mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 02:51:00 +00:00
8bd37ce3cd
This patch adds a separate driver for the MDIO interface of the Marvell Ethernet controllers based on driver model. There are two reasons to have a separate driver rather than including it inside the MAC driver itself: *) The MDIO interface is shared by all Ethernet ports, so a driver must guarantee non-concurrent accesses to this MDIO interface. The most logical way is to have a separate driver that handles this single MDIO interface, used by all Ethernet ports. *) The MDIO interface is the same between the existing mv643xx_eth driver and the new mvneta/mvpp2 driver. Even though it is for now only used by the mvneta/mvpp2 driver, it will in the future be used by the mv643xx_eth driver as well. This driver supports SMI IEEE for 802.3 Clause 22 and XSMI for IEEE 802.3 Clause 45. This patch also adds device tree binding for marvell MDIO driver. Signed-off-by: Ken Ma <make@marvell.com> Signed-off-by: Alex Marginean <alexm.osslist@gmail.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com>
236 lines
5.5 KiB
C
236 lines
5.5 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2018 Marvell International Ltd.
|
|
* Author: Ken Ma<make@marvell.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <dm.h>
|
|
#include <dm/device-internal.h>
|
|
#include <dm/lists.h>
|
|
#include <miiphy.h>
|
|
#include <phy.h>
|
|
#include <asm/io.h>
|
|
#include <wait_bit.h>
|
|
|
|
#define MVMDIO_SMI_DATA_SHIFT 0
|
|
#define MVMDIO_SMI_PHY_ADDR_SHIFT 16
|
|
#define MVMDIO_SMI_PHY_REG_SHIFT 21
|
|
#define MVMDIO_SMI_READ_OPERATION BIT(26)
|
|
#define MVMDIO_SMI_WRITE_OPERATION 0
|
|
#define MVMDIO_SMI_READ_VALID BIT(27)
|
|
#define MVMDIO_SMI_BUSY BIT(28)
|
|
|
|
#define MVMDIO_XSMI_MGNT_REG 0x0
|
|
#define MVMDIO_XSMI_PHYADDR_SHIFT 16
|
|
#define MVMDIO_XSMI_DEVADDR_SHIFT 21
|
|
#define MVMDIO_XSMI_WRITE_OPERATION (0x5 << 26)
|
|
#define MVMDIO_XSMI_READ_OPERATION (0x7 << 26)
|
|
#define MVMDIO_XSMI_READ_VALID BIT(29)
|
|
#define MVMDIO_XSMI_BUSY BIT(30)
|
|
#define MVMDIO_XSMI_ADDR_REG 0x8
|
|
|
|
enum mvmdio_bus_type {
|
|
BUS_TYPE_SMI,
|
|
BUS_TYPE_XSMI
|
|
};
|
|
|
|
struct mvmdio_priv {
|
|
void *mdio_base;
|
|
enum mvmdio_bus_type type;
|
|
};
|
|
|
|
static int mvmdio_smi_read(struct udevice *dev, int addr,
|
|
int devad, int reg)
|
|
{
|
|
struct mvmdio_priv *priv = dev_get_priv(dev);
|
|
u32 val;
|
|
int ret;
|
|
|
|
if (devad != MDIO_DEVAD_NONE)
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = wait_for_bit_le32(priv->mdio_base, MVMDIO_SMI_BUSY,
|
|
false, CONFIG_SYS_HZ, false);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
writel(((addr << MVMDIO_SMI_PHY_ADDR_SHIFT) |
|
|
(reg << MVMDIO_SMI_PHY_REG_SHIFT) |
|
|
MVMDIO_SMI_READ_OPERATION),
|
|
priv->mdio_base);
|
|
|
|
ret = wait_for_bit_le32(priv->mdio_base, MVMDIO_SMI_BUSY,
|
|
false, CONFIG_SYS_HZ, false);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
val = readl(priv->mdio_base);
|
|
if (!(val & MVMDIO_SMI_READ_VALID)) {
|
|
pr_err("SMI bus read not valid\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return val & GENMASK(15, 0);
|
|
}
|
|
|
|
static int mvmdio_smi_write(struct udevice *dev, int addr, int devad,
|
|
int reg, u16 value)
|
|
{
|
|
struct mvmdio_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
if (devad != MDIO_DEVAD_NONE)
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = wait_for_bit_le32(priv->mdio_base, MVMDIO_SMI_BUSY,
|
|
false, CONFIG_SYS_HZ, false);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
writel(((addr << MVMDIO_SMI_PHY_ADDR_SHIFT) |
|
|
(reg << MVMDIO_SMI_PHY_REG_SHIFT) |
|
|
MVMDIO_SMI_WRITE_OPERATION |
|
|
(value << MVMDIO_SMI_DATA_SHIFT)),
|
|
priv->mdio_base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvmdio_xsmi_read(struct udevice *dev, int addr,
