mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-28 23:51:33 +00:00
a4e0ef50da
Update the xlate() method to use ofnode_phandle_args instead of the fdtdec variant. This will allow drivers to support a live device tree. Signed-off-by: Simon Glass <sjg@chromium.org>
289 lines
7.2 KiB
C
289 lines
7.2 KiB
C
/*
|
|
* (C) Copyright 2017
|
|
* Vikas Manocha, <vikas.manocha@st.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/rcc.h>
|
|
#include <asm/arch/stm32.h>
|
|
#include <asm/arch/stm32_periph.h>
|
|
|
|
#define RCC_CR_HSION BIT(0)
|
|
#define RCC_CR_HSEON BIT(16)
|
|
#define RCC_CR_HSERDY BIT(17)
|
|
#define RCC_CR_HSEBYP BIT(18)
|
|
#define RCC_CR_CSSON BIT(19)
|
|
#define RCC_CR_PLLON BIT(24)
|
|
#define RCC_CR_PLLRDY BIT(25)
|
|
|
|
#define RCC_PLLCFGR_PLLM_MASK GENMASK(5, 0)
|
|
#define RCC_PLLCFGR_PLLN_MASK GENMASK(14, 6)
|
|
#define RCC_PLLCFGR_PLLP_MASK GENMASK(17, 16)
|
|
#define RCC_PLLCFGR_PLLQ_MASK GENMASK(27, 24)
|
|
#define RCC_PLLCFGR_PLLSRC BIT(22)
|
|
#define RCC_PLLCFGR_PLLM_SHIFT 0
|
|
#define RCC_PLLCFGR_PLLN_SHIFT 6
|
|
#define RCC_PLLCFGR_PLLP_SHIFT 16
|
|
#define RCC_PLLCFGR_PLLQ_SHIFT 24
|
|
|
|
#define RCC_CFGR_AHB_PSC_MASK GENMASK(7, 4)
|
|
#define RCC_CFGR_APB1_PSC_MASK GENMASK(12, 10)
|
|
#define RCC_CFGR_APB2_PSC_MASK GENMASK(15, 13)
|
|
#define RCC_CFGR_SW0 BIT(0)
|
|
#define RCC_CFGR_SW1 BIT(1)
|
|
#define RCC_CFGR_SW_MASK GENMASK(1, 0)
|
|
#define RCC_CFGR_SW_HSI 0
|
|
#define RCC_CFGR_SW_HSE RCC_CFGR_SW0
|
|
#define RCC_CFGR_SW_PLL RCC_CFGR_SW1
|
|
#define RCC_CFGR_SWS0 BIT(2)
|
|
#define RCC_CFGR_SWS1 BIT(3)
|
|
#define RCC_CFGR_SWS_MASK GENMASK(3, 2)
|
|
#define RCC_CFGR_SWS_HSI 0
|
|
#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0
|
|
#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1
|
|
#define RCC_CFGR_HPRE_SHIFT 4
|
|
#define RCC_CFGR_PPRE1_SHIFT 10
|
|
#define RCC_CFGR_PPRE2_SHIFT 13
|
|
|
|
/*
|
|
* Offsets of some PWR registers
|
|
*/
|
|
#define PWR_CR1_ODEN BIT(16)
|
|
#define PWR_CR1_ODSWEN BIT(17)
|
|
#define PWR_CSR1_ODRDY BIT(16)
|
|
#define PWR_CSR1_ODSWRDY BIT(17)
|
|
|
|
struct pll_psc {
|
|
u8 pll_m;
|
|
u16 pll_n;
|
|
u8 pll_p;
|
|
u8 pll_q;
|
|
u8 ahb_psc;
|
|
u8 apb1_psc;
|
|
u8 apb2_psc;
|
|
};
|
|
|
|
#define AHB_PSC_1 0
|
|
#define AHB_PSC_2 0x8
|
|
#define AHB_PSC_4 0x9
|
|
#define AHB_PSC_8 0xA
|
|
#define AHB_PSC_16 0xB
|
|
#define AHB_PSC_64 0xC
|
|
#define AHB_PSC_128 0xD
|
|
#define AHB_PSC_256 0xE
|
|
#define AHB_PSC_512 0xF
|
|
|
|
#define APB_PSC_1 0
|
|
#define APB_PSC_2 0x4
|
|
#define APB_PSC_4 0x5
|
|
#define APB_PSC_8 0x6
|
|
#define APB_PSC_16 0x7
|
|
|
|
#if !defined(CONFIG_STM32_HSE_HZ)
|
|
#error "CONFIG_STM32_HSE_HZ not defined!"
