all_ranks);
static u32 sdr_get_addr(u32 *base)
{
u32 addr = (u32)base & MGR_SELECT_MASK;
switch (addr) {
case BASE_PHY_MGR:
addr = (((u32)base >> 8) & (1 << 6)) | ((u32)base & 0x3f) |
SDR_PHYGRP_PHYMGRGRP_ADDRESS;
break;
case BASE_RW_MGR:
addr = ((u32)base & 0x1fff) | SDR_PHYGRP_RWMGRGRP_ADDRESS;
break;
case BASE_DATA_MGR:
addr = ((u32)base & 0x7ff) | SDR_PHYGRP_DATAMGRGRP_ADDRESS;
break;
case BASE_SCC_MGR:
addr = ((u32)base & 0xfff) | SDR_PHYGRP_SCCGRP_ADDRESS;
break;
case BASE_REG_FILE:
addr = ((u32)base & 0x7ff) | SDR_PHYGRP_REGFILEGRP_ADDRESS;
break;
case BASE_MMR:
addr = ((u32)base & 0xfff) | SDR_CTRLGRP_ADDRESS;
break;
default:
return -1;
}
return addr;
}
static void set_failing_group_stage(uint32_t group, uint32_t stage,
uint32_t substage)
{
/*
* Only set the global stage if there was not been any other
* failing group
*/
if (gbl->error_stage == CAL_STAGE_NIL) {
gbl->error_substage = substage;
gbl->error_stage = stage;
gbl->error_group = group;
}
}
static void reg_file_set_group(uint32_t set_group)
{
u32 addr = sdr_get_addr(&sdr_reg_file->cur_stage);
/* Read the current group and stage */
uint32_t cur_stage_group = readl(SOCFPGA_SDR_ADDRESS + addr);
/* Clear the group */
cur_stage_group &= 0x0000FFFF;
/* Set the group */
cur_stage_group |= (set_group << 16);
/* Write the data back */
writel(cur_stage_group, SOCFPGA_SDR_ADDRESS + addr);
}
static void reg_file_set_stage(uint32_t set_stage)
{
u32 addr = sdr_get_addr(&sdr_reg_file->cur_stage);
/* Read the current group and stage */
uint32_t cur_stage_group = readl(SOCFPGA_SDR_ADDRESS + addr);
/* Clear the stage and substage */
cur_stage_group &= 0xFFFF0000;
/* Set the stage */
cur_stage_group |= (set_stage & 0x000000FF);
/* Write the data back */
writel(cur_stage_group, SOCFPGA_SDR_ADDRESS + addr);
}
static void reg_file_set_sub_stage(uint32_t set_sub_stage)
{
u32 addr = sdr_get_addr(&sdr_reg_file->cur_stage);
/* Read the current group and stage */
uint32_t cur_stage_group = readl(SOCFPGA_SDR_ADDRESS + addr);
/* Clear the substage */
cur_stage_group &= 0xFFFF00FF;
/* Set the sub stage */
cur_stage_group |= ((set_sub_stage << 8) & 0x0000FF00);
/* Write the data back */
writel(cur_stage_group, SOCFPGA_SDR_ADDRESS + addr);
}
static void initialize(void)
{
u32 addr = sdr_get_addr(&phy_mgr_cfg->mux_sel);
debug("%s:%d\n", __func__, __LINE__);
/* USER calibration has control over path to memory */
/*
* In Hard PHY this is a 2-bit control:
* 0: AFI Mux Select
* 1: DDIO Mux Select
*/
writel(0x3, SOCFPGA_SDR_ADDRESS + addr);
/* USER memory clock is not stable we begin initialization */
addr = sdr_get_addr(&phy_mgr_cfg->reset_mem_stbl);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/* USER calibration status all set to zero */
addr = sdr_get_addr(&phy_mgr_cfg->cal_status);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&phy_mgr_cfg->cal_debug_info);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
if ((dyn_calib_steps & CALIB_SKIP_ALL) != CALIB_SKIP_ALL) {
param->read_correct_mask_vg = ((uint32_t)1 <<
(RW_MGR_MEM_DQ_PER_READ_DQS /
RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS)) - 1;
param->write_correct_mask_vg = ((uint32_t)1 <<
(RW_MGR_MEM_DQ_PER_READ_DQS /
RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS)) - 1;
param->read_correct_mask = ((uint32_t)1 <<
RW_MGR_MEM_DQ_PER_READ_DQS) - 1;
param->write_correct_mask = ((uint32_t)1 <<
RW_MGR_MEM_DQ_PER_WRITE_DQS) - 1;
param->dm_correct_mask = ((uint32_t)1 <<
(RW_MGR_MEM_DATA_WIDTH / RW_MGR_MEM_DATA_MASK_WIDTH))
- 1;
}
}
static void set_rank_and_odt_mask(uint32_t rank, uint32_t odt_mode)
{
uint32_t odt_mask_0 = 0;
uint32_t odt_mask_1 = 0;
uint32_t cs_and_odt_mask;
uint32_t addr;
if (odt_mode == RW_MGR_ODT_MODE_READ_WRITE) {
if (RW_MGR_MEM_NUMBER_OF_RANKS == 1) {
/*
* 1 Rank
* Read: ODT = 0
* Write: ODT = 1
*/
odt_mask_0 = 0x0;
odt_mask_1 = 0x1;
} else if (RW_MGR_MEM_NUMBER_OF_RANKS == 2) {
/* 2 Ranks */
if (RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM == 1) {
/* - Dual-Slot , Single-Rank
* (1 chip-select per DIMM)
* OR
* - RDIMM, 4 total CS (2 CS per DIMM)
* means 2 DIMM
* Since MEM_NUMBER_OF_RANKS is 2 they are
* both single rank
* with 2 CS each (special for RDIMM)
* Read: Turn on ODT on the opposite rank
* Write: Turn on ODT on all ranks
*/
odt_mask_0 = 0x3 & ~(1 << rank);
odt_mask_1 = 0x3;
} else {
/*
* USER - Single-Slot , Dual-rank DIMMs
* (2 chip-selects per DIMM)
* USER Read: Turn on ODT off on all ranks
* USER Write: Turn on ODT on active rank
*/
odt_mask_0 = 0x0;
odt_mask_1 = 0x3 & (1 << rank);
}
} else {
/* 4 Ranks
* Read:
* ----------+-----------------------+
* | |
* | ODT |
* Read From +-----------------------+
* Rank | 3 | 2 | 1 | 0 |
* ----------+-----+-----+-----+-----+
* 0 | 0 | 1 | 0 | 0 |
* 1 | 1 | 0 | 0 | 0 |
* 2 | 0 | 0 | 0 | 1 |
* 3 | 0 | 0 | 1 | 0 |
* ----------+-----+-----+-----+-----+
*
* Write:
* ----------+-----------------------+
* | |
* | ODT |
* Write To +-----------------------+
* Rank | 3 | 2 | 1 | 0 |
* ----------+-----+-----+-----+-----+
* 0 | 0 | 1 | 0 | 1 |
* 1 | 1 | 0 | 1 | 0 |
* 2 | 0 | 1 | 0 | 1 |
* 3 | 1 | 0 | 1 | 0 |
* ----------+-----+-----+-----+-----+
*/
switch (rank) {
case 0:
odt_mask_0 = 0x4;
odt_mask_1 = 0x5;
break;
case 1:
odt_mask_0 = 0x8;
odt_mask_1 = 0xA;
break;
case 2:
odt_mask_0 = 0x1;
odt_mask_1 = 0x5;
break;
case 3:
odt_mask_0 = 0x2;
odt_mask_1 = 0xA;
break;
}
}
} else {
odt_mask_0 = 0x0;
odt_mask_1 = 0x0;
}
cs_and_odt_mask =
(0xFF & ~(1 << rank)) |
((0xFF & odt_mask_0) << 8) |
((0xFF & odt_mask_1) << 16);
addr = sdr_get_addr((u32 *)RW_MGR_SET_CS_AND_ODT_MASK);
writel(cs_and_odt_mask, SOCFPGA_SDR_ADDRESS + addr);
}
static void scc_mgr_initialize(void)
{
u32 addr = sdr_get_addr((u32 *)SCC_MGR_HHP_RFILE);
/*
* Clear register file for HPS
* 16 (2^4) is the size of the full register file in the scc mgr:
* RFILE_DEPTH = log2(MEM_DQ_PER_DQS + 1 + MEM_DM_PER_DQS +
* MEM_IF_READ_DQS_WIDTH - 1) + 1;
*/
uint32_t i;
for (i = 0; i < 16; i++) {
debug_cond(DLEVEL == 1, "%s:%d: Clearing SCC RFILE index %u\n",
__func__, __LINE__, i);
writel(0, SOCFPGA_SDR_ADDRESS + addr + (i << 2));
}
}
static void scc_mgr_set_dqs_bus_in_delay(uint32_t read_group,
uint32_t delay)
{
u32 addr = sdr_get_addr((u32 *)SCC_MGR_DQS_IN_DELAY);
/* Load the setting in the SCC manager */
writel(delay, SOCFPGA_SDR_ADDRESS + addr + (read_group << 2));
}
static void scc_mgr_set_dqs_io_in_delay(uint32_t write_group,
uint32_t delay)
{
u32 addr = sdr_get_addr((u32 *)SCC_MGR_IO_IN_DELAY);
writel(delay, SOCFPGA_SDR_ADDRESS + addr + (RW_MGR_MEM_DQ_PER_WRITE_DQS << 2));
}
static void scc_mgr_set_dqs_en_phase(uint32_t read_group, uint32_t phase)
{
u32 addr = sdr_get_addr((u32 *)SCC_MGR_DQS_EN_PHASE);
/* Load the setting in the SCC manager */
writel(phase, SOCFPGA_SDR_ADDRESS + addr + (read_group << 2));
}
static void scc_mgr_set_dqs_en_phase_all_ranks(uint32_t read_group,
uint32_t phase)
{
uint32_t r;
uint32_t update_scan_chains;
uint32_t addr;
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
r += NUM_RANKS_PER_SHADOW_REG) {
/*
* USER although the h/w doesn't support different phases per
* shadow register, for simplicity our scc manager modeling
* keeps different phase settings per shadow reg, and it's
* important for us to keep them in sync to match h/w.
* for efficiency, the scan chain update should occur only
* once to sr0.
*/
update_scan_chains = (r == 0) ? 1 : 0;
scc_mgr_set_dqs_en_phase(read_group, phase);
if (update_scan_chains) {
addr = sdr_get_addr(&sdr_scc_mgr->dqs_ena);
writel(read_group, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
}
}
static void scc_mgr_set_dqdqs_output_phase(uint32_t write_group,
uint32_t phase)
{
u32 addr = sdr_get_addr((u32 *)SCC_MGR_DQDQS_OUT_PHASE);
/* Load the setting in the SCC manager */
writel(phase, SOCFPGA_SDR_ADDRESS + addr + (write_group << 2));
}
static void scc_mgr_set_dqdqs_output_phase_all_ranks(uint32_t write_group,
uint32_t phase)
{
uint32_t r;
uint32_t update_scan_chains;
uint32_t addr;
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
r += NUM_RANKS_PER_SHADOW_REG) {
/*
* USER although the h/w doesn't support different phases per
* shadow register, for simplicity our scc manager modeling
* keeps different phase settings per shadow reg, and it's
* important for us to keep them in sync to match h/w.
* for efficiency, the scan chain update should occur only
* once to sr0.
*/
update_scan_chains = (r == 0) ? 1 : 0;
scc_mgr_set_dqdqs_output_phase(write_group, phase);
if (update_scan_chains) {
addr = sdr_get_addr(&sdr_scc_mgr->dqs_ena);
writel(write_group, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
}
}
static void scc_mgr_set_dqs_en_delay(uint32_t read_group, uint32_t delay)
{
uint32_t addr = sdr_get_addr((u32 *)SCC_MGR_DQS_EN_DELAY);
/* Load the setting in the SCC manager */
writel(delay + IO_DQS_EN_DELAY_OFFSET, SOCFPGA_SDR_ADDRESS + addr +
(read_group << 2));
}
static void scc_mgr_set_dqs_en_delay_all_ranks(uint32_t read_group,
uint32_t delay)
{
uint32_t r;
uint32_t addr;
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
r += NUM_RANKS_PER_SHADOW_REG) {
scc_mgr_set_dqs_en_delay(read_group, delay);
addr = sdr_get_addr(&sdr_scc_mgr->dqs_ena);
writel(read_group, SOCFPGA_SDR_ADDRESS + addr);
/*
* In shadow register mode, the T11 settings are stored in
* registers in the core, which are updated by the DQS_ENA
* signals. Not issuing the SCC_MGR_UPD command allows us to
* save lots of rank switching overhead, by calling
* select_shadow_regs_for_update with update_scan_chains
* set to 0.
*/
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
/*
* In shadow register mode, the T11 settings are stored in
* registers in the core, which are updated by the DQS_ENA
* signals. Not issuing the SCC_MGR_UPD command allows us to
* save lots of rank switching overhead, by calling
* select_shadow_regs_for_update with update_scan_chains
* set to 0.
*/
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
static void scc_mgr_set_oct_out1_delay(uint32_t write_group, uint32_t delay)
{
uint32_t read_group;
uint32_t addr = sdr_get_addr((u32 *)SCC_MGR_OCT_OUT1_DELAY);
/*
* Load the setting in the SCC manager
* Although OCT affects only write data, the OCT delay is controlled
* by the DQS logic block which is instantiated once per read group.
* For protocols where a write group consists of multiple read groups,
* the setting must be set multiple times.
*/
for (read_group = write_group * RW_MGR_MEM_IF_READ_DQS_WIDTH /
RW_MGR_MEM_IF_WRITE_DQS_WIDTH;
read_group < (write_group + 1) * RW_MGR_MEM_IF_READ_DQS_WIDTH /
RW_MGR_MEM_IF_WRITE_DQS_WIDTH; ++read_group)
writel(delay, SOCFPGA_SDR_ADDRESS + addr + (read_group << 2));
}
static void scc_mgr_set_dq_out1_delay(uint32_t write_group,
uint32_t dq_in_group, uint32_t delay)
{
uint32_t addr = sdr_get_addr((u32 *)SCC_MGR_IO_OUT1_DELAY);
/* Load the setting in the SCC manager */
writel(delay, SOCFPGA_SDR_ADDRESS + addr + (dq_in_group << 2));
}
static void scc_mgr_set_dq_in_delay(uint32_t write_group,
uint32_t dq_in_group, uint32_t delay)
{
uint32_t addr = sdr_get_addr((u32 *)SCC_MGR_IO_IN_DELAY);
/* Load the setting in the SCC manager */
writel(delay, SOCFPGA_SDR_ADDRESS + addr + (dq_in_group << 2));
}
static void scc_mgr_set_hhp_extras(void)
{
/*
* Load the fixed setting in the SCC manager
* bits: 0:0 = 1'b1 - dqs bypass
* bits: 1:1 = 1'b1 - dq bypass
* bits: 4:2 = 3'b001 - rfifo_mode
* bits: 6:5 = 2'b01 - rfifo clock_select
* bits: 7:7 = 1'b0 - separate gating from ungating setting
* bits: 8:8 = 1'b0 - separate OE from Output delay setting
*/
uint32_t value = (0<<8) | (0<<7) | (1<<5) | (1<<2) | (1<<1) | (1<<0);
uint32_t addr = sdr_get_addr((u32 *)SCC_MGR_HHP_GLOBALS);
writel(value, SOCFPGA_SDR_ADDRESS + addr + SCC_MGR_HHP_EXTRAS_OFFSET);
}
static void scc_mgr_set_dqs_out1_delay(uint32_t write_group,
uint32_t delay)
{
uint32_t addr = sdr_get_addr((u32 *)SCC_MGR_IO_OUT1_DELAY);
/* Load the setting in the SCC manager */
writel(delay, SOCFPGA_SDR_ADDRESS + addr + (RW_MGR_MEM_DQ_PER_WRITE_DQS << 2));
}
static void scc_mgr_set_dm_out1_delay(uint32_t write_group,
uint32_t dm, uint32_t delay)
{
uint32_t addr = sdr_get_addr((u32 *)SCC_MGR_IO_OUT1_DELAY);
/* Load the setting in the SCC manager */
writel(delay, SOCFPGA_SDR_ADDRESS + addr +
((RW_MGR_MEM_DQ_PER_WRITE_DQS + 1 + dm) << 2));
}
/*
* USER Zero all DQS config
* TODO: maybe rename to scc_mgr_zero_dqs_config (or something)
*/
static void scc_mgr_zero_all(void)
{
uint32_t i, r;
uint32_t addr;
/*
* USER Zero all DQS config settings, across all groups and all
* shadow registers
*/
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS; r +=
NUM_RANKS_PER_SHADOW_REG) {
for (i = 0; i < RW_MGR_MEM_IF_READ_DQS_WIDTH; i++) {
/*
* The phases actually don't exist on a per-rank basis,
* but there's no harm updating them several times, so
* let's keep the code simple.
