mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 15:53:02 +00:00
93e1459641
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Drop changes for PEP 4 following python tools] Signed-off-by: Tom Rini <trini@ti.com>
871 lines
18 KiB
INI
871 lines
18 KiB
INI
/* sim.cfg -- Simulator configuration script file
|
|
Copyright (C) 2001-2002, Marko Mlinar, markom@opencores.org
|
|
|
|
This file is part of OpenRISC 1000 Architectural Simulator.
|
|
It contains the default configuration and help about configuring
|
|
the simulator.
|
|
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
|
|
/* INTRODUCTION
|
|
|
|
The ork1sim has various parameters, that are set in configuration files
|
|
like this one. The user can switch between configurations at startup by
|
|
specifying the required configuration file with the -f <filename.cfg> option.
|
|
If no configuration file is specified or1ksim searches for the default
|
|
configuration file sim.cfg. First it searches for './sim.cfg'. If this
|
|
file is not found, it searches for '~/or1k/sim.cfg'. If this file is
|
|
not found too, it reverts to the built-in default configuration.
|
|
|
|
NOTE: Users should not rely on the built-in configuration, since the
|
|
default configuration may differ between version.
|
|
Rather create a configuration file that sets all critical values.
|
|
|
|
This file may contain (standard C) comments only - no // support.
|
|
|
|
Configure files may be be included, using:
|
|
include "file_name_to_include"
|
|
|
|
Like normal configuration files, the included file is divided into
|
|
sections. Each section is described in detail also.
|
|
|
|
Some section have subsections. One example of such a subsection is:
|
|
|
|
device <index>
|
|
instance specific parameters...
|
|
enddevice
|
|
|
|
which creates a device instance.
|
|
*/
|
|
|
|
|
|
/* MEMORY SECTION
|
|
|
|
This section specifies how the memory is generated and the blocks
|
|
it consists of.
|
|
|
|
type = random/unknown/pattern
|
|
Specifies the initial memory values.
|
|
'random' generates random memory using seed 'random_seed'.
|
|
'pattern' fills memory with 'pattern'.
|
|
'unknown' does not specify how memory should be generated,
|
|
leaving the memory in a undefined state. This is the fastest
|
|
option.
|
|
|
|
random_seed = <value>
|
|
random seed for randomizer, used if type = 'random'.
|
|
|
|
pattern = <value>
|
|
pattern to fill memory, used if type = 'pattern'.
|
|
|
|
nmemories = <value>
|
|
number of memory instances connected
|
|
|
|
baseaddr = <hex_value>
|
|
memory start address
|
|
|
|
size = <hex_value>
|
|
memory size
|
|
|
|
name = "<string>"
|
|
memory block name
|
|
|
|
ce = <value>
|
|
chip enable index of the memory instance
|
|
|
|
mc = <value>
|
|
memory controller this memory is connected to
|
|
|
|
delayr = <value>
|
|
cycles, required for read access, -1 if instance does not support reading
|
|
|
|
delayw = <value>
|
|
cycles, required for write access, -1 if instance does not support writing
|
|
|
|
log = "<filename>"
|
|
filename, where to log memory accesses to, no log, if log command is not specified
|
|
*/
|
|
|
|
|
|
section memory
|
|
pattern = 0x00
|
|
type = unknown /* Fastest */
|
|
|
|
name = "FLASH"
|
|
ce = 0
|
|
mc = 0
|
|
baseaddr = 0xf0000000
|
|
size = 0x01000000
|
|
delayr = 1
|
|
delayw = -1
|
|
end
|
|
|
|
section memory
|
|
pattern = 0x00
|
|
type = unknown /* Fastest */
|
|
|
|
name = "RAM"
|
|
ce = 1
|
|
mc = 0
|
|
baseaddr = 0x00000000
|
|
size = 0x02000000
|
|
delayr = 1
|
|
delayw = 1
|
|
end
|
|
|
|
section memory
|
|
pattern = 0x00
|
|
type = unknown /* Fastest */
|
|
|
|
name = "SRAM"
|
|
mc = 0
|
|
ce = 2
|
|
baseaddr = 0xa4000000
|
|
size = 0x00100000
|
|
delayr = 1
|
|
delayw = 2
|
|
end
|
|
|
|
|
|
/* IMMU SECTION
|
|
|
|
This section configures the Instruction Memory Manangement Unit