|
|
#else
|
|
#if (CONFIG_STM32_HSE_HZ == 25000000)
|
|
#if (CONFIG_SYS_CLK_FREQ == 200000000)
|
|
/* 200 MHz */
|
|
struct pll_psc sys_pll_psc = {
|
|
.pll_m = 25,
|
|
.pll_n = 400,
|
|
.pll_p = 2,
|
|
.pll_q = 8,
|
|
.ahb_psc = AHB_PSC_1,
|
|
.apb1_psc = APB_PSC_4,
|
|
.apb2_psc = APB_PSC_2
|
|
};
|
|
#endif
|
|
#else
|
|
#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists"
|
|
#endif
|
|
#endif
|
|
|
|
int configure_clocks(void)
|
|
{
|
|
/* Reset RCC configuration */
|
|
setbits_le32(&STM32_RCC->cr, RCC_CR_HSION);
|
|
writel(0, &STM32_RCC->cfgr); /* Reset CFGR */
|
|
clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON
|
|
| RCC_CR_PLLON));
|
|
writel(0x24003010, &STM32_RCC->pllcfgr); /* Reset value from RM */
|
|
clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP);
|
|
writel(0, &STM32_RCC->cir); /* Disable all interrupts */
|
|
|
|
/* Configure for HSE+PLL operation */
|
|
setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON);
|
|
while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY))
|
|
;
|
|
|
|
setbits_le32(&STM32_RCC->cfgr, ((
|
|
sys_pll_psc.ahb_psc << RCC_CFGR_HPRE_SHIFT)
|
|
| (sys_pll_psc.apb1_psc << RCC_CFGR_PPRE1_SHIFT)
|
|
| (sys_pll_psc.apb2_psc << RCC_CFGR_PPRE2_SHIFT)));
|
|
|
|
/* Configure the main PLL */
|
|
uint32_t pllcfgr = 0;
|
|
pllcfgr = RCC_PLLCFGR_PLLSRC; /* pll source HSE */
|
|
pllcfgr |= sys_pll_psc.pll_m << RCC_PLLCFGR_PLLM_SHIFT;
|
|
pllcfgr |= sys_pll_psc.pll_n << RCC_PLLCFGR_PLLN_SHIFT;
|
|
pllcfgr |= ((sys_pll_psc.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT;
|
|
pllcfgr |= sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT;
|
|
writel(pllcfgr, &STM32_RCC->pllcfgr);
|
|
|
|
/* Enable the main PLL */
|
|
setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON);
|
|
while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY))
|
|
;
|
|
|
|
/* Enable high performance mode, System frequency up to 200 MHz */
|
|
setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN);
|
|
setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODEN);
|
|
/* Infinite wait! */
|
|
while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODRDY))
|
|
;
|
|
/* Enable the Over-drive switch */
|
|
setbits_le32(&STM32_PWR->cr1, PWR_CR1_ODSWEN);
|
|
/* Infinite wait! */
|
|
while (!(readl(&STM32_PWR->csr1) & PWR_CSR1_ODSWRDY))
|
|
;
|
|
|
|
stm32_flash_latency_cfg(5);
|
|
clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1));
|
|
setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL);
|
|
|
|
while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) !=
|
|
RCC_CFGR_SWS_PLL)
|
|
;
|
|
|
|
return 0;
|
|
}
|
|
|
|
unsigned long clock_get(enum clock clck)
|
|
{
|
|
u32 sysclk = 0;
|
|
u32 shift = 0;
|
|
/* Prescaler table lookups for clock computation */
|
|
u8 ahb_psc_table[16] = {
|
|
0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9
|
|
};
|
|
u8 apb_psc_table[8] = {
|
|
0, 0, 0, 0, 1, 2, 3, 4
|
|
};
|
|
|
|
if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) ==
|
|