*/
scc_mgr_set_dqs_bus_in_delay(i, IO_DQS_IN_RESERVE);
scc_mgr_set_dqs_en_phase(i, 0);
scc_mgr_set_dqs_en_delay(i, 0);
}
for (i = 0; i < RW_MGR_MEM_IF_WRITE_DQS_WIDTH; i++) {
scc_mgr_set_dqdqs_output_phase(i, 0);
/* av/cv don't have out2 */
scc_mgr_set_oct_out1_delay(i, IO_DQS_OUT_RESERVE);
}
}
/* multicast to all DQS group enables */
addr = sdr_get_addr(&sdr_scc_mgr->dqs_ena);
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
static void scc_set_bypass_mode(uint32_t write_group, uint32_t mode)
{
uint32_t addr;
/* mode = 0 : Do NOT bypass - Half Rate Mode */
/* mode = 1 : Bypass - Full Rate Mode */
/* only need to set once for all groups, pins, dq, dqs, dm */
if (write_group == 0) {
debug_cond(DLEVEL == 1, "%s:%d Setting HHP Extras\n", __func__,
__LINE__);
scc_mgr_set_hhp_extras();
debug_cond(DLEVEL == 1, "%s:%d Done Setting HHP Extras\n",
__func__, __LINE__);
}
/* multicast to all DQ enables */
addr = sdr_get_addr(&sdr_scc_mgr->dq_ena);
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_scc_mgr->dm_ena);
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
/* update current DQS IO enable */
addr = sdr_get_addr(&sdr_scc_mgr->dqs_io_ena);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/* update the DQS logic */
addr = sdr_get_addr(&sdr_scc_mgr->dqs_ena);
writel(write_group, SOCFPGA_SDR_ADDRESS + addr);
/* hit update */
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
static void scc_mgr_zero_group(uint32_t write_group, uint32_t test_begin,
int32_t out_only)
{
uint32_t i, r;
uint32_t addr;
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS; r +=
NUM_RANKS_PER_SHADOW_REG) {
/* Zero all DQ config settings */
for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
scc_mgr_set_dq_out1_delay(write_group, i, 0);
if (!out_only)
scc_mgr_set_dq_in_delay(write_group, i, 0);
}
/* multicast to all DQ enables */
addr = sdr_get_addr(&sdr_scc_mgr->dq_ena);
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
/* Zero all DM config settings */
for (i = 0; i < RW_MGR_NUM_DM_PER_WRITE_GROUP; i++) {
scc_mgr_set_dm_out1_delay(write_group, i, 0);
}
/* multicast to all DM enables */
addr = sdr_get_addr(&sdr_scc_mgr->dm_ena);
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
/* zero all DQS io settings */
if (!out_only)
scc_mgr_set_dqs_io_in_delay(write_group, 0);
/* av/cv don't have out2 */
scc_mgr_set_dqs_out1_delay(write_group, IO_DQS_OUT_RESERVE);
scc_mgr_set_oct_out1_delay(write_group, IO_DQS_OUT_RESERVE);
scc_mgr_load_dqs_for_write_group(write_group);
/* multicast to all DQS IO enables (only 1) */
addr = sdr_get_addr(&sdr_scc_mgr->dqs_io_ena);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/* hit update to zero everything */
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
}
/* load up dqs config settings */
static void scc_mgr_load_dqs(uint32_t dqs)
{
uint32_t addr = sdr_get_addr(&sdr_scc_mgr->dqs_ena);
writel(dqs, SOCFPGA_SDR_ADDRESS + addr);
}
static void scc_mgr_load_dqs_for_write_group(uint32_t write_group)
{
uint32_t read_group;
uint32_t addr = sdr_get_addr(&sdr_scc_mgr->dqs_ena);
/*
* Although OCT affects only write data, the OCT delay is controlled
* by the DQS logic block which is instantiated once per read group.
* For protocols where a write group consists of multiple read groups,
* the setting must be scanned multiple times.
*/
for (read_group = write_group * RW_MGR_MEM_IF_READ_DQS_WIDTH /
RW_MGR_MEM_IF_WRITE_DQS_WIDTH;
read_group < (write_group + 1) * RW_MGR_MEM_IF_READ_DQS_WIDTH /
RW_MGR_MEM_IF_WRITE_DQS_WIDTH; ++read_group)
writel(read_group, SOCFPGA_SDR_ADDRESS + addr);
}
/* load up dqs io config settings */
static void scc_mgr_load_dqs_io(void)
{
uint32_t addr = sdr_get_addr(&sdr_scc_mgr->dqs_io_ena);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
/* load up dq config settings */
static void scc_mgr_load_dq(uint32_t dq_in_group)
{
uint32_t addr = sdr_get_addr(&sdr_scc_mgr->dq_ena);
writel(dq_in_group, SOCFPGA_SDR_ADDRESS + addr);
}
/* load up dm config settings */
static void scc_mgr_load_dm(uint32_t dm)
{
uint32_t addr = sdr_get_addr(&sdr_scc_mgr->dm_ena);
writel(dm, SOCFPGA_SDR_ADDRESS + addr);
}
/*
* apply and load a particular input delay for the DQ pins in a group
* group_bgn is the index of the first dq pin (in the write group)
*/
static void scc_mgr_apply_group_dq_in_delay(uint32_t write_group,
uint32_t group_bgn, uint32_t delay)
{
uint32_t i, p;
for (i = 0, p = group_bgn; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++, p++) {
scc_mgr_set_dq_in_delay(write_group, p, delay);
scc_mgr_load_dq(p);
}
}
/* apply and load a particular output delay for the DQ pins in a group */
static void scc_mgr_apply_group_dq_out1_delay(uint32_t write_group,
uint32_t group_bgn,
uint32_t delay1)
{
uint32_t i, p;
for (i = 0, p = group_bgn; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++, p++) {
scc_mgr_set_dq_out1_delay(write_group, i, delay1);
scc_mgr_load_dq(i);
}
}
/* apply and load a particular output delay for the DM pins in a group */
static void scc_mgr_apply_group_dm_out1_delay(uint32_t write_group,
uint32_t delay1)
{
uint32_t i;
for (i = 0; i < RW_MGR_NUM_DM_PER_WRITE_GROUP; i++) {
scc_mgr_set_dm_out1_delay(write_group, i, delay1);
scc_mgr_load_dm(i);
}
}
/* apply and load delay on both DQS and OCT out1 */
static void scc_mgr_apply_group_dqs_io_and_oct_out1(uint32_t write_group,
uint32_t delay)
{
scc_mgr_set_dqs_out1_delay(write_group, delay);
scc_mgr_load_dqs_io();
scc_mgr_set_oct_out1_delay(write_group, delay);
scc_mgr_load_dqs_for_write_group(write_group);
}
/* apply a delay to the entire output side: DQ, DM, DQS, OCT */
static void scc_mgr_apply_group_all_out_delay_add(uint32_t write_group,
uint32_t group_bgn,
uint32_t delay)
{
uint32_t i, p, new_delay;
/* dq shift */
for (i = 0, p = group_bgn; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++, p++) {
new_delay = READ_SCC_DQ_OUT2_DELAY;
new_delay += delay;
if (new_delay > IO_IO_OUT2_DELAY_MAX) {
debug_cond(DLEVEL == 1, "%s:%d (%u, %u, %u) DQ[%u,%u]:\
%u > %lu => %lu", __func__, __LINE__,
write_group, group_bgn, delay, i, p, new_delay,
(long unsigned int)IO_IO_OUT2_DELAY_MAX,
(long unsigned int)IO_IO_OUT2_DELAY_MAX);
new_delay = IO_IO_OUT2_DELAY_MAX;
}
scc_mgr_load_dq(i);
}
/* dm shift */
for (i = 0; i < RW_MGR_NUM_DM_PER_WRITE_GROUP; i++) {
new_delay = READ_SCC_DM_IO_OUT2_DELAY;
new_delay += delay;
if (new_delay > IO_IO_OUT2_DELAY_MAX) {
debug_cond(DLEVEL == 1, "%s:%d (%u, %u, %u) DM[%u]:\
%u > %lu => %lu\n", __func__, __LINE__,
write_group, group_bgn, delay, i, new_delay,
(long unsigned int)IO_IO_OUT2_DELAY_MAX,
(long unsigned int)IO_IO_OUT2_DELAY_MAX);
new_delay = IO_IO_OUT2_DELAY_MAX;
}
scc_mgr_load_dm(i);
}
/* dqs shift */
new_delay = READ_SCC_DQS_IO_OUT2_DELAY;
new_delay += delay;
if (new_delay > IO_IO_OUT2_DELAY_MAX) {
debug_cond(DLEVEL == 1, "%s:%d (%u, %u, %u) DQS: %u > %d => %d;"
" adding %u to OUT1\n", __func__, __LINE__,
write_group, group_bgn, delay, new_delay,
IO_IO_OUT2_DELAY_MAX, IO_IO_OUT2_DELAY_MAX,
new_delay - IO_IO_OUT2_DELAY_MAX);
scc_mgr_set_dqs_out1_delay(write_group, new_delay -
IO_IO_OUT2_DELAY_MAX);
new_delay = IO_IO_OUT2_DELAY_MAX;
}
scc_mgr_load_dqs_io();
/* oct shift */
new_delay = READ_SCC_OCT_OUT2_DELAY;
new_delay += delay;
if (new_delay > IO_IO_OUT2_DELAY_MAX) {
debug_cond(DLEVEL == 1, "%s:%d (%u, %u, %u) DQS: %u > %d => %d;"
" adding %u to OUT1\n", __func__, __LINE__,
write_group, group_bgn, delay, new_delay,
IO_IO_OUT2_DELAY_MAX, IO_IO_OUT2_DELAY_MAX,
new_delay - IO_IO_OUT2_DELAY_MAX);
scc_mgr_set_oct_out1_delay(write_group, new_delay -
IO_IO_OUT2_DELAY_MAX);
new_delay = IO_IO_OUT2_DELAY_MAX;
}
scc_mgr_load_dqs_for_write_group(write_group);
}
/*
* USER apply a delay to the entire output side (DQ, DM, DQS, OCT)
* and to all ranks
*/
static void scc_mgr_apply_group_all_out_delay_add_all_ranks(
uint32_t write_group, uint32_t group_bgn, uint32_t delay)
{
uint32_t r;
uint32_t addr = sdr_get_addr(&sdr_scc_mgr->update);
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
r += NUM_RANKS_PER_SHADOW_REG) {
scc_mgr_apply_group_all_out_delay_add(write_group,
group_bgn, delay);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
}
/* optimization used to recover some slots in ddr3 inst_rom */
/* could be applied to other protocols if we wanted to */
static void set_jump_as_return(void)
{
uint32_t addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr0);
/*
* to save space, we replace return with jump to special shared
* RETURN instruction so we set the counter to large value so that
* we always jump
*/
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add0);
writel(RW_MGR_RETURN, SOCFPGA_SDR_ADDRESS + addr);
}
/*
* should always use constants as argument to ensure all computations are
* performed at compile time
*/
static void delay_for_n_mem_clocks(const uint32_t clocks)
{
uint32_t afi_clocks;
uint8_t inner = 0;
uint8_t outer = 0;
uint16_t c_loop = 0;
uint32_t addr;
debug("%s:%d: clocks=%u ... start\n", __func__, __LINE__, clocks);
afi_clocks = (clocks + AFI_RATE_RATIO-1) / AFI_RATE_RATIO;
/* scale (rounding up) to get afi clocks */
/*
* Note, we don't bother accounting for being off a little bit
* because of a few extra instructions in outer loops
* Note, the loops have a test at the end, and do the test before
* the decrement, and so always perform the loop
* 1 time more than the counter value
*/
if (afi_clocks == 0) {
;
} else if (afi_clocks <= 0x100) {
inner = afi_clocks-1;
outer = 0;
c_loop = 0;
} else if (afi_clocks <= 0x10000) {
inner = 0xff;
outer = (afi_clocks-1) >> 8;
c_loop = 0;
} else {
inner = 0xff;
outer = 0xff;
c_loop = (afi_clocks-1) >> 16;
}
/*
* rom instructions are structured as follows:
*
* IDLE_LOOP2: jnz cntr0, TARGET_A
* IDLE_LOOP1: jnz cntr1, TARGET_B
* return
*
* so, when doing nested loops, TARGET_A is set to IDLE_LOOP2, and
* TARGET_B is set to IDLE_LOOP2 as well
*
* if we have no outer loop, though, then we can use IDLE_LOOP1 only,
* and set TARGET_B to IDLE_LOOP1 and we skip IDLE_LOOP2 entirely
*
* a little confusing, but it helps save precious space in the inst_rom
* and sequencer rom and keeps the delays more accurate and reduces
* overhead
*/
if (afi_clocks <= 0x100) {
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr1);
writel(SKIP_DELAY_LOOP_VALUE_OR_ZERO(inner), SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add1);
writel(RW_MGR_IDLE_LOOP1, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_IDLE_LOOP1, SOCFPGA_SDR_ADDRESS + addr);
} else {
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr0);
writel(SKIP_DELAY_LOOP_VALUE_OR_ZERO(inner), SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr1);
writel(SKIP_DELAY_LOOP_VALUE_OR_ZERO(outer), SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add0);
writel(RW_MGR_IDLE_LOOP2, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add1);
writel(RW_MGR_IDLE_LOOP2, SOCFPGA_SDR_ADDRESS + addr);
/* hack to get around compiler not being smart enough */
if (afi_clocks <= 0x10000) {
/* only need to run once */
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_IDLE_LOOP2, SOCFPGA_SDR_ADDRESS + addr);
} else {
do {
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_IDLE_LOOP2, SOCFPGA_SDR_ADDRESS + addr);
} while (c_loop-- != 0);
}
}
debug("%s:%d clocks=%u ... end\n", __func__, __LINE__, clocks);
}
static void rw_mgr_mem_initialize(void)
{
uint32_t r;
uint32_t addr;
debug("%s:%d\n", __func__, __LINE__);
/* The reset / cke part of initialization is broadcasted to all ranks */
addr = sdr_get_addr((u32 *)RW_MGR_SET_CS_AND_ODT_MASK);
writel(RW_MGR_RANK_ALL, SOCFPGA_SDR_ADDRESS + addr);
/*
* Here's how you load register for a loop
* Counters are located @ 0x800
* Jump address are located @ 0xC00
* For both, registers 0 to 3 are selected using bits 3 and 2, like
* in 0x800, 0x804, 0x808, 0x80C and 0xC00, 0xC04, 0xC08, 0xC0C
* I know this ain't pretty, but Avalon bus throws away the 2 least
* significant bits
*/
/* start with memory RESET activated */
/* tINIT = 200us */
/*
* 200us @ 266MHz (3.75 ns) ~ 54000 clock cycles
* If a and b are the number of iteration in 2 nested loops
* it takes the following number of cycles to complete the operation:
* number_of_cycles = ((2 + n) * a + 2) * b
* where n is the number of instruction in the inner loop
* One possible solution is n = 0 , a = 256 , b = 106 => a = FF,
* b = 6A
*/
/* Load counters */
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr0);
writel(SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TINIT_CNTR0_VAL),
SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr1);
writel(SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TINIT_CNTR1_VAL),
SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr2);
writel(SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TINIT_CNTR2_VAL),
SOCFPGA_SDR_ADDRESS + addr);
/* Load jump address */
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add0);
writel(RW_MGR_INIT_RESET_0_CKE_0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add1);
writel(RW_MGR_INIT_RESET_0_CKE_0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add2);
writel(RW_MGR_INIT_RESET_0_CKE_0, SOCFPGA_SDR_ADDRESS + addr);
/* Execute count instruction */
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_INIT_RESET_0_CKE_0, SOCFPGA_SDR_ADDRESS + addr);
/* indicate that memory is stable */
addr = sdr_get_addr(&phy_mgr_cfg->reset_mem_stbl);
writel(1, SOCFPGA_SDR_ADDRESS + addr);
/*
* transition the RESET to high
* Wait for 500us
*/
/*
* 500us @ 266MHz (3.75 ns) ~ 134000 clock cycles
* If a and b are the number of iteration in 2 nested loops
* it takes the following number of cycles to complete the operation
* number_of_cycles = ((2 + n) * a + 2) * b
* where n is the number of instruction in the inner loop
* One possible solution is n = 2 , a = 131 , b = 256 => a = 83,
* b = FF
*/
/* Load counters */
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr0);
writel(SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TRESET_CNTR0_VAL),
SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr1);
writel(SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TRESET_CNTR1_VAL),
SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr2);
writel(SKIP_DELAY_LOOP_VALUE_OR_ZERO(SEQ_TRESET_CNTR2_VAL),
SOCFPGA_SDR_ADDRESS + addr);
/* Load jump address */
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add0);
writel(RW_MGR_INIT_RESET_1_CKE_0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add1);
writel(RW_MGR_INIT_RESET_1_CKE_0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add2);
writel(RW_MGR_INIT_RESET_1_CKE_0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_INIT_RESET_1_CKE_0, SOCFPGA_SDR_ADDRESS + addr);
/* bring up clock enable */
/* tXRP < 250 ck cycles */
delay_for_n_mem_clocks(250);
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS; r++) {
if (param->skip_ranks[r]) {
/* request to skip the rank */
continue;
}
/* set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_OFF);
/*
* USER Use Mirror-ed commands for odd ranks if address
* mirrorring is on
*/
if ((RW_MGR_MEM_ADDRESS_MIRRORING >> r) & 0x1) {
set_jump_as_return();
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_MRS2_MIRR, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS3_MIRR, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS1_MIRR, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS0_DLL_RESET_MIRR, SOCFPGA_SDR_ADDRESS + addr);
} else {
set_jump_as_return();
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_MRS2, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS3, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS1, SOCFPGA_SDR_ADDRESS + addr);
set_jump_as_return();
writel(RW_MGR_MRS0_DLL_RESET, SOCFPGA_SDR_ADDRESS + addr);
}
set_jump_as_return();
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_ZQCL, SOCFPGA_SDR_ADDRESS + addr);
/* tZQinit = tDLLK = 512 ck cycles */
delay_for_n_mem_clocks(512);
}
}
/*
* At the end of calibration we have to program the user settings in, and
* USER hand off the memory to the user.