|
|
|
|
enabled = 0/1
|
|
'0': disabled
|
|
'1': enabled
|
|
(NOTE: UPR bit is set)
|
|
|
|
nsets = <value>
|
|
number of ITLB sets; must be power of two
|
|
|
|
nways = <value>
|
|
number of ITLB ways
|
|
|
|
pagesize = <value>
|
|
instruction page size; must be power of two
|
|
|
|
entrysize = <value>
|
|
instruction entry size in bytes
|
|
|
|
ustates = <value>
|
|
number of ITLB usage states (2, 3, 4 etc., max is 4)
|
|
|
|
hitdelay = <value>
|
|
number of cycles immu hit costs
|
|
|
|
missdelay = <value>
|
|
number of cycles immu miss costs
|
|
*/
|
|
|
|
section immu
|
|
enabled = 1
|
|
nsets = 64
|
|
nways = 1
|
|
pagesize = 8192
|
|
hitdelay = 0
|
|
missdelay = 0
|
|
end
|
|
|
|
|
|
/* DMMU SECTION
|
|
|
|
This section configures the Data Memory Manangement Unit
|
|
|
|
enabled = 0/1
|
|
'0': disabled
|
|
'1': enabled
|
|
(NOTE: UPR bit is set)
|
|
|
|
nsets = <value>
|
|
number of DTLB sets; must be power of two
|
|
|
|
nways = <value>
|
|
number of DTLB ways
|
|
|
|
pagesize = <value>
|
|
data page size; must be power of two
|
|
|
|
entrysize = <value>
|
|
data entry size in bytes
|
|
|
|
ustates = <value>
|
|
number of DTLB usage states (2, 3, 4 etc., max is 4)
|
|
|
|
hitdelay = <value>
|
|
number of cycles dmmu hit costs
|
|
|
|
missdelay = <value>
|
|
number of cycles dmmu miss costs
|
|
*/
|
|
|
|
section dmmu
|
|
enabled = 1
|
|
nsets = 64
|
|
nways = 1
|
|
pagesize = 8192
|
|
hitdelay = 0
|
|
missdelay = 0
|
|
end
|
|
|
|
|
|
/* IC SECTION
|
|
|
|
This section configures the Instruction Cache
|
|
|
|
enabled = 0/1
|
|
'0': disabled
|
|
'1': enabled
|
|
(NOTE: UPR bit is set)
|
|
|
|
nsets = <value>
|
|
number of IC sets; must be power of two
|
|
|
|
nways = <value>
|
|
number of IC ways
|
|
|
|
blocksize = <value>
|
|
IC block size in bytes; must be power of two
|
|
|
|
ustates = <value>
|
|
number of IC usage states (2, 3, 4 etc., max is 4)
|
|
|
|
hitdelay = <value>
|
|
number of cycles ic hit costs
|
|
|
|
missdelay = <value>
|
|
number of cycles ic miss costs
|
|
*/
|
|
|
|
section ic
|
|
enabled = 1
|
|
nsets = 512
|
|
nways = 1
|
|
blocksize = 16
|
|
hitdelay = 1
|
|
missdelay = 1
|
|
end
|
|
|
|
|
|
/* DC SECTION
|
|
|
|
This section configures the Data Cache
|
|
|
|
enabled = 0/1
|
|
'0': disabled
|
|
'1': enabled
|
|
(NOTE: UPR bit is set)
|
|
|
|
nsets = <value>
|
|
number of DC sets; must be power of two
|
|
|
|
nways = <value>
|
|
number of DC ways
|
|
|
|
blocksize = <value>
|
|
DC block size in bytes; must be power of two
|
|
|
|
ustates = <value>
|
|
number of DC usage states (2, 3, 4 etc., max is 4)
|
|
|
|
load_hitdelay = <value>
|
|
number of cycles dc load hit costs
|
|
|
|
load_missdelay = <value>
|
|
number of cycles dc load miss costs
|
|
|
|
store_hitdelay = <value>
|
|
number of cycles dc load hit costs
|
|
|
|
store_missdelay = <value>
|
|
number of cycles dc load miss costs
|
|
*/
|
|
|
|
section dc
|
|
enabled = 1
|
|
nsets = 512
|
|
nways = 1
|
|
blocksize = 16
|
|
load_hitdelay = 1
|
|
load_missdelay = 1
|
|
store_hitdelay = 1
|
|
store_missdelay = 1
|
|
end
|
|
|
|
|
|
/* SIM SECTION
|
|
|
|
This section specifies how or1ksim should behave.
|
|
|
|
verbose = 0/1
|
|
'0': don't print extra messages
|
|
'1': print extra messages
|
|
|
|
debug = 0-9
|
|
0 : no debug messages
|
|
1-9: debug message level.
|
|
higher numbers produce more messages
|
|
|
|
profile = 0/1
|
|
'0': don't generate profiling file 'sim.profile'
|
|
'1': don't generate profiling file 'sim.profile'
|
|
|
|
prof_fn = "<filename>"
|
|
optional filename for the profiling file.
|
|
valid only if 'profile' is set
|
|
|
|
mprofile = 0/1
|
|
'0': don't generate memory profiling file 'sim.mprofile'
|
|
'1': generate memory profiling file 'sim.mprofile'
|
|
|
|
mprof_fn = "<filename>"
|
|
optional filename for the memory profiling file.
