mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
184 lines
5.5 KiB
C
184 lines
5.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
|
|
* Copyright (C) 2017, Grinn - http://grinn-global.com/
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/clk_synthesizer.h>
|
|
#include <asm/arch/cpu.h>
|
|
#include <asm/arch/ddr_defs.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/mem.h>
|
|
#include <asm/arch/mux.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/emif.h>
|
|
#include <asm/io.h>
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
#include <power/tps65217.h>
|
|
#include <spl.h>
|
|
|
|
#ifndef CONFIG_SKIP_LOWLEVEL_INIT
|
|
|
|
static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
|
|
|
|
static struct module_pin_mux i2c0_pin_mux[] = {
|
|
{OFFSET(i2c0_sda), (MODE(0) | RXACTIVE |
|
|
PULLUDEN | SLEWCTRL)}, /* I2C_DATA */
|
|
{OFFSET(i2c0_scl), (MODE(0) | RXACTIVE |
|
|
PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */
|
|
{-1},
|
|
};
|
|
|
|
static struct module_pin_mux nand_pin_mux[] = {
|
|
{OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */
|
|
{OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */
|
|
{OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */
|
|
{OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */
|
|
{OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */
|
|
{OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */
|
|
{OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */
|
|
{OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */
|
|
{OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */
|
|
{OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */
|
|
{OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */
|
|
{OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */
|
|
{OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */
|
|
{OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */
|
|
{OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */
|
|
{-1},
|
|
};
|
|
|
|
static void enable_i2c0_pin_mux(void)
|
|
{
|
|
configure_module_pin_mux(i2c0_pin_mux);
|
|
}
|
|
|
|
void chilisom_enable_pin_mux(void)
|
|
{
|
|
/* chilisom pin mux */
|
|
configure_module_pin_mux(nand_pin_mux);
|
|
}
|
|
|
|
static const struct ddr_data ddr3_chilisom_data = {
|
|
.datardsratio0 = MT41K256M16HA125E_RD_DQS,
|
|
.datawdsratio0 = MT41K256M16HA125E_WR_DQS,
|
|
.datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE,
|
|
.datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA,
|
|
};
|
|
|
|
static const struct cmd_control ddr3_chilisom_cmd_ctrl_data = {
|
|
.cmd0csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
|
|
.cmd1csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
|
|
.cmd2csratio = MT41K256M16HA125E_RATIO,
|
|
.cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT,
|
|
};
|
|
|
|
static struct emif_regs ddr3_chilisom_emif_reg_data = {
|
|
.sdram_config = MT41K256M16HA125E_EMIF_SDCFG,
|
|
.ref_ctrl = MT41K256M16HA125E_EMIF_SDREF,
|
|
.sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1,
|
|
.sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2,
|
|
.sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3,
|
|
.ocp_config = 0x00141414,
|
|
.zq_config = MT41K256M16HA125E_ZQ_CFG,
|
|
.emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY,
|
|
};
|
|
|
|
void chilisom_spl_board_init(void)
|
|
{
|
|
int mpu_vdd;
|
|
int usb_cur_lim;
|
|
|
|
enable_i2c0_pin_mux();
|
|
|
|
/* Get the frequency */
|
|
dpll_mpu_opp100.m = am335x_get_efuse_mpu_max_freq(cdev);
|
|
|
|
|
|
if (i2c_probe(TPS65217_CHIP_PM))
|
|
return;
|
|
|
|
/*
|
|
* Increase USB current limit to 1300mA or 1800mA and set
|
|
* the MPU voltage controller as needed.
|
|
*/
|
|
if (dpll_mpu_opp100.m == MPUPLL_M_1000) {
|
|
usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1800MA;
|
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1325MV;
|
|
} else {
|
|
usb_cur_lim = TPS65217_USB_INPUT_CUR_LIMIT_1300MA;
|
|
mpu_vdd = TPS65217_DCDC_VOLT_SEL_1275MV;
|
|
}
|
|
|
|
if (tps65217_reg_write(TPS65217_PROT_LEVEL_NONE,
|
|
TPS65217_POWER_PATH,
|
|
usb_cur_lim,
|
|
TPS65217_USB_INPUT_CUR_LIMIT_MASK))
|
|
puts("tps65217_reg_write failure\n");
|
|
|
|
/* Set DCDC3 (CORE) voltage to 1.125V */
|
|
if (tps65217_voltage_update(TPS65217_DEFDCDC3,
|
|
TPS65217_DCDC_VOLT_SEL_1125MV)) {
|
|
puts("tps65217_voltage_update failure\n");
|
|
return;
|
|
}
|
|
/* Set CORE Frequencies to OPP100 */
|
|
do_setup_dpll(&dpll_core_regs, &dpll_core_opp100);
|
|
|
|
/* Set DCDC2 (MPU) voltage */
|
|
if (tps65217_voltage_update(TPS65217_DEFDCDC2, mpu_vdd)) {
|
|
puts("tps65217_voltage_update failure\n");
|
|
return;
|
|
}
|
|
|
|
/* Set LDO3 to 1.8V and LDO4 to 3.3V */
|
|
if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
|
|
TPS65217_DEFLS1,
|
|
TPS65217_LDO_VOLTAGE_OUT_1_8,
|
|
TPS65217_LDO_MASK))
|
|
puts("tps65217_reg_write failure\n");
|
|
|
|
if (tps65217_reg_write(TPS65217_PROT_LEVEL_2,
|
|
TPS65217_DEFLS2,
|
|
TPS65217_LDO_VOLTAGE_OUT_3_3,
|
|
TPS65217_LDO_MASK))
|
|
puts("tps65217_reg_write failure\n");
|
|
|
|
/* Set MPU Frequency to what we detected now that voltages are set */
|
|
do_setup_dpll(&dpll_mpu_regs, &dpll_mpu_opp100);
|
|
}
|
|
|
|
#define OSC (V_OSCK/1000000)
|
|
const struct dpll_params dpll_ddr_chilisom = {
|
|
400, OSC-1, 1, -1, -1, -1, -1};
|
|
|
|
const struct dpll_params *get_dpll_ddr_params(void)
|
|
{
|
|
return &dpll_ddr_chilisom;
|
|
}
|
|
|
|
const struct ctrl_ioregs ioregs_chilisom = {
|
|
.cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
.dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
|
|
};
|
|
|
|
void sdram_init(void)
|
|
{
|
|
config_ddr(400, &ioregs_chilisom,
|
|
&ddr3_chilisom_data,
|
|
&ddr3_chilisom_cmd_ctrl_data,
|
|
&ddr3_chilisom_emif_reg_data, 0);
|
|
}
|
|
|
|
#endif /* CONFIG_SKIP_LOWLEVEL_INIT */
|