*/
static void rw_mgr_mem_handoff(void)
{
uint32_t r;
uint32_t addr;
debug("%s:%d\n", __func__, __LINE__);
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS; r++) {
if (param->skip_ranks[r])
/* request to skip the rank */
continue;
/* set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_OFF);
/* precharge all banks ... */
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_PRECHARGE_ALL, SOCFPGA_SDR_ADDRESS + addr);
/* load up MR settings specified by user */
/*
* Use Mirror-ed commands for odd ranks if address
* mirrorring is on
*/
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
if ((RW_MGR_MEM_ADDRESS_MIRRORING >> r) & 0x1) {
set_jump_as_return();
writel(RW_MGR_MRS2_MIRR, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS3_MIRR, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS1_MIRR, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS0_USER_MIRR, SOCFPGA_SDR_ADDRESS + addr);
} else {
set_jump_as_return();
writel(RW_MGR_MRS2, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS3, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS1, SOCFPGA_SDR_ADDRESS + addr);
delay_for_n_mem_clocks(4);
set_jump_as_return();
writel(RW_MGR_MRS0_USER, SOCFPGA_SDR_ADDRESS + addr);
}
/*
* USER need to wait tMOD (12CK or 15ns) time before issuing
* other commands, but we will have plenty of NIOS cycles before
* actual handoff so its okay.
*/
}
}
/*
* performs a guaranteed read on the patterns we are going to use during a
* read test to ensure memory works
*/
static uint32_t rw_mgr_mem_calibrate_read_test_patterns(uint32_t rank_bgn,
uint32_t group, uint32_t num_tries, uint32_t *bit_chk,
uint32_t all_ranks)
{
uint32_t r, vg;
uint32_t correct_mask_vg;
uint32_t tmp_bit_chk;
uint32_t rank_end = all_ranks ? RW_MGR_MEM_NUMBER_OF_RANKS :
(rank_bgn + NUM_RANKS_PER_SHADOW_REG);
uint32_t addr;
uint32_t base_rw_mgr;
*bit_chk = param->read_correct_mask;
correct_mask_vg = param->read_correct_mask_vg;
for (r = rank_bgn; r < rank_end; r++) {
if (param->skip_ranks[r])
/* request to skip the rank */
continue;
/* set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
/* Load up a constant bursts of read commands */
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr0);
writel(0x20, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add0);
writel(RW_MGR_GUARANTEED_READ, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr1);
writel(0x20, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add1);
writel(RW_MGR_GUARANTEED_READ_CONT, SOCFPGA_SDR_ADDRESS + addr);
tmp_bit_chk = 0;
for (vg = RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS-1; ; vg--) {
/* reset the fifos to get pointers to known state */
addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr((u32 *)RW_MGR_RESET_READ_DATAPATH);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
tmp_bit_chk = tmp_bit_chk << (RW_MGR_MEM_DQ_PER_READ_DQS
/ RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS);
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_GUARANTEED_READ, SOCFPGA_SDR_ADDRESS + addr +
((group * RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS +
vg) << 2));
addr = sdr_get_addr((u32 *)BASE_RW_MGR);
base_rw_mgr = readl(SOCFPGA_SDR_ADDRESS + addr);
tmp_bit_chk = tmp_bit_chk | (correct_mask_vg & (~base_rw_mgr));
if (vg == 0)
break;
}
*bit_chk &= tmp_bit_chk;
}
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_CLEAR_DQS_ENABLE, SOCFPGA_SDR_ADDRESS + addr + (group << 2));
set_rank_and_odt_mask(0, RW_MGR_ODT_MODE_OFF);
debug_cond(DLEVEL == 1, "%s:%d test_load_patterns(%u,ALL) => (%u == %u) =>\
%lu\n", __func__, __LINE__, group, *bit_chk, param->read_correct_mask,
(long unsigned int)(*bit_chk == param->read_correct_mask));
return *bit_chk == param->read_correct_mask;
}
static uint32_t rw_mgr_mem_calibrate_read_test_patterns_all_ranks
(uint32_t group, uint32_t num_tries, uint32_t *bit_chk)
{
return rw_mgr_mem_calibrate_read_test_patterns(0, group,
num_tries, bit_chk, 1);
}
/* load up the patterns we are going to use during a read test */
static void rw_mgr_mem_calibrate_read_load_patterns(uint32_t rank_bgn,
uint32_t all_ranks)
{
uint32_t r;
uint32_t addr;
uint32_t rank_end = all_ranks ? RW_MGR_MEM_NUMBER_OF_RANKS :
(rank_bgn + NUM_RANKS_PER_SHADOW_REG);
debug("%s:%d\n", __func__, __LINE__);
for (r = rank_bgn; r < rank_end; r++) {
if (param->skip_ranks[r])
/* request to skip the rank */
continue;
/* set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
/* Load up a constant bursts */
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr0);
writel(0x20, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add0);
writel(RW_MGR_GUARANTEED_WRITE_WAIT0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr1);
writel(0x20, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add1);
writel(RW_MGR_GUARANTEED_WRITE_WAIT1, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr2);
writel(0x04, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add2);
writel(RW_MGR_GUARANTEED_WRITE_WAIT2, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr3);
writel(0x04, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add3);
writel(RW_MGR_GUARANTEED_WRITE_WAIT3, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_GUARANTEED_WRITE, SOCFPGA_SDR_ADDRESS + addr);
}
set_rank_and_odt_mask(0, RW_MGR_ODT_MODE_OFF);
}
/*
* try a read and see if it returns correct data back. has dummy reads
* inserted into the mix used to align dqs enable. has more thorough checks
* than the regular read test.
*/
static uint32_t rw_mgr_mem_calibrate_read_test(uint32_t rank_bgn, uint32_t group,
uint32_t num_tries, uint32_t all_correct, uint32_t *bit_chk,
uint32_t all_groups, uint32_t all_ranks)
{
uint32_t r, vg;
uint32_t correct_mask_vg;
uint32_t tmp_bit_chk;
uint32_t rank_end = all_ranks ? RW_MGR_MEM_NUMBER_OF_RANKS :
(rank_bgn + NUM_RANKS_PER_SHADOW_REG);
uint32_t addr;
uint32_t base_rw_mgr;
*bit_chk = param->read_correct_mask;
correct_mask_vg = param->read_correct_mask_vg;
uint32_t quick_read_mode = (((STATIC_CALIB_STEPS) &
CALIB_SKIP_DELAY_SWEEPS) && ENABLE_SUPER_QUICK_CALIBRATION);
for (r = rank_bgn; r < rank_end; r++) {
if (param->skip_ranks[r])
/* request to skip the rank */
continue;
/* set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr1);
writel(0x10, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add1);
writel(RW_MGR_READ_B2B_WAIT1, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr2);
writel(0x10, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add2);
writel(RW_MGR_READ_B2B_WAIT2, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr0);
if (quick_read_mode)
writel(0x1, SOCFPGA_SDR_ADDRESS + addr);
/* need at least two (1+1) reads to capture failures */
else if (all_groups)
writel(0x06, SOCFPGA_SDR_ADDRESS + addr);
else
writel(0x32, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add0);
writel(RW_MGR_READ_B2B, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr3);
if (all_groups)
writel(RW_MGR_MEM_IF_READ_DQS_WIDTH *
RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS - 1,
SOCFPGA_SDR_ADDRESS + addr);
else
writel(0x0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add3);
writel(RW_MGR_READ_B2B, SOCFPGA_SDR_ADDRESS + addr);
tmp_bit_chk = 0;
for (vg = RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS-1; ; vg--) {
/* reset the fifos to get pointers to known state */
addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr((u32 *)RW_MGR_RESET_READ_DATAPATH);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
tmp_bit_chk = tmp_bit_chk << (RW_MGR_MEM_DQ_PER_READ_DQS
/ RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS);
addr = sdr_get_addr((u32 *)(all_groups ? RW_MGR_RUN_ALL_GROUPS :
RW_MGR_RUN_SINGLE_GROUP));
writel(RW_MGR_READ_B2B, SOCFPGA_SDR_ADDRESS + addr +
((group * RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS +
vg) << 2));
addr = sdr_get_addr((u32 *)BASE_RW_MGR);
base_rw_mgr = readl(SOCFPGA_SDR_ADDRESS + addr);
tmp_bit_chk = tmp_bit_chk | (correct_mask_vg & ~(base_rw_mgr));
if (vg == 0)
break;
}
*bit_chk &= tmp_bit_chk;
}
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_CLEAR_DQS_ENABLE, SOCFPGA_SDR_ADDRESS + addr + (group << 2));
if (all_correct) {
set_rank_and_odt_mask(0, RW_MGR_ODT_MODE_OFF);
debug_cond(DLEVEL == 2, "%s:%d read_test(%u,ALL,%u) =>\
(%u == %u) => %lu", __func__, __LINE__, group,
all_groups, *bit_chk, param->read_correct_mask,
(long unsigned int)(*bit_chk ==
param->read_correct_mask));
return *bit_chk == param->read_correct_mask;
} else {
set_rank_and_odt_mask(0, RW_MGR_ODT_MODE_OFF);
debug_cond(DLEVEL == 2, "%s:%d read_test(%u,ONE,%u) =>\
(%u != %lu) => %lu\n", __func__, __LINE__,
group, all_groups, *bit_chk, (long unsigned int)0,
(long unsigned int)(*bit_chk != 0x00));
return *bit_chk != 0x00;
}
}
static uint32_t rw_mgr_mem_calibrate_read_test_all_ranks(uint32_t group,
uint32_t num_tries, uint32_t all_correct, uint32_t *bit_chk,
uint32_t all_groups)
{
return rw_mgr_mem_calibrate_read_test(0, group, num_tries, all_correct,
bit_chk, all_groups, 1);
}
static void rw_mgr_incr_vfifo(uint32_t grp, uint32_t *v)
{
uint32_t addr = sdr_get_addr(&phy_mgr_cmd->inc_vfifo_hard_phy);
writel(grp, SOCFPGA_SDR_ADDRESS + addr);
(*v)++;
}
static void rw_mgr_decr_vfifo(uint32_t grp, uint32_t *v)
{
uint32_t i;
for (i = 0; i < VFIFO_SIZE-1; i++)
rw_mgr_incr_vfifo(grp, v);
}
static int find_vfifo_read(uint32_t grp, uint32_t *bit_chk)
{
uint32_t v;
uint32_t fail_cnt = 0;
uint32_t test_status;
for (v = 0; v < VFIFO_SIZE; ) {
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: vfifo %u\n",
__func__, __LINE__, v);
test_status = rw_mgr_mem_calibrate_read_test_all_ranks
(grp, 1, PASS_ONE_BIT, bit_chk, 0);
if (!test_status) {
fail_cnt++;
if (fail_cnt == 2)
break;
}
/* fiddle with FIFO */
rw_mgr_incr_vfifo(grp, &v);
}
if (v >= VFIFO_SIZE) {
/* no failing read found!! Something must have gone wrong */
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: vfifo failed\n",
__func__, __LINE__);
return 0;
} else {
return v;
}
}
static int find_working_phase(uint32_t *grp, uint32_t *bit_chk,
uint32_t dtaps_per_ptap, uint32_t *work_bgn,
uint32_t *v, uint32_t *d, uint32_t *p,
uint32_t *i, uint32_t *max_working_cnt)
{
uint32_t found_begin = 0;
uint32_t tmp_delay = 0;
uint32_t test_status;
for (*d = 0; *d <= dtaps_per_ptap; (*d)++, tmp_delay +=
IO_DELAY_PER_DQS_EN_DCHAIN_TAP) {
*work_bgn = tmp_delay;
scc_mgr_set_dqs_en_delay_all_ranks(*grp, *d);
for (*i = 0; *i < VFIFO_SIZE; (*i)++) {
for (*p = 0; *p <= IO_DQS_EN_PHASE_MAX; (*p)++, *work_bgn +=
IO_DELAY_PER_OPA_TAP) {
scc_mgr_set_dqs_en_phase_all_ranks(*grp, *p);
test_status =
rw_mgr_mem_calibrate_read_test_all_ranks
(*grp, 1, PASS_ONE_BIT, bit_chk, 0);
if (test_status) {
*max_working_cnt = 1;
found_begin = 1;
break;
}
}
if (found_begin)
break;
if (*p > IO_DQS_EN_PHASE_MAX)
/* fiddle with FIFO */
rw_mgr_incr_vfifo(*grp, v);
}
if (found_begin)
break;
}
if (*i >= VFIFO_SIZE) {
/* cannot find working solution */
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: no vfifo/\
ptap/dtap\n", __func__, __LINE__);
return 0;
} else {
return 1;
}
}
static void sdr_backup_phase(uint32_t *grp, uint32_t *bit_chk,
uint32_t *work_bgn, uint32_t *v, uint32_t *d,
uint32_t *p, uint32_t *max_working_cnt)
{
uint32_t found_begin = 0;
uint32_t tmp_delay;
/* Special case code for backing up a phase */
if (*p == 0) {
*p = IO_DQS_EN_PHASE_MAX;
rw_mgr_decr_vfifo(*grp, v);
} else {
(*p)--;
}
tmp_delay = *work_bgn - IO_DELAY_PER_OPA_TAP;
scc_mgr_set_dqs_en_phase_all_ranks(*grp, *p);
for (*d = 0; *d <= IO_DQS_EN_DELAY_MAX && tmp_delay < *work_bgn;
(*d)++, tmp_delay += IO_DELAY_PER_DQS_EN_DCHAIN_TAP) {
scc_mgr_set_dqs_en_delay_all_ranks(*grp, *d);
if (rw_mgr_mem_calibrate_read_test_all_ranks(*grp, 1,
PASS_ONE_BIT,
bit_chk, 0)) {
found_begin = 1;
*work_bgn = tmp_delay;
break;
}
}
/* We have found a working dtap before the ptap found above */
if (found_begin == 1)
(*max_working_cnt)++;
/*
* Restore VFIFO to old state before we decremented it
* (if needed).
*/
(*p)++;
if (*p > IO_DQS_EN_PHASE_MAX) {
*p = 0;
rw_mgr_incr_vfifo(*grp, v);
}
scc_mgr_set_dqs_en_delay_all_ranks(*grp, 0);
}
static int sdr_nonworking_phase(uint32_t *grp, uint32_t *bit_chk,
uint32_t *work_bgn, uint32_t *v, uint32_t *d,
uint32_t *p, uint32_t *i, uint32_t *max_working_cnt,
uint32_t *work_end)
{
uint32_t found_end = 0;
(*p)++;
*work_end += IO_DELAY_PER_OPA_TAP;
if (*p > IO_DQS_EN_PHASE_MAX) {
/* fiddle with FIFO */
*p = 0;
rw_mgr_incr_vfifo(*grp, v);
}
for (; *i < VFIFO_SIZE + 1; (*i)++) {
for (; *p <= IO_DQS_EN_PHASE_MAX; (*p)++, *work_end
+= IO_DELAY_PER_OPA_TAP) {
scc_mgr_set_dqs_en_phase_all_ranks(*grp, *p);
if (!rw_mgr_mem_calibrate_read_test_all_ranks
(*grp, 1, PASS_ONE_BIT, bit_chk, 0)) {
found_end = 1;
break;
} else {
(*max_working_cnt)++;
}
}
if (found_end)
break;
if (*p > IO_DQS_EN_PHASE_MAX) {
/* fiddle with FIFO */
rw_mgr_incr_vfifo(*grp, v);
*p = 0;
}
}
if (*i >= VFIFO_SIZE + 1) {
/* cannot see edge of failing read */
debug_cond(DLEVEL == 2, "%s:%d sdr_nonworking_phase: end:\
failed\n", __func__, __LINE__);
return 0;
} else {
return 1;
}
}
static int sdr_find_window_centre(uint32_t *grp, uint32_t *bit_chk,
uint32_t *work_bgn, uint32_t *v, uint32_t *d,
uint32_t *p, uint32_t *work_mid,
uint32_t *work_end)
{
int i;
int tmp_delay = 0;
*work_mid = (*work_bgn + *work_end) / 2;
debug_cond(DLEVEL == 2, "work_bgn=%d work_end=%d work_mid=%d\n",
*work_bgn, *work_end, *work_mid);
/* Get the middle delay to be less than a VFIFO delay */
for (*p = 0; *p <= IO_DQS_EN_PHASE_MAX;
(*p)++, tmp_delay += IO_DELAY_PER_OPA_TAP)
;
debug_cond(DLEVEL == 2, "vfifo ptap delay %d\n", tmp_delay);
while (*work_mid > tmp_delay)
*work_mid -= tmp_delay;
debug_cond(DLEVEL == 2, "new work_mid %d\n", *work_mid);
tmp_delay = 0;
for (*p = 0; *p <= IO_DQS_EN_PHASE_MAX && tmp_delay < *work_mid;
(*p)++, tmp_delay += IO_DELAY_PER_OPA_TAP)
;
tmp_delay -= IO_DELAY_PER_OPA_TAP;
debug_cond(DLEVEL == 2, "new p %d, tmp_delay=%d\n", (*p) - 1, tmp_delay);
for (*d = 0; *d <= IO_DQS_EN_DELAY_MAX && tmp_delay < *work_mid; (*d)++,
tmp_delay += IO_DELAY_PER_DQS_EN_DCHAIN_TAP)
;
debug_cond(DLEVEL == 2, "new d %d, tmp_delay=%d\n", *d, tmp_delay);
scc_mgr_set_dqs_en_phase_all_ranks(*grp, (*p) - 1);
scc_mgr_set_dqs_en_delay_all_ranks(*grp, *d);
/*
* push vfifo until we can successfully calibrate. We can do this
* because the largest possible margin in 1 VFIFO cycle.