|
|
valid only if 'mprofile' is set
|
|
|
|
history = 0/1
|
|
'0': don't track execution flow
|
|
'1': track execution flow
|
|
Execution flow can be tracked for the simulator's
|
|
'hist' command. Useful for back-trace debugging.
|
|
|
|
iprompt = 0/1
|
|
'0': start in <not interactive prompt> (so what do we start in ???)
|
|
'1': start in interactive prompt.
|
|
|
|
exe_log = 0/1
|
|
'0': don't generate execution log.
|
|
'1': generate execution log.
|
|
|
|
exe_log = default/hardware/simple/software
|
|
type of execution log, default is used when not specified
|
|
|
|
exe_log_start = <value>
|
|
index of first instruction to start logging, default = 0
|
|
|
|
exe_log_end = <value>
|
|
index of last instruction to end logging; not limited, if omitted
|
|
|
|
exe_log_marker = <value>
|
|
<value> specifies number of instructions before horizontal marker is
|
|
printed; if zero, markers are disabled (default)
|
|
|
|
exe_log_fn = "<filename>"
|
|
filename for the exection log file.
|
|
valid only if 'exe_log' is set
|
|
|
|
clkcycle = <value>[ps|ns|us|ms]
|
|
specifies time measurement for one cycle
|
|
*/
|
|
|
|
section sim
|
|
verbose = 1
|
|
debug = 0
|
|
profile = 0
|
|
history = 0
|
|
|
|
clkcycle = 10ns
|
|
end
|
|
|
|
|
|
/* SECTION VAPI
|
|
|
|
This section configures the Verification API, used for Advanced
|
|
Core Verification.
|
|
|
|
enabled = 0/1
|
|
'0': disbable VAPI server
|
|
'1': enable/start VAPI server
|
|
|
|
server_port = <value>
|
|
TCP/IP port to start VAPI server on
|
|
|
|
log_enabled = 0/1
|
|
'0': disable VAPI requests logging
|
|
'1': enable VAPI requests logging
|
|
|
|
hide_device_id = 0/1
|
|
'0': don't log device id (for compatability with old version)
|
|
'1': log device id
|
|
|
|
|
|
vapi_fn = <filename>
|
|
filename for the log file.
|
|
valid only if log_enabled is set
|
|
*/
|
|
|
|
section VAPI
|
|
enabled = 0
|
|
server_port = 9998
|
|
log_enabled = 0
|
|
vapi_log_fn = "vapi.log"
|
|
end
|
|
|
|
|
|
/* CPU SECTION
|
|
|
|
This section specifies various CPU parameters.
|
|
|
|
ver = <value>
|
|
rev = <value>
|
|
specifies version and revision of the CPU used
|
|
|
|
upr = <value>
|
|
changes the upr register
|
|
|
|
sr = <value>
|
|
sets the initial Supervision Register value
|
|
supervisor mode (SM) and fixed one (FO) set = 0x8001
|
|
exception prefix high (EPH, vectors@0xf0000000) = 0x4000
|
|
together, (SM | FO | EPH) = 0xc001
|
|
superscalar = 0/1
|
|
'0': CPU is scalar
|
|
'1': CPU is superscalar
|
|
(modify cpu/or32/execute.c to tune superscalar model)
|
|
|
|
hazards = 0/1
|
|
'0': don't track data hazards in superscalar CPU
|
|
'1': track data hazards in superscalar CPU
|
|
If tracked, data hazards can be displayed using the
|
|
simulator's 'r' command.
|
|
|
|
dependstats = 0/1
|
|
'0': don't calculate inter-instruction dependencies.
|
|
'1': calculate inter-instruction dependencies.
|
|
If calculated, inter-instruction dependencies can be
|
|
displayed using the simulator's 'stat' command.
|
|
|
|
sbuf_len = <value>
|
|
length of store buffer (<= 256), 0 = disabled
|
|
*/
|
|
|
|
section cpu
|
|
ver = 0x12
|
|
cfg = 0x00
|
|
rev = 0x01
|
|
sr = 0x8001 /*SPR_SR_FO | SPR_SR_SM | SPR_SR_EPH */
|
|
/* upr = */
|
|
superscalar = 0
|
|
hazards = 0
|
|
dependstats = 0
|
|
sbuf_len = 0
|
|
end
|
|
|
|
|
|
/* PM SECTION
|
|
|
|
This section specifies Power Management parameters
|
|
|
|
enabled = 0/1
|
|
'0': disable power management
|
|
'1': enable power management
|
|
*/
|
|
|
|
section pm
|
|
enabled = 0
|
|
end
|
|
|
|
|
|
/* BPB SECTION
|
|
|
|
This section specifies how branch prediction should behave.
