mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
a30a549a35
Many of the spd.h #includers don't need it, and wanted to have spd_sdram() declared instead. Since they didn't get that, some also had open coded extern declarations of it instead or as well. Fix it all up by using spd_sdram.h where needed. Signed-off-by: Jon Loeliger <jdl@freescale.com>
129 lines
3 KiB
C
129 lines
3 KiB
C
/*
|
|
* Copyright (C) 2007 Freescale Semiconductor, Inc.
|
|
* Dave Liu <daveliu@freescale.com>
|
|
*
|
|
* CREDITS: Kim Phillips contribute to LIBFDT code
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <spd_sdram.h>
|
|
#if defined(CONFIG_OF_LIBFDT)
|
|
#include <libfdt.h>
|
|
#endif
|
|
#if defined(CONFIG_PQ_MDS_PIB)
|
|
#include "../common/pq-mds-pib.h"
|
|
#endif
|
|
|
|
int board_early_init_f(void)
|
|
{
|
|
u8 *bcsr = (u8 *)CFG_BCSR;
|
|
|
|
/* Enable flash write */
|
|
bcsr[0x9] &= ~0x04;
|
|
/* Clear all of the interrupt of BCSR */
|
|
bcsr[0xe] = 0xff;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int board_early_init_r(void)
|
|
{
|
|
#ifdef CONFIG_PQ_MDS_PIB
|
|
pib_init();
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
|
|
extern void ddr_enable_ecc(unsigned int dram_size);
|
|
#endif
|
|
int fixed_sdram(void);
|
|
|
|
long int initdram(int board_type)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CFG_IMMR;
|
|
u32 msize = 0;
|
|
|
|
if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32) im)
|
|
return -1;
|
|
|
|
#if defined(CONFIG_SPD_EEPROM)
|
|
msize = spd_sdram();
|
|
#else
|
|
msize = fixed_sdram();
|
|
#endif
|
|
|
|
#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRC)
|
|
/* Initialize DDR ECC byte */
|
|
ddr_enable_ecc(msize * 1024 * 1024);
|
|
#endif
|
|
|
|
/* return total bus DDR size(bytes) */
|
|
return (msize * 1024 * 1024);
|
|
}
|
|
|
|
#if !defined(CONFIG_SPD_EEPROM)
|
|
/*************************************************************************
|
|
* fixed sdram init -- doesn't use serial presence detect.
|
|
************************************************************************/
|
|
int fixed_sdram(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *) CFG_IMMR;
|
|
u32 msize = CFG_DDR_SIZE * 1024 * 1024;
|
|
u32 msize_log2 = __ilog2(msize);
|
|
|
|
im->sysconf.ddrlaw[0].bar = CFG_DDR_SDRAM_BASE >> 12;
|
|
im->sysconf.ddrlaw[0].ar = LBLAWAR_EN | (msize_log2 - 1);
|
|
|
|
#if (CFG_DDR_SIZE != 512)
|
|
#warning Currenly any ddr size other than 512 is not supported
|
|
#endif
|
|
im->sysconf.ddrcdr = CFG_DDRCDR_VALUE;
|
|
udelay(50000);
|
|
|
|
im->ddr.sdram_clk_cntl = CFG_DDR_SDRAM_CLK_CNTL;
|
|
udelay(1000);
|
|
|
|
im->ddr.csbnds[0].csbnds = CFG_DDR_CS0_BNDS;
|
|
im->ddr.cs_config[0] = CFG_DDR_CS0_CONFIG;
|
|
udelay(1000);
|
|
|
|
im->ddr.timing_cfg_0 = CFG_DDR_TIMING_0;
|
|
im->ddr.timing_cfg_1 = CFG_DDR_TIMING_1;
|
|
im->ddr.timing_cfg_2 = CFG_DDR_TIMING_2;
|
|
im->ddr.timing_cfg_3 = CFG_DDR_TIMING_3;
|
|
im->ddr.sdram_cfg = CFG_DDR_SDRAM_CFG;
|
|
im->ddr.sdram_cfg2 = CFG_DDR_SDRAM_CFG2;
|
|
im->ddr.sdram_mode = CFG_DDR_MODE;
|
|
im->ddr.sdram_mode2 = CFG_DDR_MODE2;
|
|
im->ddr.sdram_interval = CFG_DDR_INTERVAL;
|
|
__asm__ __volatile__("sync");
|
|
udelay(1000);
|
|
|
|
im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
|
|
udelay(2000);
|
|
return CFG_DDR_SIZE;
|
|
}
|
|
#endif /*!CFG_SPD_EEPROM */
|
|
|
|
int checkboard(void)
|
|
{
|
|
puts("Board: Freescale MPC837xEMDS\n");
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_OF_BOARD_SETUP)
|
|
void ft_board_setup(void *blob, bd_t *bd)
|
|
{
|
|
ft_cpu_setup(blob, bd);
|
|
#ifdef CONFIG_PCI
|
|
ft_pci_setup(blob, bd);
|
|
#endif
|
|
}
|
|
#endif /* CONFIG_OF_BOARD_SETUP */
|