*/
for (i = 0; i < VFIFO_SIZE; i++) {
debug_cond(DLEVEL == 2, "find_dqs_en_phase: center: vfifo=%u\n",
*v);
if (rw_mgr_mem_calibrate_read_test_all_ranks(*grp, 1,
PASS_ONE_BIT,
bit_chk, 0)) {
break;
}
/* fiddle with FIFO */
rw_mgr_incr_vfifo(*grp, v);
}
if (i >= VFIFO_SIZE) {
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: center: \
failed\n", __func__, __LINE__);
return 0;
} else {
return 1;
}
}
/* find a good dqs enable to use */
static uint32_t rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(uint32_t grp)
{
uint32_t v, d, p, i;
uint32_t max_working_cnt;
uint32_t bit_chk;
uint32_t dtaps_per_ptap;
uint32_t work_bgn, work_mid, work_end;
uint32_t found_passing_read, found_failing_read, initial_failing_dtap;
uint32_t addr;
debug("%s:%d %u\n", __func__, __LINE__, grp);
reg_file_set_sub_stage(CAL_SUBSTAGE_VFIFO_CENTER);
scc_mgr_set_dqs_en_delay_all_ranks(grp, 0);
scc_mgr_set_dqs_en_phase_all_ranks(grp, 0);
/* ************************************************************** */
/* * Step 0 : Determine number of delay taps for each phase tap * */
dtaps_per_ptap = IO_DELAY_PER_OPA_TAP/IO_DELAY_PER_DQS_EN_DCHAIN_TAP;
/* ********************************************************* */
/* * Step 1 : First push vfifo until we get a failing read * */
v = find_vfifo_read(grp, &bit_chk);
max_working_cnt = 0;
/* ******************************************************** */
/* * step 2: find first working phase, increment in ptaps * */
work_bgn = 0;
if (find_working_phase(&grp, &bit_chk, dtaps_per_ptap, &work_bgn, &v, &d,
&p, &i, &max_working_cnt) == 0)
return 0;
work_end = work_bgn;
/*
* If d is 0 then the working window covers a phase tap and
* we can follow the old procedure otherwise, we've found the beginning,
* and we need to increment the dtaps until we find the end.
*/
if (d == 0) {
/* ********************************************************* */
/* * step 3a: if we have room, back off by one and
increment in dtaps * */
sdr_backup_phase(&grp, &bit_chk, &work_bgn, &v, &d, &p,
&max_working_cnt);
/* ********************************************************* */
/* * step 4a: go forward from working phase to non working
phase, increment in ptaps * */
if (sdr_nonworking_phase(&grp, &bit_chk, &work_bgn, &v, &d, &p,
&i, &max_working_cnt, &work_end) == 0)
return 0;
/* ********************************************************* */
/* * step 5a: back off one from last, increment in dtaps * */
/* Special case code for backing up a phase */
if (p == 0) {
p = IO_DQS_EN_PHASE_MAX;
rw_mgr_decr_vfifo(grp, &v);
} else {
p = p - 1;
}
work_end -= IO_DELAY_PER_OPA_TAP;
scc_mgr_set_dqs_en_phase_all_ranks(grp, p);
/* * The actual increment of dtaps is done outside of
the if/else loop to share code */
d = 0;
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: v/p: \
vfifo=%u ptap=%u\n", __func__, __LINE__,
v, p);
} else {
/* ******************************************************* */
/* * step 3-5b: Find the right edge of the window using
delay taps * */
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase:vfifo=%u \
ptap=%u dtap=%u bgn=%u\n", __func__, __LINE__,
v, p, d, work_bgn);
work_end = work_bgn;
/* * The actual increment of dtaps is done outside of the
if/else loop to share code */
/* Only here to counterbalance a subtract later on which is
not needed if this branch of the algorithm is taken */
max_working_cnt++;
}
/* The dtap increment to find the failing edge is done here */
for (; d <= IO_DQS_EN_DELAY_MAX; d++, work_end +=
IO_DELAY_PER_DQS_EN_DCHAIN_TAP) {
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: \
end-2: dtap=%u\n", __func__, __LINE__, d);
scc_mgr_set_dqs_en_delay_all_ranks(grp, d);
if (!rw_mgr_mem_calibrate_read_test_all_ranks(grp, 1,
PASS_ONE_BIT,
&bit_chk, 0)) {
break;
}
}
/* Go back to working dtap */
if (d != 0)
work_end -= IO_DELAY_PER_DQS_EN_DCHAIN_TAP;
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: v/p/d: vfifo=%u \
ptap=%u dtap=%u end=%u\n", __func__, __LINE__,
v, p, d-1, work_end);
if (work_end < work_bgn) {
/* nil range */
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: end-2: \
failed\n", __func__, __LINE__);
return 0;
}
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: found range [%u,%u]\n",
__func__, __LINE__, work_bgn, work_end);
/* *************************************************************** */
/*
* * We need to calculate the number of dtaps that equal a ptap
* * To do that we'll back up a ptap and re-find the edge of the
* * window using dtaps
*/
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: calculate dtaps_per_ptap \
for tracking\n", __func__, __LINE__);
/* Special case code for backing up a phase */
if (p == 0) {
p = IO_DQS_EN_PHASE_MAX;
rw_mgr_decr_vfifo(grp, &v);
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: backedup \
cycle/phase: v=%u p=%u\n", __func__, __LINE__,
v, p);
} else {
p = p - 1;
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: backedup \
phase only: v=%u p=%u", __func__, __LINE__,
v, p);
}
scc_mgr_set_dqs_en_phase_all_ranks(grp, p);
/*
* Increase dtap until we first see a passing read (in case the
* window is smaller than a ptap),
* and then a failing read to mark the edge of the window again
*/
/* Find a passing read */
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: find passing read\n",
__func__, __LINE__);
found_passing_read = 0;
found_failing_read = 0;
initial_failing_dtap = d;
for (; d <= IO_DQS_EN_DELAY_MAX; d++) {
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: testing \
read d=%u\n", __func__, __LINE__, d);
scc_mgr_set_dqs_en_delay_all_ranks(grp, d);
if (rw_mgr_mem_calibrate_read_test_all_ranks(grp, 1,
PASS_ONE_BIT,
&bit_chk, 0)) {
found_passing_read = 1;
break;
}
}
if (found_passing_read) {
/* Find a failing read */
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: find failing \
read\n", __func__, __LINE__);
for (d = d + 1; d <= IO_DQS_EN_DELAY_MAX; d++) {
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: \
testing read d=%u\n", __func__, __LINE__, d);
scc_mgr_set_dqs_en_delay_all_ranks(grp, d);
if (!rw_mgr_mem_calibrate_read_test_all_ranks
(grp, 1, PASS_ONE_BIT, &bit_chk, 0)) {
found_failing_read = 1;
break;
}
}
} else {
debug_cond(DLEVEL == 1, "%s:%d find_dqs_en_phase: failed to \
calculate dtaps", __func__, __LINE__);
debug_cond(DLEVEL == 1, "per ptap. Fall back on static value\n");
}
/*
* The dynamically calculated dtaps_per_ptap is only valid if we
* found a passing/failing read. If we didn't, it means d hit the max
* (IO_DQS_EN_DELAY_MAX). Otherwise, dtaps_per_ptap retains its
* statically calculated value.
*/
if (found_passing_read && found_failing_read)
dtaps_per_ptap = d - initial_failing_dtap;
addr = sdr_get_addr(&sdr_reg_file->dtaps_per_ptap);
writel(dtaps_per_ptap, SOCFPGA_SDR_ADDRESS + addr);
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: dtaps_per_ptap=%u \
- %u = %u", __func__, __LINE__, d,
initial_failing_dtap, dtaps_per_ptap);
/* ******************************************** */
/* * step 6: Find the centre of the window * */
if (sdr_find_window_centre(&grp, &bit_chk, &work_bgn, &v, &d, &p,
&work_mid, &work_end) == 0)
return 0;
debug_cond(DLEVEL == 2, "%s:%d find_dqs_en_phase: center found: \
vfifo=%u ptap=%u dtap=%u\n", __func__, __LINE__,
v, p-1, d);
return 1;
}
/*
* Try rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase across different
* dq_in_delay values
*/
static uint32_t
rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay
(uint32_t write_group, uint32_t read_group, uint32_t test_bgn)
{
uint32_t found;
uint32_t i;
uint32_t p;
uint32_t d;
uint32_t r;
uint32_t addr;
const uint32_t delay_step = IO_IO_IN_DELAY_MAX /
(RW_MGR_MEM_DQ_PER_READ_DQS-1);
/* we start at zero, so have one less dq to devide among */
debug("%s:%d (%u,%u,%u)", __func__, __LINE__, write_group, read_group,
test_bgn);
/* try different dq_in_delays since the dq path is shorter than dqs */
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
r += NUM_RANKS_PER_SHADOW_REG) {
for (i = 0, p = test_bgn, d = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS;
i++, p++, d += delay_step) {
debug_cond(DLEVEL == 1, "%s:%d rw_mgr_mem_calibrate_\
vfifo_find_dqs_", __func__, __LINE__);
debug_cond(DLEVEL == 1, "en_phase_sweep_dq_in_delay: g=%u/%u ",
write_group, read_group);
debug_cond(DLEVEL == 1, "r=%u, i=%u p=%u d=%u\n", r, i , p, d);
scc_mgr_set_dq_in_delay(write_group, p, d);
scc_mgr_load_dq(p);
}
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
found = rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase(read_group);
debug_cond(DLEVEL == 1, "%s:%d rw_mgr_mem_calibrate_vfifo_find_dqs_\
en_phase_sweep_dq", __func__, __LINE__);
debug_cond(DLEVEL == 1, "_in_delay: g=%u/%u found=%u; Reseting delay \
chain to zero\n", write_group, read_group, found);
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
r += NUM_RANKS_PER_SHADOW_REG) {
for (i = 0, p = test_bgn; i < RW_MGR_MEM_DQ_PER_READ_DQS;
i++, p++) {
scc_mgr_set_dq_in_delay(write_group, p, 0);
scc_mgr_load_dq(p);
}
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
return found;
}
/* per-bit deskew DQ and center */
static uint32_t rw_mgr_mem_calibrate_vfifo_center(uint32_t rank_bgn,
uint32_t write_group, uint32_t read_group, uint32_t test_bgn,
uint32_t use_read_test, uint32_t update_fom)
{
uint32_t i, p, d, min_index;
/*
* Store these as signed since there are comparisons with
* signed numbers.
*/
uint32_t bit_chk;
uint32_t sticky_bit_chk;
int32_t left_edge[RW_MGR_MEM_DQ_PER_READ_DQS];
int32_t right_edge[RW_MGR_MEM_DQ_PER_READ_DQS];
int32_t final_dq[RW_MGR_MEM_DQ_PER_READ_DQS];
int32_t mid;
int32_t orig_mid_min, mid_min;
int32_t new_dqs, start_dqs, start_dqs_en, shift_dq, final_dqs,
final_dqs_en;
int32_t dq_margin, dqs_margin;
uint32_t stop;
uint32_t temp_dq_in_delay1, temp_dq_in_delay2;
uint32_t addr;
debug("%s:%d: %u %u", __func__, __LINE__, read_group, test_bgn);
addr = sdr_get_addr((u32 *)SCC_MGR_DQS_IN_DELAY);
start_dqs = readl(SOCFPGA_SDR_ADDRESS + addr + (read_group << 2));
if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS)
start_dqs_en = readl(SOCFPGA_SDR_ADDRESS + addr + ((read_group << 2)
- IO_DQS_EN_DELAY_OFFSET));
/* set the left and right edge of each bit to an illegal value */
/* use (IO_IO_IN_DELAY_MAX + 1) as an illegal value */
sticky_bit_chk = 0;
for (i = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) {
left_edge[i] = IO_IO_IN_DELAY_MAX + 1;
right_edge[i] = IO_IO_IN_DELAY_MAX + 1;
}
addr = sdr_get_addr(&sdr_scc_mgr->update);
/* Search for the left edge of the window for each bit */
for (d = 0; d <= IO_IO_IN_DELAY_MAX; d++) {
scc_mgr_apply_group_dq_in_delay(write_group, test_bgn, d);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/*
* Stop searching when the read test doesn't pass AND when
* we've seen a passing read on every bit.
*/
if (use_read_test) {
stop = !rw_mgr_mem_calibrate_read_test(rank_bgn,
read_group, NUM_READ_PB_TESTS, PASS_ONE_BIT,
&bit_chk, 0, 0);
} else {
rw_mgr_mem_calibrate_write_test(rank_bgn, write_group,
0, PASS_ONE_BIT,
&bit_chk, 0);
bit_chk = bit_chk >> (RW_MGR_MEM_DQ_PER_READ_DQS *
(read_group - (write_group *
RW_MGR_MEM_IF_READ_DQS_WIDTH /
RW_MGR_MEM_IF_WRITE_DQS_WIDTH)));
stop = (bit_chk == 0);
}
sticky_bit_chk = sticky_bit_chk | bit_chk;
stop = stop && (sticky_bit_chk == param->read_correct_mask);
debug_cond(DLEVEL == 2, "%s:%d vfifo_center(left): dtap=%u => %u == %u \
&& %u", __func__, __LINE__, d,
sticky_bit_chk,
param->read_correct_mask, stop);
if (stop == 1) {
break;
} else {
for (i = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) {
if (bit_chk & 1) {
/* Remember a passing test as the
left_edge */
left_edge[i] = d;
} else {
/* If a left edge has not been seen yet,
then a future passing test will mark
this edge as the right edge */
if (left_edge[i] ==
IO_IO_IN_DELAY_MAX + 1) {
right_edge[i] = -(d + 1);
}
}
bit_chk = bit_chk >> 1;
}
}
}
/* Reset DQ delay chains to 0 */
scc_mgr_apply_group_dq_in_delay(write_group, test_bgn, 0);
sticky_bit_chk = 0;
for (i = RW_MGR_MEM_DQ_PER_READ_DQS - 1;; i--) {
debug_cond(DLEVEL == 2, "%s:%d vfifo_center: left_edge[%u]: \
%d right_edge[%u]: %d\n", __func__, __LINE__,
i, left_edge[i], i, right_edge[i]);
/*
* Check for cases where we haven't found the left edge,
* which makes our assignment of the the right edge invalid.
* Reset it to the illegal value.
*/
if ((left_edge[i] == IO_IO_IN_DELAY_MAX + 1) && (
right_edge[i] != IO_IO_IN_DELAY_MAX + 1)) {
right_edge[i] = IO_IO_IN_DELAY_MAX + 1;
debug_cond(DLEVEL == 2, "%s:%d vfifo_center: reset \
right_edge[%u]: %d\n", __func__, __LINE__,
i, right_edge[i]);
}
/*
* Reset sticky bit (except for bits where we have seen
* both the left and right edge).
*/
sticky_bit_chk = sticky_bit_chk << 1;
if ((left_edge[i] != IO_IO_IN_DELAY_MAX + 1) &&
(right_edge[i] != IO_IO_IN_DELAY_MAX + 1)) {
sticky_bit_chk = sticky_bit_chk | 1;
}
if (i == 0)
break;
}
addr = sdr_get_addr(&sdr_scc_mgr->update);
/* Search for the right edge of the window for each bit */
for (d = 0; d <= IO_DQS_IN_DELAY_MAX - start_dqs; d++) {
scc_mgr_set_dqs_bus_in_delay(read_group, d + start_dqs);
if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) {
uint32_t delay = d + start_dqs_en;
if (delay > IO_DQS_EN_DELAY_MAX)
delay = IO_DQS_EN_DELAY_MAX;
scc_mgr_set_dqs_en_delay(read_group, delay);
}
scc_mgr_load_dqs(read_group);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/*
* Stop searching when the read test doesn't pass AND when
* we've seen a passing read on every bit.