|
|
int devad, int reg)
|
|
{
|
|
struct mvmdio_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
if (devad == MDIO_DEVAD_NONE)
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = wait_for_bit_le32(priv->mdio_base, MVMDIO_XSMI_BUSY,
|
|
false, CONFIG_SYS_HZ, false);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
writel(reg & GENMASK(15, 0), priv->mdio_base + MVMDIO_XSMI_ADDR_REG);
|
|
writel(((addr << MVMDIO_XSMI_PHYADDR_SHIFT) |
|
|
(devad << MVMDIO_XSMI_DEVADDR_SHIFT) |
|
|
MVMDIO_XSMI_READ_OPERATION),
|
|
priv->mdio_base + MVMDIO_XSMI_MGNT_REG);
|
|
|
|
ret = wait_for_bit_le32(priv->mdio_base, MVMDIO_XSMI_BUSY,
|
|
false, CONFIG_SYS_HZ, false);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (!(readl(priv->mdio_base + MVMDIO_XSMI_MGNT_REG) &
|
|
MVMDIO_XSMI_READ_VALID)) {
|
|
pr_err("XSMI bus read not valid\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return readl(priv->mdio_base + MVMDIO_XSMI_MGNT_REG) & GENMASK(15, 0);
|
|
}
|
|
|
|
static int mvmdio_xsmi_write(struct udevice *dev, int addr, int devad,
|
|
int reg, u16 value)
|
|
{
|
|
struct mvmdio_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
if (devad == MDIO_DEVAD_NONE)
|
|
return -EOPNOTSUPP;
|
|
|
|
ret = wait_for_bit_le32(priv->mdio_base, MVMDIO_XSMI_BUSY,
|
|
false, CONFIG_SYS_HZ, false);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
writel(reg & GENMASK(15, 0), priv->mdio_base + MVMDIO_XSMI_ADDR_REG);
|
|
writel(((addr << MVMDIO_XSMI_PHYADDR_SHIFT) |
|
|
(devad << MVMDIO_XSMI_DEVADDR_SHIFT) |
|
|
MVMDIO_XSMI_WRITE_OPERATION | value),
|
|
priv->mdio_base + MVMDIO_XSMI_MGNT_REG);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mvmdio_read(struct udevice *dev, int addr, int devad, int reg)
|
|
{
|
|
struct mvmdio_priv *priv = dev_get_priv(dev);
|
|
int err = -ENOTSUPP;
|
|
|
|
switch (priv->type) {
|
|
case BUS_TYPE_SMI:
|
|
err = mvmdio_smi_read(dev, addr, devad, reg);
|
|
break;
|
|
case BUS_TYPE_XSMI:
|
|
err = mvmdio_xsmi_read(dev, addr, devad, reg);
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int mvmdio_write(struct udevice *dev, int addr, int devad, int reg,
|
|
u16 value)
|
|
{
|
|
struct mvmdio_priv *priv = dev_get_priv(dev);
|
|
int err = -ENOTSUPP;
|
|
|
|
switch (priv->type) {
|
|
case BUS_TYPE_SMI:
|
|
err = mvmdio_smi_write(dev, addr, devad, reg, value);
|
|
break;
|
|
case BUS_TYPE_XSMI:
|
|
err = mvmdio_xsmi_write(dev, addr, devad, reg, value);
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Name the device, we use the device tree node name.
|
|
* This can be overwritten by MDIO class code if device-name property is
|
|
* present.
|
|
*/
|
|
static int mvmdio_bind(struct udevice *dev)
|
|
{
|
|
if (ofnode_valid(dev->node))
|
|
device_set_name(dev, ofnode_get_name(dev->node));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Get device base address and type, either C22 SMII or C45 XSMI */
|
|
static int mvmdio_probe(struct udevice *dev)
|
|
{
|
|
struct mvmdio_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->mdio_base = (void *)dev_read_addr(dev);
|
|
priv->type = (enum mvmdio_bus_type)dev_get_driver_data(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct mdio_ops mvmdio_ops = {
|
|
.read = mvmdio_read,
|
|
.write = mvmdio_write,
|
|
};
|
|
|
|
static const struct udevice_id mvmdio_ids[] = {
|
|
{ .compatible = "marvell,orion-mdio", .data = BUS_TYPE_SMI },
|
|
{ .compatible = "marvell,xmdio", .data = BUS_TYPE_XSMI },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(mvmdio) = {
|
|
.name = "mvmdio",
|
|
.id = UCLASS_MDIO,
|
|
.of_match = mvmdio_ids,
|
|
.bind = mvmdio_bind,
|
|
.probe = mvmdio_probe,
|
|
.ops = &mvmdio_ops,
|
|
.priv_auto_alloc_size = sizeof(struct mvmdio_priv),
|
|
};
|
|
|