RCC_CFGR_SWS_PLL) {
|
|
u16 pllm, plln, pllp;
|
|
pllm = (readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLM_MASK);
|
|
plln = ((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLN_MASK)
|
|
>> RCC_PLLCFGR_PLLN_SHIFT);
|
|
pllp = ((((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLP_MASK)
|
|
>> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1);
|
|
sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp;
|
|
}
|
|
|
|
switch (clck) {
|
|
case CLOCK_CORE:
|
|
return sysclk;
|
|
break;
|
|
case CLOCK_AHB:
|
|
shift = ahb_psc_table[(
|
|
(readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK)
|
|
>> RCC_CFGR_HPRE_SHIFT)];
|
|
return sysclk >>= shift;
|
|
break;
|
|
case CLOCK_APB1:
|
|
shift = apb_psc_table[(
|
|
(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK)
|
|
>> RCC_CFGR_PPRE1_SHIFT)];
|
|
return sysclk >>= shift;
|
|
break;
|
|
case CLOCK_APB2:
|
|
shift = apb_psc_table[(
|
|
(readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK)
|
|
>> RCC_CFGR_PPRE2_SHIFT)];
|
|
return sysclk >>= shift;
|
|
break;
|
|
default:
|
|
return 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int stm32_clk_enable(struct clk *clk)
|
|
{
|
|
u32 offset = clk->id / 32;
|
|
u32 bit_index = clk->id % 32;
|
|
|
|
debug("%s: clkid = %ld, offset from AHB1ENR is %d, bit_index = %d\n",
|
|
__func__, clk->id, offset, bit_index);
|
|
setbits_le32(&STM32_RCC->ahb1enr + offset, BIT(bit_index));
|
|
|
|
return 0;
|
|
}
|
|
|
|
void clock_setup(int peripheral)
|
|
{
|
|
switch (peripheral) {
|
|
case SYSCFG_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->apb2enr, RCC_APB2ENR_SYSCFGEN);
|
|
break;
|
|
case TIMER2_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN);
|
|
break;
|
|
case STMMAC_CLOCK_CFG:
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_EN);
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_RX_EN);
|
|
setbits_le32(&STM32_RCC->ahb1enr, RCC_AHB1ENR_ETHMAC_TX_EN);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int stm32_clk_probe(struct udevice *dev)
|
|
{
|
|
debug("%s: stm32_clk_probe\n", __func__);
|
|
configure_clocks();
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stm32_clk_of_xlate(struct clk *clk, struct ofnode_phandle_args *args)
|
|
{
|
|
debug("%s(clk=%p)\n", __func__, clk);
|
|
|
|
if (args->args_count != 2) {
|
|
debug("Invaild args_count: %d\n", args->args_count);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (args->args_count)
|
|
clk->id = args->args[1];
|
|
else
|
|
clk->id = 0;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct clk_ops stm32_clk_ops = {
|
|
.of_xlate = stm32_clk_of_xlate,
|
|
.enable = stm32_clk_enable,
|
|
};
|
|
|
|
static const struct udevice_id stm32_clk_ids[] = {
|
|
{ .compatible = "st,stm32f42xx-rcc"},
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(stm32f7_clk) = {
|
|
.name = "stm32f7_clk",
|
|
.id = UCLASS_CLK,
|
|
.of_match = stm32_clk_ids,
|
|
.ops = &stm32_clk_ops,
|
|
.probe = stm32_clk_probe,
|
|
.flags = DM_FLAG_PRE_RELOC,
|
|
};
|