*/
if (use_read_test) {
stop = !rw_mgr_mem_calibrate_read_test(rank_bgn,
read_group, NUM_READ_PB_TESTS, PASS_ONE_BIT,
&bit_chk, 0, 0);
} else {
rw_mgr_mem_calibrate_write_test(rank_bgn, write_group,
0, PASS_ONE_BIT,
&bit_chk, 0);
bit_chk = bit_chk >> (RW_MGR_MEM_DQ_PER_READ_DQS *
(read_group - (write_group *
RW_MGR_MEM_IF_READ_DQS_WIDTH /
RW_MGR_MEM_IF_WRITE_DQS_WIDTH)));
stop = (bit_chk == 0);
}
sticky_bit_chk = sticky_bit_chk | bit_chk;
stop = stop && (sticky_bit_chk == param->read_correct_mask);
debug_cond(DLEVEL == 2, "%s:%d vfifo_center(right): dtap=%u => %u == \
%u && %u", __func__, __LINE__, d,
sticky_bit_chk, param->read_correct_mask, stop);
if (stop == 1) {
break;
} else {
for (i = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) {
if (bit_chk & 1) {
/* Remember a passing test as
the right_edge */
right_edge[i] = d;
} else {
if (d != 0) {
/* If a right edge has not been
seen yet, then a future passing
test will mark this edge as the
left edge */
if (right_edge[i] ==
IO_IO_IN_DELAY_MAX + 1) {
left_edge[i] = -(d + 1);
}
} else {
/* d = 0 failed, but it passed
when testing the left edge,
so it must be marginal,
set it to -1 */
if (right_edge[i] ==
IO_IO_IN_DELAY_MAX + 1 &&
left_edge[i] !=
IO_IO_IN_DELAY_MAX
+ 1) {
right_edge[i] = -1;
}
/* If a right edge has not been
seen yet, then a future passing
test will mark this edge as the
left edge */
else if (right_edge[i] ==
IO_IO_IN_DELAY_MAX +
1) {
left_edge[i] = -(d + 1);
}
}
}
debug_cond(DLEVEL == 2, "%s:%d vfifo_center[r,\
d=%u]: ", __func__, __LINE__, d);
debug_cond(DLEVEL == 2, "bit_chk_test=%d left_edge[%u]: %d ",
(int)(bit_chk & 1), i, left_edge[i]);
debug_cond(DLEVEL == 2, "right_edge[%u]: %d\n", i,
right_edge[i]);
bit_chk = bit_chk >> 1;
}
}
}
/* Check that all bits have a window */
addr = sdr_get_addr(&sdr_scc_mgr->update);
for (i = 0; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) {
debug_cond(DLEVEL == 2, "%s:%d vfifo_center: left_edge[%u]: \
%d right_edge[%u]: %d", __func__, __LINE__,
i, left_edge[i], i, right_edge[i]);
if ((left_edge[i] == IO_IO_IN_DELAY_MAX + 1) || (right_edge[i]
== IO_IO_IN_DELAY_MAX + 1)) {
/*
* Restore delay chain settings before letting the loop
* in rw_mgr_mem_calibrate_vfifo to retry different
* dqs/ck relationships.
*/
scc_mgr_set_dqs_bus_in_delay(read_group, start_dqs);
if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) {
scc_mgr_set_dqs_en_delay(read_group,
start_dqs_en);
}
scc_mgr_load_dqs(read_group);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
debug_cond(DLEVEL == 1, "%s:%d vfifo_center: failed to \
find edge [%u]: %d %d", __func__, __LINE__,
i, left_edge[i], right_edge[i]);
if (use_read_test) {
set_failing_group_stage(read_group *
RW_MGR_MEM_DQ_PER_READ_DQS + i,
CAL_STAGE_VFIFO,
CAL_SUBSTAGE_VFIFO_CENTER);
} else {
set_failing_group_stage(read_group *
RW_MGR_MEM_DQ_PER_READ_DQS + i,
CAL_STAGE_VFIFO_AFTER_WRITES,
CAL_SUBSTAGE_VFIFO_CENTER);
}
return 0;
}
}
/* Find middle of window for each DQ bit */
mid_min = left_edge[0] - right_edge[0];
min_index = 0;
for (i = 1; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++) {
mid = left_edge[i] - right_edge[i];
if (mid < mid_min) {
mid_min = mid;
min_index = i;
}
}
/*
* -mid_min/2 represents the amount that we need to move DQS.
* If mid_min is odd and positive we'll need to add one to
* make sure the rounding in further calculations is correct
* (always bias to the right), so just add 1 for all positive values.
*/
if (mid_min > 0)
mid_min++;
mid_min = mid_min / 2;
debug_cond(DLEVEL == 1, "%s:%d vfifo_center: mid_min=%d (index=%u)\n",
__func__, __LINE__, mid_min, min_index);
/* Determine the amount we can change DQS (which is -mid_min) */
orig_mid_min = mid_min;
new_dqs = start_dqs - mid_min;
if (new_dqs > IO_DQS_IN_DELAY_MAX)
new_dqs = IO_DQS_IN_DELAY_MAX;
else if (new_dqs < 0)
new_dqs = 0;
mid_min = start_dqs - new_dqs;
debug_cond(DLEVEL == 1, "vfifo_center: new mid_min=%d new_dqs=%d\n",
mid_min, new_dqs);
if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) {
if (start_dqs_en - mid_min > IO_DQS_EN_DELAY_MAX)
mid_min += start_dqs_en - mid_min - IO_DQS_EN_DELAY_MAX;
else if (start_dqs_en - mid_min < 0)
mid_min += start_dqs_en - mid_min;
}
new_dqs = start_dqs - mid_min;
debug_cond(DLEVEL == 1, "vfifo_center: start_dqs=%d start_dqs_en=%d \
new_dqs=%d mid_min=%d\n", start_dqs,
IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS ? start_dqs_en : -1,
new_dqs, mid_min);
/* Initialize data for export structures */
dqs_margin = IO_IO_IN_DELAY_MAX + 1;
dq_margin = IO_IO_IN_DELAY_MAX + 1;
addr = sdr_get_addr((u32 *)SCC_MGR_IO_IN_DELAY);
/* add delay to bring centre of all DQ windows to the same "level" */
for (i = 0, p = test_bgn; i < RW_MGR_MEM_DQ_PER_READ_DQS; i++, p++) {
/* Use values before divide by 2 to reduce round off error */
shift_dq = (left_edge[i] - right_edge[i] -
(left_edge[min_index] - right_edge[min_index]))/2 +
(orig_mid_min - mid_min);
debug_cond(DLEVEL == 2, "vfifo_center: before: \
shift_dq[%u]=%d\n", i, shift_dq);
temp_dq_in_delay1 = readl(SOCFPGA_SDR_ADDRESS + addr + (p << 2));
temp_dq_in_delay2 = readl(SOCFPGA_SDR_ADDRESS + addr + (i << 2));
if (shift_dq + (int32_t)temp_dq_in_delay1 >
(int32_t)IO_IO_IN_DELAY_MAX) {
shift_dq = (int32_t)IO_IO_IN_DELAY_MAX - temp_dq_in_delay2;
} else if (shift_dq + (int32_t)temp_dq_in_delay1 < 0) {
shift_dq = -(int32_t)temp_dq_in_delay1;
}
debug_cond(DLEVEL == 2, "vfifo_center: after: \
shift_dq[%u]=%d\n", i, shift_dq);
final_dq[i] = temp_dq_in_delay1 + shift_dq;
scc_mgr_set_dq_in_delay(write_group, p, final_dq[i]);
scc_mgr_load_dq(p);
debug_cond(DLEVEL == 2, "vfifo_center: margin[%u]=[%d,%d]\n", i,
left_edge[i] - shift_dq + (-mid_min),
right_edge[i] + shift_dq - (-mid_min));
/* To determine values for export structures */
if (left_edge[i] - shift_dq + (-mid_min) < dq_margin)
dq_margin = left_edge[i] - shift_dq + (-mid_min);
if (right_edge[i] + shift_dq - (-mid_min) < dqs_margin)
dqs_margin = right_edge[i] + shift_dq - (-mid_min);
}
final_dqs = new_dqs;
if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS)
final_dqs_en = start_dqs_en - mid_min;
/* Move DQS-en */
if (IO_SHIFT_DQS_EN_WHEN_SHIFT_DQS) {
scc_mgr_set_dqs_en_delay(read_group, final_dqs_en);
scc_mgr_load_dqs(read_group);
}
/* Move DQS */
scc_mgr_set_dqs_bus_in_delay(read_group, final_dqs);
scc_mgr_load_dqs(read_group);
debug_cond(DLEVEL == 2, "%s:%d vfifo_center: dq_margin=%d \
dqs_margin=%d", __func__, __LINE__,
dq_margin, dqs_margin);
/*
* Do not remove this line as it makes sure all of our decisions
* have been applied. Apply the update bit.
*/
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
return (dq_margin >= 0) && (dqs_margin >= 0);
}
/*
* calibrate the read valid prediction FIFO.
*
* - read valid prediction will consist of finding a good DQS enable phase,
* DQS enable delay, DQS input phase, and DQS input delay.
* - we also do a per-bit deskew on the DQ lines.
*/
static uint32_t rw_mgr_mem_calibrate_vfifo(uint32_t read_group,
uint32_t test_bgn)
{
uint32_t p, d, rank_bgn, sr;
uint32_t dtaps_per_ptap;
uint32_t tmp_delay;
uint32_t bit_chk;
uint32_t grp_calibrated;
uint32_t write_group, write_test_bgn;
uint32_t failed_substage;
debug("%s:%d: %u %u\n", __func__, __LINE__, read_group, test_bgn);
/* update info for sims */
reg_file_set_stage(CAL_STAGE_VFIFO);
write_group = read_group;
write_test_bgn = test_bgn;
/* USER Determine number of delay taps for each phase tap */
dtaps_per_ptap = 0;
tmp_delay = 0;
while (tmp_delay < IO_DELAY_PER_OPA_TAP) {
dtaps_per_ptap++;
tmp_delay += IO_DELAY_PER_DQS_EN_DCHAIN_TAP;
}
dtaps_per_ptap--;
tmp_delay = 0;
/* update info for sims */
reg_file_set_group(read_group);
grp_calibrated = 0;
reg_file_set_sub_stage(CAL_SUBSTAGE_GUARANTEED_READ);
failed_substage = CAL_SUBSTAGE_GUARANTEED_READ;
for (d = 0; d <= dtaps_per_ptap && grp_calibrated == 0; d += 2) {
/*
* In RLDRAMX we may be messing the delay of pins in
* the same write group but outside of the current read
* the group, but that's ok because we haven't
* calibrated output side yet.
*/
if (d > 0) {
scc_mgr_apply_group_all_out_delay_add_all_ranks
(write_group, write_test_bgn, d);
}
for (p = 0; p <= IO_DQDQS_OUT_PHASE_MAX && grp_calibrated == 0;
p++) {
/* set a particular dqdqs phase */
scc_mgr_set_dqdqs_output_phase_all_ranks(read_group, p);
debug_cond(DLEVEL == 1, "%s:%d calibrate_vfifo: g=%u \
p=%u d=%u\n", __func__, __LINE__,
read_group, p, d);
/*
* Load up the patterns used by read calibration
* using current DQDQS phase.
*/
rw_mgr_mem_calibrate_read_load_patterns(0, 1);
if (!(gbl->phy_debug_mode_flags &
PHY_DEBUG_DISABLE_GUARANTEED_READ)) {
if (!rw_mgr_mem_calibrate_read_test_patterns_all_ranks
(read_group, 1, &bit_chk)) {
debug_cond(DLEVEL == 1, "%s:%d Guaranteed read test failed:",
__func__, __LINE__);
debug_cond(DLEVEL == 1, " g=%u p=%u d=%u\n",
read_group, p, d);
break;
}
}
/* case:56390 */
grp_calibrated = 1;
if (rw_mgr_mem_calibrate_vfifo_find_dqs_en_phase_sweep_dq_in_delay
(write_group, read_group, test_bgn)) {
/*
* USER Read per-bit deskew can be done on a
* per shadow register basis.
*/
for (rank_bgn = 0, sr = 0;
rank_bgn < RW_MGR_MEM_NUMBER_OF_RANKS;
rank_bgn += NUM_RANKS_PER_SHADOW_REG,
++sr) {
/*
* Determine if this set of ranks
* should be skipped entirely.
*/
if (!param->skip_shadow_regs[sr]) {
/*
* If doing read after write
* calibration, do not update
* FOM, now - do it then.
*/
if (!rw_mgr_mem_calibrate_vfifo_center
(rank_bgn, write_group,
read_group, test_bgn, 1, 0)) {
grp_calibrated = 0;
failed_substage =
CAL_SUBSTAGE_VFIFO_CENTER;
}
}
}
} else {
grp_calibrated = 0;
failed_substage = CAL_SUBSTAGE_DQS_EN_PHASE;
}
}
}
if (grp_calibrated == 0) {
set_failing_group_stage(write_group, CAL_STAGE_VFIFO,
failed_substage);
return 0;
}
/*
* Reset the delay chains back to zero if they have moved > 1
* (check for > 1 because loop will increase d even when pass in
* first case).
*/
if (d > 2)
scc_mgr_zero_group(write_group, write_test_bgn, 1);
return 1;
}
/* VFIFO Calibration -- Read Deskew Calibration after write deskew */
static uint32_t rw_mgr_mem_calibrate_vfifo_end(uint32_t read_group,
uint32_t test_bgn)
{
uint32_t rank_bgn, sr;
uint32_t grp_calibrated;
uint32_t write_group;
debug("%s:%d %u %u", __func__, __LINE__, read_group, test_bgn);
/* update info for sims */
reg_file_set_stage(CAL_STAGE_VFIFO_AFTER_WRITES);
reg_file_set_sub_stage(CAL_SUBSTAGE_VFIFO_CENTER);
write_group = read_group;
/* update info for sims */
reg_file_set_group(read_group);
grp_calibrated = 1;
/* Read per-bit deskew can be done on a per shadow register basis */
for (rank_bgn = 0, sr = 0; rank_bgn < RW_MGR_MEM_NUMBER_OF_RANKS;
rank_bgn += NUM_RANKS_PER_SHADOW_REG, ++sr) {
/* Determine if this set of ranks should be skipped entirely */
if (!param->skip_shadow_regs[sr]) {
/* This is the last calibration round, update FOM here */
if (!rw_mgr_mem_calibrate_vfifo_center(rank_bgn,
write_group,
read_group,
test_bgn, 0,
1)) {
grp_calibrated = 0;
}
}
}
if (grp_calibrated == 0) {
set_failing_group_stage(write_group,
CAL_STAGE_VFIFO_AFTER_WRITES,
CAL_SUBSTAGE_VFIFO_CENTER);
return 0;
}
return 1;
}
/* Calibrate LFIFO to find smallest read latency */
static uint32_t rw_mgr_mem_calibrate_lfifo(void)
{
uint32_t found_one;
uint32_t bit_chk;
uint32_t addr;
debug("%s:%d\n", __func__, __LINE__);
/* update info for sims */
reg_file_set_stage(CAL_STAGE_LFIFO);
reg_file_set_sub_stage(CAL_SUBSTAGE_READ_LATENCY);
/* Load up the patterns used by read calibration for all ranks */
rw_mgr_mem_calibrate_read_load_patterns(0, 1);
found_one = 0;
addr = sdr_get_addr(&phy_mgr_cfg->phy_rlat);
do {
writel(gbl->curr_read_lat, SOCFPGA_SDR_ADDRESS + addr);
debug_cond(DLEVEL == 2, "%s:%d lfifo: read_lat=%u",
__func__, __LINE__, gbl->curr_read_lat);
if (!rw_mgr_mem_calibrate_read_test_all_ranks(0,
NUM_READ_TESTS,
PASS_ALL_BITS,
&bit_chk, 1)) {
break;
}
found_one = 1;
/* reduce read latency and see if things are working */
/* correctly */
gbl->curr_read_lat--;
} while (gbl->curr_read_lat > 0);
/* reset the fifos to get pointers to known state */
addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
if (found_one) {
/* add a fudge factor to the read latency that was determined */
gbl->curr_read_lat += 2;
addr = sdr_get_addr(&phy_mgr_cfg->phy_rlat);
writel(gbl->curr_read_lat, SOCFPGA_SDR_ADDRESS + addr);
debug_cond(DLEVEL == 2, "%s:%d lfifo: success: using \
read_lat=%u\n", __func__, __LINE__,
gbl->curr_read_lat);
return 1;
} else {
set_failing_group_stage(0xff, CAL_STAGE_LFIFO,
CAL_SUBSTAGE_READ_LATENCY);
debug_cond(DLEVEL == 2, "%s:%d lfifo: failed at initial \
read_lat=%u\n", __func__, __LINE__,
gbl->curr_read_lat);
return 0;
}
}
/*
* issue write test command.
* two variants are provided. one that just tests a write pattern and
* another that tests datamask functionality.
*/
static void rw_mgr_mem_calibrate_write_test_issue(uint32_t group,
uint32_t test_dm)
{
uint32_t mcc_instruction;
uint32_t quick_write_mode = (((STATIC_CALIB_STEPS) & CALIB_SKIP_WRITES) &&
ENABLE_SUPER_QUICK_CALIBRATION);
uint32_t rw_wl_nop_cycles;
uint32_t addr;
/*
* Set counter and jump addresses for the right
* number of NOP cycles.
* The number of supported NOP cycles can range from -1 to infinity
* Three different cases are handled:
*
* 1. For a number of NOP cycles greater than 0, the RW Mgr looping
* mechanism will be used to insert the right number of NOPs
*
* 2. For a number of NOP cycles equals to 0, the micro-instruction
* issuing the write command will jump straight to the
* micro-instruction that turns on DQS (for DDRx), or outputs write
* data (for RLD), skipping
* the NOP micro-instruction all together
*
* 3. A number of NOP cycles equal to -1 indicates that DQS must be
* turned on in the same micro-instruction that issues the write
* command. Then we need
* to directly jump to the micro-instruction that sends out the data
*
* NOTE: Implementing this mechanism uses 2 RW Mgr jump-counters
* (2 and 3). One jump-counter (0) is used to perform multiple
* write-read operations.
* one counter left to issue this command in "multiple-group" mode
*/
rw_wl_nop_cycles = gbl->rw_wl_nop_cycles;
if (rw_wl_nop_cycles == -1) {
/*
* CNTR 2 - We want to execute the special write operation that
* turns on DQS right away and then skip directly to the
* instruction that sends out the data. We set the counter to a
* large number so that the jump is always taken.
*/
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr2);
writel(0xFF, SOCFPGA_SDR_ADDRESS + addr);
/* CNTR 3 - Not used */
if (test_dm) {
mcc_instruction = RW_MGR_LFSR_WR_RD_DM_BANK_0_WL_1;
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add2);
writel(RW_MGR_LFSR_WR_RD_DM_BANK_0_DATA,
SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add3);
writel(RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP,
SOCFPGA_SDR_ADDRESS + addr);
} else {
mcc_instruction = RW_MGR_LFSR_WR_RD_BANK_0_WL_1;
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add2);
writel(RW_MGR_LFSR_WR_RD_BANK_0_DATA, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add3);
writel(RW_MGR_LFSR_WR_RD_BANK_0_NOP, SOCFPGA_SDR_ADDRESS + addr);
}
} else if (rw_wl_nop_cycles == 0) {
/*
* CNTR 2 - We want to skip the NOP operation and go straight
* to the DQS enable instruction. We set the counter to a large
* number so that the jump is always taken.
*/
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr2);
writel(0xFF, SOCFPGA_SDR_ADDRESS + addr);
/* CNTR 3 - Not used */
if (test_dm) {
mcc_instruction = RW_MGR_LFSR_WR_RD_DM_BANK_0;
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add2);
writel(RW_MGR_LFSR_WR_RD_DM_BANK_0_DQS,
SOCFPGA_SDR_ADDRESS + addr);
} else {
mcc_instruction = RW_MGR_LFSR_WR_RD_BANK_0;
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add2);
writel(RW_MGR_LFSR_WR_RD_BANK_0_DQS, SOCFPGA_SDR_ADDRESS + addr);
}
} else {
/*
* CNTR 2 - In this case we want to execute the next instruction
* and NOT take the jump. So we set the counter to 0. The jump
* address doesn't count.
*/
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr2);
writel(0x0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add2);
writel(0x0, SOCFPGA_SDR_ADDRESS + addr);
/*
* CNTR 3 - Set the nop counter to the number of cycles we
* need to loop for, minus 1.
*/
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr3);
writel(rw_wl_nop_cycles - 1, SOCFPGA_SDR_ADDRESS + addr);
if (test_dm) {
mcc_instruction = RW_MGR_LFSR_WR_RD_DM_BANK_0;
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add3);
writel(RW_MGR_LFSR_WR_RD_DM_BANK_0_NOP, SOCFPGA_SDR_ADDRESS + addr);
} else {
mcc_instruction = RW_MGR_LFSR_WR_RD_BANK_0;
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add3);
writel(RW_MGR_LFSR_WR_RD_BANK_0_NOP, SOCFPGA_SDR_ADDRESS + addr);
}
}
addr = sdr_get_addr((u32 *)RW_MGR_RESET_READ_DATAPATH);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr0);
if (quick_write_mode)
writel(0x08, SOCFPGA_SDR_ADDRESS + addr);
else
writel(0x40, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add0);
writel(mcc_instruction, SOCFPGA_SDR_ADDRESS + addr);
/*
* CNTR 1 - This is used to ensure enough time elapses
* for read data to come back.
*/
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr1);
writel(0x30, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add1);
if (test_dm) {
writel(RW_MGR_LFSR_WR_RD_DM_BANK_0_WAIT, SOCFPGA_SDR_ADDRESS + addr);
} else {
writel(RW_MGR_LFSR_WR_RD_BANK_0_WAIT, SOCFPGA_SDR_ADDRESS + addr);
}
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(mcc_instruction, SOCFPGA_SDR_ADDRESS + addr + (group << 2));
}
/* Test writes, can check for a single bit pass or multiple bit pass */
static uint32_t rw_mgr_mem_calibrate_write_test(uint32_t rank_bgn,
uint32_t write_group, uint32_t use_dm, uint32_t all_correct,
uint32_t *bit_chk, uint32_t all_ranks)
{
uint32_t addr;
uint32_t r;
uint32_t correct_mask_vg;
uint32_t tmp_bit_chk;
uint32_t vg;
uint32_t rank_end = all_ranks ? RW_MGR_MEM_NUMBER_OF_RANKS :
(rank_bgn + NUM_RANKS_PER_SHADOW_REG);
uint32_t addr_rw_mgr;
uint32_t base_rw_mgr;
*bit_chk = param->write_correct_mask;
correct_mask_vg = param->write_correct_mask_vg;
for (r = rank_bgn; r < rank_end; r++) {
if (param->skip_ranks[r]) {
/* request to skip the rank */
continue;
}
/* set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_READ_WRITE);
tmp_bit_chk = 0;
addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset);
addr_rw_mgr = sdr_get_addr((u32 *)BASE_RW_MGR);
for (vg = RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS-1; ; vg--) {
/* reset the fifos to get pointers to known state */
writel(0, SOCFPGA_SDR_ADDRESS + addr);
tmp_bit_chk = tmp_bit_chk <<
(RW_MGR_MEM_DQ_PER_WRITE_DQS /
RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS);
rw_mgr_mem_calibrate_write_test_issue(write_group *
RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS+vg,
use_dm);
base_rw_mgr = readl(SOCFPGA_SDR_ADDRESS + addr_rw_mgr);
tmp_bit_chk = tmp_bit_chk | (correct_mask_vg & ~(base_rw_mgr));
if (vg == 0)
break;
}
*bit_chk &= tmp_bit_chk;
}
if (all_correct) {
set_rank_and_odt_mask(0, RW_MGR_ODT_MODE_OFF);
debug_cond(DLEVEL == 2, "write_test(%u,%u,ALL) : %u == \
%u => %lu", write_group, use_dm,
*bit_chk, param->write_correct_mask,
(long unsigned int)(*bit_chk ==
param->write_correct_mask));
return *bit_chk == param->write_correct_mask;
} else {
set_rank_and_odt_mask(0, RW_MGR_ODT_MODE_OFF);
debug_cond(DLEVEL == 2, "write_test(%u,%u,ONE) : %u != ",
write_group, use_dm, *bit_chk);
debug_cond(DLEVEL == 2, "%lu" " => %lu", (long unsigned int)0,
(long unsigned int)(*bit_chk != 0));
return *bit_chk != 0x00;
}
}
/*
* center all windows. do per-bit-deskew to possibly increase size of
* certain windows.
*/
static uint32_t rw_mgr_mem_calibrate_writes_center(uint32_t rank_bgn,
uint32_t write_group, uint32_t test_bgn)
{
uint32_t i, p, min_index;
int32_t d;
/*
* Store these as signed since there are comparisons with
* signed numbers.
*/
uint32_t bit_chk;
uint32_t sticky_bit_chk;
int32_t left_edge[RW_MGR_MEM_DQ_PER_WRITE_DQS];
int32_t right_edge[RW_MGR_MEM_DQ_PER_WRITE_DQS];
int32_t mid;
int32_t mid_min, orig_mid_min;
int32_t new_dqs, start_dqs, shift_dq;
int32_t dq_margin, dqs_margin, dm_margin;
uint32_t stop;
uint32_t temp_dq_out1_delay;
uint32_t addr;
debug("%s:%d %u %u", __func__, __LINE__, write_group, test_bgn);
dm_margin = 0;
addr = sdr_get_addr((u32 *)SCC_MGR_IO_OUT1_DELAY);
start_dqs = readl(SOCFPGA_SDR_ADDRESS + addr +
(RW_MGR_MEM_DQ_PER_WRITE_DQS << 2));
/* per-bit deskew */
/*
* set the left and right edge of each bit to an illegal value
* use (IO_IO_OUT1_DELAY_MAX + 1) as an illegal value.
*/
sticky_bit_chk = 0;
for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
left_edge[i] = IO_IO_OUT1_DELAY_MAX + 1;
right_edge[i] = IO_IO_OUT1_DELAY_MAX + 1;
}
/* Search for the left edge of the window for each bit */
addr = sdr_get_addr(&sdr_scc_mgr->update);
for (d = 0; d <= IO_IO_OUT1_DELAY_MAX; d++) {
scc_mgr_apply_group_dq_out1_delay(write_group, test_bgn, d);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/*
* Stop searching when the read test doesn't pass AND when
* we've seen a passing read on every bit.
*/
stop = !rw_mgr_mem_calibrate_write_test(rank_bgn, write_group,
0, PASS_ONE_BIT, &bit_chk, 0);
sticky_bit_chk = sticky_bit_chk | bit_chk;
stop = stop && (sticky_bit_chk == param->write_correct_mask);
debug_cond(DLEVEL == 2, "write_center(left): dtap=%d => %u \
== %u && %u [bit_chk= %u ]\n",
d, sticky_bit_chk, param->write_correct_mask,
stop, bit_chk);
if (stop == 1) {
break;
} else {
for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
if (bit_chk & 1) {
/*
* Remember a passing test as the
* left_edge.
*/
left_edge[i] = d;
} else {
/*
* If a left edge has not been seen
* yet, then a future passing test will
* mark this edge as the right edge.
*/
if (left_edge[i] ==
IO_IO_OUT1_DELAY_MAX + 1) {
right_edge[i] = -(d + 1);
}
}
debug_cond(DLEVEL == 2, "write_center[l,d=%d):", d);
debug_cond(DLEVEL == 2, "bit_chk_test=%d left_edge[%u]: %d",
(int)(bit_chk & 1), i, left_edge[i]);
debug_cond(DLEVEL == 2, "right_edge[%u]: %d\n", i,
right_edge[i]);
bit_chk = bit_chk >> 1;
}
}
}
/* Reset DQ delay chains to 0 */
scc_mgr_apply_group_dq_out1_delay(write_group, test_bgn, 0);
sticky_bit_chk = 0;
for (i = RW_MGR_MEM_DQ_PER_WRITE_DQS - 1;; i--) {
debug_cond(DLEVEL == 2, "%s:%d write_center: left_edge[%u]: \
%d right_edge[%u]: %d\n", __func__, __LINE__,
i, left_edge[i], i, right_edge[i]);
/*
* Check for cases where we haven't found the left edge,
* which makes our assignment of the the right edge invalid.
* Reset it to the illegal value.
*/
if ((left_edge[i] == IO_IO_OUT1_DELAY_MAX + 1) &&
(right_edge[i] != IO_IO_OUT1_DELAY_MAX + 1)) {
right_edge[i] = IO_IO_OUT1_DELAY_MAX + 1;
debug_cond(DLEVEL == 2, "%s:%d write_center: reset \
right_edge[%u]: %d\n", __func__, __LINE__,
i, right_edge[i]);
}
/*
* Reset sticky bit (except for bits where we have
* seen the left edge).
*/
sticky_bit_chk = sticky_bit_chk << 1;
if ((left_edge[i] != IO_IO_OUT1_DELAY_MAX + 1))
sticky_bit_chk = sticky_bit_chk | 1;
if (i == 0)
break;
}
/* Search for the right edge of the window for each bit */
addr = sdr_get_addr(&sdr_scc_mgr->update);
for (d = 0; d <= IO_IO_OUT1_DELAY_MAX - start_dqs; d++) {
scc_mgr_apply_group_dqs_io_and_oct_out1(write_group,
d + start_dqs);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/*
* Stop searching when the read test doesn't pass AND when
* we've seen a passing read on every bit.
*/
stop = !rw_mgr_mem_calibrate_write_test(rank_bgn, write_group,
0, PASS_ONE_BIT, &bit_chk, 0);
sticky_bit_chk = sticky_bit_chk | bit_chk;
stop = stop && (sticky_bit_chk == param->write_correct_mask);
debug_cond(DLEVEL == 2, "write_center (right): dtap=%u => %u == \
%u && %u\n", d, sticky_bit_chk,
param->write_correct_mask, stop);
if (stop == 1) {
if (d == 0) {
for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS;
i++) {
/* d = 0 failed, but it passed when
testing the left edge, so it must be
marginal, set it to -1 */
if (right_edge[i] ==
IO_IO_OUT1_DELAY_MAX + 1 &&
left_edge[i] !=
IO_IO_OUT1_DELAY_MAX + 1) {
right_edge[i] = -1;
}
}
}
break;
} else {
for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
if (bit_chk & 1) {
/*
* Remember a passing test as
* the right_edge.
*/
right_edge[i] = d;
} else {
if (d != 0) {
/*
* If a right edge has not
* been seen yet, then a future
* passing test will mark this
* edge as the left edge.
*/
if (right_edge[i] ==
IO_IO_OUT1_DELAY_MAX + 1)
left_edge[i] = -(d + 1);
} else {
/*
* d = 0 failed, but it passed
* when testing the left edge,
* so it must be marginal, set
* it to -1.
*/
if (right_edge[i] ==
IO_IO_OUT1_DELAY_MAX + 1 &&
left_edge[i] !=
IO_IO_OUT1_DELAY_MAX + 1)
right_edge[i] = -1;
/*
* If a right edge has not been
* seen yet, then a future
* passing test will mark this
* edge as the left edge.
*/
else if (right_edge[i] ==
IO_IO_OUT1_DELAY_MAX +
1)
left_edge[i] = -(d + 1);
}
}
debug_cond(DLEVEL == 2, "write_center[r,d=%d):", d);
debug_cond(DLEVEL == 2, "bit_chk_test=%d left_edge[%u]: %d",
(int)(bit_chk & 1), i, left_edge[i]);
debug_cond(DLEVEL == 2, "right_edge[%u]: %d\n", i,
right_edge[i]);
bit_chk = bit_chk >> 1;
}
}
}
/* Check that all bits have a window */
for (i = 0; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
debug_cond(DLEVEL == 2, "%s:%d write_center: left_edge[%u]: \
%d right_edge[%u]: %d", __func__, __LINE__,
i, left_edge[i], i, right_edge[i]);
if ((left_edge[i] == IO_IO_OUT1_DELAY_MAX + 1) ||
(right_edge[i] == IO_IO_OUT1_DELAY_MAX + 1)) {
set_failing_group_stage(test_bgn + i,
CAL_STAGE_WRITES,
CAL_SUBSTAGE_WRITES_CENTER);
return 0;
}
}
/* Find middle of window for each DQ bit */
mid_min = left_edge[0] - right_edge[0];
min_index = 0;
for (i = 1; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++) {
mid = left_edge[i] - right_edge[i];
if (mid < mid_min) {
mid_min = mid;
min_index = i;
}
}
/*
* -mid_min/2 represents the amount that we need to move DQS.
* If mid_min is odd and positive we'll need to add one to
* make sure the rounding in further calculations is correct
* (always bias to the right), so just add 1 for all positive values.
*/
if (mid_min > 0)
mid_min++;
mid_min = mid_min / 2;
debug_cond(DLEVEL == 1, "%s:%d write_center: mid_min=%d\n", __func__,
__LINE__, mid_min);
/* Determine the amount we can change DQS (which is -mid_min) */
orig_mid_min = mid_min;
new_dqs = start_dqs;
mid_min = 0;
debug_cond(DLEVEL == 1, "%s:%d write_center: start_dqs=%d new_dqs=%d \
mid_min=%d\n", __func__, __LINE__, start_dqs, new_dqs, mid_min);
/* Initialize data for export structures */
dqs_margin = IO_IO_OUT1_DELAY_MAX + 1;
dq_margin = IO_IO_OUT1_DELAY_MAX + 1;
/* add delay to bring centre of all DQ windows to the same "level" */
addr = sdr_get_addr((u32 *)SCC_MGR_IO_OUT1_DELAY);
for (i = 0, p = test_bgn; i < RW_MGR_MEM_DQ_PER_WRITE_DQS; i++, p++) {
/* Use values before divide by 2 to reduce round off error */
shift_dq = (left_edge[i] - right_edge[i] -
(left_edge[min_index] - right_edge[min_index]))/2 +
(orig_mid_min - mid_min);
debug_cond(DLEVEL == 2, "%s:%d write_center: before: shift_dq \
[%u]=%d\n", __func__, __LINE__, i, shift_dq);
temp_dq_out1_delay = readl(SOCFPGA_SDR_ADDRESS + addr + (i << 2));
if (shift_dq + (int32_t)temp_dq_out1_delay >
(int32_t)IO_IO_OUT1_DELAY_MAX) {
shift_dq = (int32_t)IO_IO_OUT1_DELAY_MAX - temp_dq_out1_delay;
} else if (shift_dq + (int32_t)temp_dq_out1_delay < 0) {
shift_dq = -(int32_t)temp_dq_out1_delay;
}
debug_cond(DLEVEL == 2, "write_center: after: shift_dq[%u]=%d\n",
i, shift_dq);
scc_mgr_set_dq_out1_delay(write_group, i, temp_dq_out1_delay +
shift_dq);
scc_mgr_load_dq(i);
debug_cond(DLEVEL == 2, "write_center: margin[%u]=[%d,%d]\n", i,
left_edge[i] - shift_dq + (-mid_min),
right_edge[i] + shift_dq - (-mid_min));
/* To determine values for export structures */
if (left_edge[i] - shift_dq + (-mid_min) < dq_margin)
dq_margin = left_edge[i] - shift_dq + (-mid_min);
if (right_edge[i] + shift_dq - (-mid_min) < dqs_margin)
dqs_margin = right_edge[i] + shift_dq - (-mid_min);
}
/* Move DQS */
scc_mgr_apply_group_dqs_io_and_oct_out1(write_group, new_dqs);
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/* Centre DM */
debug_cond(DLEVEL == 2, "%s:%d write_center: DM\n", __func__, __LINE__);
/*
* set the left and right edge of each bit to an illegal value,
* use (IO_IO_OUT1_DELAY_MAX + 1) as an illegal value,
*/
left_edge[0] = IO_IO_OUT1_DELAY_MAX + 1;
right_edge[0] = IO_IO_OUT1_DELAY_MAX + 1;
int32_t bgn_curr = IO_IO_OUT1_DELAY_MAX + 1;
int32_t end_curr = IO_IO_OUT1_DELAY_MAX + 1;
int32_t bgn_best = IO_IO_OUT1_DELAY_MAX + 1;
int32_t end_best = IO_IO_OUT1_DELAY_MAX + 1;
int32_t win_best = 0;
/* Search for the/part of the window with DM shift */
addr = sdr_get_addr(&sdr_scc_mgr->update);
for (d = IO_IO_OUT1_DELAY_MAX; d >= 0; d -= DELTA_D) {
scc_mgr_apply_group_dm_out1_delay(write_group, d);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
if (rw_mgr_mem_calibrate_write_test(rank_bgn, write_group, 1,
PASS_ALL_BITS, &bit_chk,
0)) {
/* USE Set current end of the window */
end_curr = -d;
/*
* If a starting edge of our window has not been seen
* this is our current start of the DM window.
*/
if (bgn_curr == IO_IO_OUT1_DELAY_MAX + 1)
bgn_curr = -d;
/*
* If current window is bigger than best seen.
* Set best seen to be current window.
*/
if ((end_curr-bgn_curr+1) > win_best) {
win_best = end_curr-bgn_curr+1;
bgn_best = bgn_curr;
end_best = end_curr;
}
} else {
/* We just saw a failing test. Reset temp edge */
bgn_curr = IO_IO_OUT1_DELAY_MAX + 1;
end_curr = IO_IO_OUT1_DELAY_MAX + 1;
}
}
/* Reset DM delay chains to 0 */
scc_mgr_apply_group_dm_out1_delay(write_group, 0);
/*
* Check to see if the current window nudges up aganist 0 delay.
* If so we need to continue the search by shifting DQS otherwise DQS
* search begins as a new search. */
if (end_curr != 0) {
bgn_curr = IO_IO_OUT1_DELAY_MAX + 1;
end_curr = IO_IO_OUT1_DELAY_MAX + 1;
}
/* Search for the/part of the window with DQS shifts */
addr = sdr_get_addr(&sdr_scc_mgr->update);
for (d = 0; d <= IO_IO_OUT1_DELAY_MAX - new_dqs; d += DELTA_D) {
/*
* Note: This only shifts DQS, so are we limiting ourselve to
* width of DQ unnecessarily.
*/
scc_mgr_apply_group_dqs_io_and_oct_out1(write_group,
d + new_dqs);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
if (rw_mgr_mem_calibrate_write_test(rank_bgn, write_group, 1,
PASS_ALL_BITS, &bit_chk,
0)) {
/* USE Set current end of the window */
end_curr = d;
/*
* If a beginning edge of our window has not been seen
* this is our current begin of the DM window.
*/
if (bgn_curr == IO_IO_OUT1_DELAY_MAX + 1)
bgn_curr = d;
/*
* If current window is bigger than best seen. Set best
* seen to be current window.
*/
if ((end_curr-bgn_curr+1) > win_best) {
win_best = end_curr-bgn_curr+1;
bgn_best = bgn_curr;
end_best = end_curr;
}
} else {
/* We just saw a failing test. Reset temp edge */
bgn_curr = IO_IO_OUT1_DELAY_MAX + 1;
end_curr = IO_IO_OUT1_DELAY_MAX + 1;
/* Early exit optimization: if ther remaining delay
chain space is less than already seen largest window
we can exit */
if ((win_best-1) >
(IO_IO_OUT1_DELAY_MAX - new_dqs - d)) {
break;
}
}
}
/* assign left and right edge for cal and reporting; */
left_edge[0] = -1*bgn_best;
right_edge[0] = end_best;
debug_cond(DLEVEL == 2, "%s:%d dm_calib: left=%d right=%d\n", __func__,
__LINE__, left_edge[0], right_edge[0]);
/* Move DQS (back to orig) */
scc_mgr_apply_group_dqs_io_and_oct_out1(write_group, new_dqs);
/* Move DM */
/* Find middle of window for the DM bit */
mid = (left_edge[0] - right_edge[0]) / 2;
/* only move right, since we are not moving DQS/DQ */
if (mid < 0)
mid = 0;
/* dm_marign should fail if we never find a window */
if (win_best == 0)
dm_margin = -1;
else
dm_margin = left_edge[0] - mid;
scc_mgr_apply_group_dm_out1_delay(write_group, mid);
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
debug_cond(DLEVEL == 2, "%s:%d dm_calib: left=%d right=%d mid=%d \
dm_margin=%d\n", __func__, __LINE__, left_edge[0],
right_edge[0], mid, dm_margin);
/* Export values */
gbl->fom_out += dq_margin + dqs_margin;
debug_cond(DLEVEL == 2, "%s:%d write_center: dq_margin=%d \
dqs_margin=%d dm_margin=%d\n", __func__, __LINE__,
dq_margin, dqs_margin, dm_margin);
/*
* Do not remove this line as it makes sure all of our
* decisions have been applied.
*/
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
return (dq_margin >= 0) && (dqs_margin >= 0) && (dm_margin >= 0);
}
/* calibrate the write operations */
static uint32_t rw_mgr_mem_calibrate_writes(uint32_t rank_bgn, uint32_t g,
uint32_t test_bgn)
{
/* update info for sims */
debug("%s:%d %u %u\n", __func__, __LINE__, g, test_bgn);
reg_file_set_stage(CAL_STAGE_WRITES);
reg_file_set_sub_stage(CAL_SUBSTAGE_WRITES_CENTER);
reg_file_set_group(g);
if (!rw_mgr_mem_calibrate_writes_center(rank_bgn, g, test_bgn)) {
set_failing_group_stage(g, CAL_STAGE_WRITES,
CAL_SUBSTAGE_WRITES_CENTER);
return 0;
}
return 1;
}
/* precharge all banks and activate row 0 in bank "000..." and bank "111..." */
static void mem_precharge_and_activate(void)
{
uint32_t r;
uint32_t addr;
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS; r++) {
if (param->skip_ranks[r]) {
/* request to skip the rank */
continue;
}
/* set rank */
set_rank_and_odt_mask(r, RW_MGR_ODT_MODE_OFF);
/* precharge all banks ... */
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_PRECHARGE_ALL, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr0);
writel(0x0F, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add0);
writel(RW_MGR_ACTIVATE_0_AND_1_WAIT1, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_mgr_regs->load_cntr1);
writel(0x0F, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_rw_load_jump_mgr_regs->load_jump_add1);
writel(RW_MGR_ACTIVATE_0_AND_1_WAIT2, SOCFPGA_SDR_ADDRESS + addr);
/* activate rows */
addr = sdr_get_addr((u32 *)RW_MGR_RUN_SINGLE_GROUP);
writel(RW_MGR_ACTIVATE_0_AND_1, SOCFPGA_SDR_ADDRESS + addr);
}
}
/* Configure various memory related parameters. */
static void mem_config(void)
{
uint32_t rlat, wlat;
uint32_t rw_wl_nop_cycles;
uint32_t max_latency;
uint32_t addr;
debug("%s:%d\n", __func__, __LINE__);
/* read in write and read latency */
addr = sdr_get_addr(&data_mgr->t_wl_add);
wlat = readl(SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&data_mgr->mem_t_add);
wlat += readl(SOCFPGA_SDR_ADDRESS + addr);
/* WL for hard phy does not include additive latency */
/*
* add addtional write latency to offset the address/command extra
* clock cycle. We change the AC mux setting causing AC to be delayed
* by one mem clock cycle. Only do this for DDR3
*/
wlat = wlat + 1;
addr = sdr_get_addr(&data_mgr->t_rl_add);
rlat = readl(SOCFPGA_SDR_ADDRESS + addr);
rw_wl_nop_cycles = wlat - 2;
gbl->rw_wl_nop_cycles = rw_wl_nop_cycles;
/*
* For AV/CV, lfifo is hardened and always runs at full rate so
* max latency in AFI clocks, used here, is correspondingly smaller.
*/
max_latency = (1<<MAX_LATENCY_COUNT_WIDTH)/1 - 1;
/* configure for a burst length of 8 */
/* write latency */
/* Adjust Write Latency for Hard PHY */
wlat = wlat + 1;
/* set a pretty high read latency initially */
gbl->curr_read_lat = rlat + 16;
if (gbl->curr_read_lat > max_latency)
gbl->curr_read_lat = max_latency;
addr = sdr_get_addr(&phy_mgr_cfg->phy_rlat);
writel(gbl->curr_read_lat, SOCFPGA_SDR_ADDRESS + addr);
/* advertise write latency */
gbl->curr_write_lat = wlat;
addr = sdr_get_addr(&phy_mgr_cfg->afi_wlat);
writel(wlat - 2, SOCFPGA_SDR_ADDRESS + addr);
/* initialize bit slips */
mem_precharge_and_activate();
}
/* Set VFIFO and LFIFO to instant-on settings in skip calibration mode */
static void mem_skip_calibrate(void)
{
uint32_t vfifo_offset;
uint32_t i, j, r;
uint32_t addr;
debug("%s:%d\n", __func__, __LINE__);
/* Need to update every shadow register set used by the interface */
for (r = 0; r < RW_MGR_MEM_NUMBER_OF_RANKS;
r += NUM_RANKS_PER_SHADOW_REG) {
/*
* Set output phase alignment settings appropriate for
* skip calibration.
*/
for (i = 0; i < RW_MGR_MEM_IF_READ_DQS_WIDTH; i++) {
scc_mgr_set_dqs_en_phase(i, 0);
#if IO_DLL_CHAIN_LENGTH == 6
scc_mgr_set_dqdqs_output_phase(i, 6);
#else
scc_mgr_set_dqdqs_output_phase(i, 7);
#endif
/*
* Case:33398
*
* Write data arrives to the I/O two cycles before write
* latency is reached (720 deg).
* -> due to bit-slip in a/c bus
* -> to allow board skew where dqs is longer than ck
* -> how often can this happen!?
* -> can claim back some ptaps for high freq
* support if we can relax this, but i digress...
*
* The write_clk leads mem_ck by 90 deg
* The minimum ptap of the OPA is 180 deg
* Each ptap has (360 / IO_DLL_CHAIN_LENGH) deg of delay
* The write_clk is always delayed by 2 ptaps
*
* Hence, to make DQS aligned to CK, we need to delay
* DQS by:
* (720 - 90 - 180 - 2 * (360 / IO_DLL_CHAIN_LENGTH))
*
* Dividing the above by (360 / IO_DLL_CHAIN_LENGTH)
* gives us the number of ptaps, which simplies to:
*
* (1.25 * IO_DLL_CHAIN_LENGTH - 2)
*/
scc_mgr_set_dqdqs_output_phase(i, (1.25 *
IO_DLL_CHAIN_LENGTH - 2));
}
addr = sdr_get_addr(&sdr_scc_mgr->dqs_ena);
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_scc_mgr->dqs_io_ena);
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr((u32 *)SCC_MGR_GROUP_COUNTER);
for (i = 0; i < RW_MGR_MEM_IF_WRITE_DQS_WIDTH; i++) {
writel(i, SOCFPGA_SDR_ADDRESS + addr);
}
addr = sdr_get_addr(&sdr_scc_mgr->dq_ena);
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_scc_mgr->dm_ena);
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
/* Compensate for simulation model behaviour */
for (i = 0; i < RW_MGR_MEM_IF_READ_DQS_WIDTH; i++) {
scc_mgr_set_dqs_bus_in_delay(i, 10);
scc_mgr_load_dqs(i);
}
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/*
* ArriaV has hard FIFOs that can only be initialized by incrementing
* in sequencer.
*/
vfifo_offset = CALIB_VFIFO_OFFSET;
addr = sdr_get_addr(&phy_mgr_cmd->inc_vfifo_hard_phy);
for (j = 0; j < vfifo_offset; j++) {
writel(0xff, SOCFPGA_SDR_ADDRESS + addr);
}
addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/*
* For ACV with hard lfifo, we get the skip-cal setting from
* generation-time constant.
*/
gbl->curr_read_lat = CALIB_LFIFO_OFFSET;
addr = sdr_get_addr(&phy_mgr_cfg->phy_rlat);
writel(gbl->curr_read_lat, SOCFPGA_SDR_ADDRESS + addr);
}
/* Memory calibration entry point */
static uint32_t mem_calibrate(void)
{
uint32_t i;
uint32_t rank_bgn, sr;
uint32_t write_group, write_test_bgn;
uint32_t read_group, read_test_bgn;
uint32_t run_groups, current_run;
uint32_t failing_groups = 0;
uint32_t group_failed = 0;
uint32_t sr_failed = 0;
uint32_t addr;
debug("%s:%d\n", __func__, __LINE__);
/* Initialize the data settings */
gbl->error_substage = CAL_SUBSTAGE_NIL;
gbl->error_stage = CAL_STAGE_NIL;
gbl->error_group = 0xff;
gbl->fom_in = 0;
gbl->fom_out = 0;
mem_config();
uint32_t bypass_mode = 0x1;
addr = sdr_get_addr((u32 *)SCC_MGR_GROUP_COUNTER);
for (i = 0; i < RW_MGR_MEM_IF_READ_DQS_WIDTH; i++) {
writel(i, SOCFPGA_SDR_ADDRESS + addr);
scc_set_bypass_mode(i, bypass_mode);
}
if ((dyn_calib_steps & CALIB_SKIP_ALL) == CALIB_SKIP_ALL) {
/*
* Set VFIFO and LFIFO to instant-on settings in skip
* calibration mode.
*/
mem_skip_calibrate();
} else {
for (i = 0; i < NUM_CALIB_REPEAT; i++) {
/*
* Zero all delay chain/phase settings for all
* groups and all shadow register sets.
*/
scc_mgr_zero_all();
run_groups = ~param->skip_groups;
for (write_group = 0, write_test_bgn = 0; write_group
< RW_MGR_MEM_IF_WRITE_DQS_WIDTH; write_group++,
write_test_bgn += RW_MGR_MEM_DQ_PER_WRITE_DQS) {
/* Initialized the group failure */
group_failed = 0;
current_run = run_groups & ((1 <<
RW_MGR_NUM_DQS_PER_WRITE_GROUP) - 1);
run_groups = run_groups >>
RW_MGR_NUM_DQS_PER_WRITE_GROUP;
if (current_run == 0)
continue;
addr = sdr_get_addr((u32 *)SCC_MGR_GROUP_COUNTER);
writel(write_group, SOCFPGA_SDR_ADDRESS + addr);
scc_mgr_zero_group(write_group, write_test_bgn,
0);
for (read_group = write_group *
RW_MGR_MEM_IF_READ_DQS_WIDTH /
RW_MGR_MEM_IF_WRITE_DQS_WIDTH,
read_test_bgn = 0;
read_group < (write_group + 1) *
RW_MGR_MEM_IF_READ_DQS_WIDTH /
RW_MGR_MEM_IF_WRITE_DQS_WIDTH &&
group_failed == 0;
read_group++, read_test_bgn +=
RW_MGR_MEM_DQ_PER_READ_DQS) {
/* Calibrate the VFIFO */
if (!((STATIC_CALIB_STEPS) &
CALIB_SKIP_VFIFO)) {
if (!rw_mgr_mem_calibrate_vfifo
(read_group,
read_test_bgn)) {
group_failed = 1;
if (!(gbl->
phy_debug_mode_flags &
PHY_DEBUG_SWEEP_ALL_GROUPS)) {
return 0;
}
}
}
}
/* Calibrate the output side */
if (group_failed == 0) {
for (rank_bgn = 0, sr = 0; rank_bgn
< RW_MGR_MEM_NUMBER_OF_RANKS;
rank_bgn +=
NUM_RANKS_PER_SHADOW_REG,
++sr) {
sr_failed = 0;
if (!((STATIC_CALIB_STEPS) &
CALIB_SKIP_WRITES)) {
if ((STATIC_CALIB_STEPS)
& CALIB_SKIP_DELAY_SWEEPS) {
/* not needed in quick mode! */
} else {
/*
* Determine if this set of
* ranks should be skipped
* entirely.
*/
if (!param->skip_shadow_regs[sr]) {
if (!rw_mgr_mem_calibrate_writes
(rank_bgn, write_group,
write_test_bgn)) {
sr_failed = 1;
if (!(gbl->
phy_debug_mode_flags &
PHY_DEBUG_SWEEP_ALL_GROUPS)) {
return 0;
}
}
}
}
}
if (sr_failed != 0)
group_failed = 1;
}
}
if (group_failed == 0) {
for (read_group = write_group *
RW_MGR_MEM_IF_READ_DQS_WIDTH /
RW_MGR_MEM_IF_WRITE_DQS_WIDTH,
read_test_bgn = 0;
read_group < (write_group + 1)
* RW_MGR_MEM_IF_READ_DQS_WIDTH
/ RW_MGR_MEM_IF_WRITE_DQS_WIDTH &&
group_failed == 0;
read_group++, read_test_bgn +=
RW_MGR_MEM_DQ_PER_READ_DQS) {
if (!((STATIC_CALIB_STEPS) &
CALIB_SKIP_WRITES)) {
if (!rw_mgr_mem_calibrate_vfifo_end
(read_group, read_test_bgn)) {
group_failed = 1;
if (!(gbl->phy_debug_mode_flags
& PHY_DEBUG_SWEEP_ALL_GROUPS)) {
return 0;
}
}
}
}
}
if (group_failed != 0)
failing_groups++;
}
/*
* USER If there are any failing groups then report
* the failure.
*/
if (failing_groups != 0)
return 0;
/* Calibrate the LFIFO */
if (!((STATIC_CALIB_STEPS) & CALIB_SKIP_LFIFO)) {
/*
* If we're skipping groups as part of debug,
* don't calibrate LFIFO.
*/
if (param->skip_groups == 0) {
if (!rw_mgr_mem_calibrate_lfifo())
return 0;
}
}
}
}
/*
* Do not remove this line as it makes sure all of our decisions
* have been applied.
*/
addr = sdr_get_addr(&sdr_scc_mgr->update);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
return 1;
}
static uint32_t run_mem_calibrate(void)
{
uint32_t pass;
uint32_t debug_info;
uint32_t addr;
debug("%s:%d\n", __func__, __LINE__);
/* Reset pass/fail status shown on afi_cal_success/fail */
addr = sdr_get_addr(&phy_mgr_cfg->cal_status);
writel(PHY_MGR_CAL_RESET, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr((u32 *)BASE_MMR);
/* stop tracking manger */
uint32_t ctrlcfg = readl(SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr((u32 *)BASE_MMR);
writel(ctrlcfg & 0xFFBFFFFF, SOCFPGA_SDR_ADDRESS + addr);
initialize();
rw_mgr_mem_initialize();
pass = mem_calibrate();
mem_precharge_and_activate();
addr = sdr_get_addr(&phy_mgr_cmd->fifo_reset);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
/*
* Handoff:
* Don't return control of the PHY back to AFI when in debug mode.
*/
if ((gbl->phy_debug_mode_flags & PHY_DEBUG_IN_DEBUG_MODE) == 0) {
rw_mgr_mem_handoff();
/*
* In Hard PHY this is a 2-bit control:
* 0: AFI Mux Select
* 1: DDIO Mux Select
*/
addr = sdr_get_addr(&phy_mgr_cfg->mux_sel);
writel(0x2, SOCFPGA_SDR_ADDRESS + addr);
}
addr = sdr_get_addr((u32 *)BASE_MMR);
writel(ctrlcfg, SOCFPGA_SDR_ADDRESS + addr);
if (pass) {
printf("%s: CALIBRATION PASSED\n", __FILE__);
gbl->fom_in /= 2;
gbl->fom_out /= 2;
if (gbl->fom_in > 0xff)
gbl->fom_in = 0xff;
if (gbl->fom_out > 0xff)
gbl->fom_out = 0xff;
/* Update the FOM in the register file */
debug_info = gbl->fom_in;
debug_info |= gbl->fom_out << 8;
addr = sdr_get_addr(&sdr_reg_file->fom);
writel(debug_info, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&phy_mgr_cfg->cal_debug_info);
writel(debug_info, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&phy_mgr_cfg->cal_status);
writel(PHY_MGR_CAL_SUCCESS, SOCFPGA_SDR_ADDRESS + addr);
} else {
printf("%s: CALIBRATION FAILED\n", __FILE__);
debug_info = gbl->error_stage;
debug_info |= gbl->error_substage << 8;
debug_info |= gbl->error_group << 16;
addr = sdr_get_addr(&sdr_reg_file->failing_stage);
writel(debug_info, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&phy_mgr_cfg->cal_debug_info);
writel(debug_info, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&phy_mgr_cfg->cal_status);
writel(PHY_MGR_CAL_FAIL, SOCFPGA_SDR_ADDRESS + addr);
/* Update the failing group/stage in the register file */
debug_info = gbl->error_stage;
debug_info |= gbl->error_substage << 8;
debug_info |= gbl->error_group << 16;
addr = sdr_get_addr(&sdr_reg_file->failing_stage);
writel(debug_info, SOCFPGA_SDR_ADDRESS + addr);
}
return pass;
}
static void hc_initialize_rom_data(void)
{
uint32_t i;
uint32_t addr;
addr = sdr_get_addr((u32 *)(RW_MGR_INST_ROM_WRITE));
for (i = 0; i < ARRAY_SIZE(inst_rom_init); i++) {
uint32_t data = inst_rom_init[i];
writel(data, SOCFPGA_SDR_ADDRESS + addr + (i << 2));
}
addr = sdr_get_addr((u32 *)(RW_MGR_AC_ROM_WRITE));
for (i = 0; i < ARRAY_SIZE(ac_rom_init); i++) {
uint32_t data = ac_rom_init[i];
writel(data, SOCFPGA_SDR_ADDRESS + addr + (i << 2));
}
}
static void initialize_reg_file(void)
{
uint32_t addr;
/* Initialize the register file with the correct data */
addr = sdr_get_addr(&sdr_reg_file->signature);
writel(REG_FILE_INIT_SEQ_SIGNATURE, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->debug_data_addr);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->cur_stage);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->fom);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->failing_stage);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->debug1);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->debug2);
writel(0, SOCFPGA_SDR_ADDRESS + addr);
}
static void initialize_hps_phy(void)
{
uint32_t reg;
uint32_t addr;
/*
* Tracking also gets configured here because it's in the
* same register.
*/
uint32_t trk_sample_count = 7500;
uint32_t trk_long_idle_sample_count = (10 << 16) | 100;
/*
* Format is number of outer loops in the 16 MSB, sample
* count in 16 LSB.
*/
reg = 0;
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_ACDELAYEN_SET(2);
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_DQDELAYEN_SET(1);
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_DQSDELAYEN_SET(1);
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_DQSLOGICDELAYEN_SET(1);
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_RESETDELAYEN_SET(0);
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_LPDDRDIS_SET(1);
/*
* This field selects the intrinsic latency to RDATA_EN/FULL path.
* 00-bypass, 01- add 5 cycles, 10- add 10 cycles, 11- add 15 cycles.
*/
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_ADDLATSEL_SET(0);
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_SAMPLECOUNT_19_0_SET(
trk_sample_count);
addr = sdr_get_addr((u32 *)BASE_MMR);
writel(reg, SOCFPGA_SDR_ADDRESS + addr + SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_OFFSET);
reg = 0;
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_1_SAMPLECOUNT_31_20_SET(
trk_sample_count >>
SDR_CTRLGRP_PHYCTRL_PHYCTRL_0_SAMPLECOUNT_19_0_WIDTH);
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_1_LONGIDLESAMPLECOUNT_19_0_SET(
trk_long_idle_sample_count);
writel(reg, SOCFPGA_SDR_ADDRESS + addr + SDR_CTRLGRP_PHYCTRL_PHYCTRL_1_OFFSET);
reg = 0;
reg |= SDR_CTRLGRP_PHYCTRL_PHYCTRL_2_LONGIDLESAMPLECOUNT_31_20_SET(
trk_long_idle_sample_count >>
SDR_CTRLGRP_PHYCTRL_PHYCTRL_1_LONGIDLESAMPLECOUNT_19_0_WIDTH);
writel(reg, SOCFPGA_SDR_ADDRESS + addr + SDR_CTRLGRP_PHYCTRL_PHYCTRL_2_OFFSET);
}
static void initialize_tracking(void)
{
uint32_t concatenated_longidle = 0x0;
uint32_t concatenated_delays = 0x0;
uint32_t concatenated_rw_addr = 0x0;
uint32_t concatenated_refresh = 0x0;
uint32_t trk_sample_count = 7500;
uint32_t dtaps_per_ptap;
uint32_t tmp_delay;
uint32_t addr;
/*
* compute usable version of value in case we skip full
* computation later
*/
dtaps_per_ptap = 0;
tmp_delay = 0;
while (tmp_delay < IO_DELAY_PER_OPA_TAP) {
dtaps_per_ptap++;
tmp_delay += IO_DELAY_PER_DCHAIN_TAP;
}
dtaps_per_ptap--;
concatenated_longidle = concatenated_longidle ^ 10;
/*longidle outer loop */
concatenated_longidle = concatenated_longidle << 16;
concatenated_longidle = concatenated_longidle ^ 100;
/*longidle sample count */
concatenated_delays = concatenated_delays ^ 243;
/* trfc, worst case of 933Mhz 4Gb */
concatenated_delays = concatenated_delays << 8;
concatenated_delays = concatenated_delays ^ 14;
/* trcd, worst case */
concatenated_delays = concatenated_delays << 8;
concatenated_delays = concatenated_delays ^ 10;
/* vfifo wait */
concatenated_delays = concatenated_delays << 8;
concatenated_delays = concatenated_delays ^ 4;
/* mux delay */
concatenated_rw_addr = concatenated_rw_addr ^ RW_MGR_IDLE;
concatenated_rw_addr = concatenated_rw_addr << 8;
concatenated_rw_addr = concatenated_rw_addr ^ RW_MGR_ACTIVATE_1;
concatenated_rw_addr = concatenated_rw_addr << 8;
concatenated_rw_addr = concatenated_rw_addr ^ RW_MGR_SGLE_READ;
concatenated_rw_addr = concatenated_rw_addr << 8;
concatenated_rw_addr = concatenated_rw_addr ^ RW_MGR_PRECHARGE_ALL;
concatenated_refresh = concatenated_refresh ^ RW_MGR_REFRESH_ALL;
concatenated_refresh = concatenated_refresh << 24;
concatenated_refresh = concatenated_refresh ^ 1000; /* trefi */
/* Initialize the register file with the correct data */
addr = sdr_get_addr(&sdr_reg_file->dtaps_per_ptap);
writel(dtaps_per_ptap, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->trk_sample_count);
writel(trk_sample_count, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->trk_longidle);
writel(concatenated_longidle, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->delays);
writel(concatenated_delays, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->trk_rw_mgr_addr);
writel(concatenated_rw_addr, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->trk_read_dqs_width);
writel(RW_MGR_MEM_IF_READ_DQS_WIDTH, SOCFPGA_SDR_ADDRESS + addr);
addr = sdr_get_addr(&sdr_reg_file->trk_rfsh);
writel(concatenated_refresh, SOCFPGA_SDR_ADDRESS + addr);
}
int sdram_calibration_full(void)
{
struct param_type my_param;
struct gbl_type my_gbl;
uint32_t pass;
uint32_t i;
param = &my_param;
gbl = &my_gbl;
/* Initialize the debug mode flags */
gbl->phy_debug_mode_flags = 0;
/* Set the calibration enabled by default */
gbl->phy_debug_mode_flags |= PHY_DEBUG_ENABLE_CAL_RPT;
/*
* Only sweep all groups (regardless of fail state) by default
* Set enabled read test by default.
*/
#if DISABLE_GUARANTEED_READ
gbl->phy_debug_mode_flags |= PHY_DEBUG_DISABLE_GUARANTEED_READ;
#endif
/* Initialize the register file */
initialize_reg_file();
/* Initialize any PHY CSR */
initialize_hps_phy();
scc_mgr_initialize();
initialize_tracking();
/* USER Enable all ranks, groups */
for (i = 0; i < RW_MGR_MEM_NUMBER_OF_RANKS; i++)
param->skip_ranks[i] = 0;
for (i = 0; i < NUM_SHADOW_REGS; ++i)
param->skip_shadow_regs[i] = 0;
param->skip_groups = 0;
printf("%s: Preparing to start memory calibration\n", __FILE__);
debug("%s:%d\n", __func__, __LINE__);
debug_cond(DLEVEL == 1, "DDR3 FULL_RATE ranks=%lu cs/dimm=%lu dq/dqs=%lu,%lu vg/dqs=%lu,%lu ",
(long unsigned int)RW_MGR_MEM_NUMBER_OF_RANKS,
(long unsigned int)RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM,
(long unsigned int)RW_MGR_MEM_DQ_PER_READ_DQS,
(long unsigned int)RW_MGR_MEM_DQ_PER_WRITE_DQS,
(long unsigned int)RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS,
(long unsigned int)RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS);
debug_cond(DLEVEL == 1, "dqs=%lu,%lu dq=%lu dm=%lu ptap_delay=%lu dtap_delay=%lu ",
(long unsigned int)RW_MGR_MEM_IF_READ_DQS_WIDTH,
(long unsigned int)RW_MGR_MEM_IF_WRITE_DQS_WIDTH,
(long unsigned int)RW_MGR_MEM_DATA_WIDTH,
(long unsigned int)RW_MGR_MEM_DATA_MASK_WIDTH,
(long unsigned int)IO_DELAY_PER_OPA_TAP,
(long unsigned int)IO_DELAY_PER_DCHAIN_TAP);
debug_cond(DLEVEL == 1, "dtap_dqsen_delay=%lu, dll=%lu",
(long unsigned int)IO_DELAY_PER_DQS_EN_DCHAIN_TAP,
(long unsigned int)IO_DLL_CHAIN_LENGTH);
debug_cond(DLEVEL == 1, "max values: en_p=%lu dqdqs_p=%lu en_d=%lu dqs_in_d=%lu ",
(long unsigned int)IO_DQS_EN_PHASE_MAX,
(long unsigned int)IO_DQDQS_OUT_PHASE_MAX,
(long unsigned int)IO_DQS_EN_DELAY_MAX,
(long unsigned int)IO_DQS_IN_DELAY_MAX);
debug_cond(DLEVEL == 1, "io_in_d=%lu io_out1_d=%lu io_out2_d=%lu ",
(long unsigned int)IO_IO_IN_DELAY_MAX,
(long unsigned int)IO_IO_OUT1_DELAY_MAX,
(long unsigned int)IO_IO_OUT2_DELAY_MAX);
debug_cond(DLEVEL == 1, "dqs_in_reserve=%lu dqs_out_reserve=%lu\n",
(long unsigned int)IO_DQS_IN_RESERVE,
(long unsigned int)IO_DQS_OUT_RESERVE);
hc_initialize_rom_data();
/* update info for sims */
reg_file_set_stage(CAL_STAGE_NIL);
reg_file_set_group(0);
/*
* Load global needed for those actions that require
* some dynamic calibration support.
*/
dyn_calib_steps = STATIC_CALIB_STEPS;
/*
* Load global to allow dynamic selection of delay loop settings
* based on calibration mode.
*/
if (!(dyn_calib_steps & CALIB_SKIP_DELAY_LOOPS))
skip_delay_mask = 0xff;
else
skip_delay_mask = 0x0;
pass = run_mem_calibrate();
printf("%s: Calibration complete\n", __FILE__);
return pass;
}
Reference in a new issue View git blame Copy permalink