|
|
|
|
enabled = 0/1
|
|
'0': disable branch prediction
|
|
'1': enable branch prediction
|
|
|
|
btic = 0/1
|
|
'0': disable branch target instruction cache model
|
|
'1': enable branch target instruction cache model
|
|
|
|
sbp_bf_fwd = 0/1
|
|
Static branch prediction for 'l.bf'
|
|
'0': don't use forward prediction
|
|
'1': use forward prediction
|
|
|
|
sbp_bnf_fwd = 0/1
|
|
Static branch prediction for 'l.bnf'
|
|
'0': don't use forward prediction
|
|
'1': use forward prediction
|
|
|
|
hitdelay = <value>
|
|
number of cycles bpb hit costs
|
|
|
|
missdelay = <value>
|
|
number of cycles bpb miss costs
|
|
*/
|
|
|
|
section bpb
|
|
enabled = 0
|
|
btic = 0
|
|
sbp_bf_fwd = 0
|
|
sbp_bnf_fwd = 0
|
|
hitdelay = 0
|
|
missdelay = 0
|
|
end
|
|
|
|
|
|
/* DEBUG SECTION
|
|
|
|
This sections specifies how the debug unit should behave.
|
|
|
|
enabled = 0/1
|
|
'0': disable debug unit
|
|
'1': enable debug unit
|
|
|
|
gdb_enabled = 0/1
|
|
'0': don't start gdb server
|
|
'1': start gdb server at port 'server_port'
|
|
|
|
server_port = <value>
|
|
TCP/IP port to start gdb server on
|
|
valid only if gdb_enabled is set
|
|
|
|
vapi_id = <hex_value>
|
|
Used to create "fake" vapi log file containing the JTAG proxy messages.
|
|
*/
|
|
section debug
|
|
enabled = 0
|
|
/* gdb_enabled = 0 */
|
|
/* server_port = 9999*/
|
|
rsp_enabled = 1
|
|
rsp_port = 50001
|
|
end
|
|
|
|
|
|
/* MC SECTION
|
|
|
|
This section configures the memory controller
|
|
|
|
enabled = 0/1
|
|
'0': disable memory controller
|
|
'1': enable memory controller
|
|
|
|
baseaddr = <hex_value>
|
|
address of first MC register
|
|
|
|
POC = <hex_value>
|
|
Power On Configuration register
|
|
|
|
index = <value>
|
|
Index of this memory controller amongst all the memory controllers
|
|
*/
|
|
|
|
section mc
|
|
enabled = 0
|
|
baseaddr = 0x93000000
|
|
POC = 0x00000008 /* Power on configuration register */
|
|
index = 0
|
|
end
|
|
|
|
|
|
/* UART SECTION
|
|
|
|
This section configures the UARTs
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr = <hex_value>
|
|
address of first UART register for this device
|
|
|
|
|
|
channel = <channeltype>:<args>
|
|
|
|
The channel parameter indicates the source of received UART characters
|
|
and the sink for transmitted UART characters.
|
|
|
|
The <channeltype> can be either "file", "xterm", "tcp", "fd", or "tty"
|
|
(without quotes).
|
|
|
|
A) To send/receive characters from a pair of files, use a file
|
|
channel:
|
|
|
|
channel=file:<rxfile>,<txfile>
|
|
|
|
B) To create an interactive terminal window, use an xterm channel:
|
|
|
|
channel=xterm:[<xterm_arg>]*
|
|
|
|
C) To create a bidirectional tcp socket which one could, for example,
|
|
access via telnet, use a tcp channel:
|
|
|
|
channel=tcp:<port number>
|
|
|
|
D) To cause the UART to read/write from existing numeric file
|
|
descriptors, use an fd channel:
|
|
|
|
channel=fd:<rx file descriptor num>,<tx file descriptor num>
|
|
|
|
E) To connect the UART to a physical serial port, create a tty
|
|
channel:
|
|
|
|
channel=tty:device=/dev/ttyS0,baud=9600
|
|
|
|
irq = <value>
|
|
irq number for this device
|
|
|
|
16550 = 0/1
|
|
'0': this device is a UART16450
|
|
'1': this device is a UART16550
|
|
|
|
jitter = <value>
|
|
in msecs... time to block, -1 to disable it
|
|
|
|
vapi_id = <hex_value>
|
|
VAPI id of this instance
|
|
*/
|
|
|
|
section uart
|
|
enabled = 1
|
|
baseaddr = 0x90000000
|
|
irq = 2
|
|
/* channel = "file:uart0.rx,uart0.tx" */
|
|
/* channel = "tcp:10084" */
|
|
channel = "xterm:"
|
|
jitter = -1 /* async behaviour */
|
|
16550 = 1
|
|
end
|
|
|
|
|
|
/* DMA SECTION
|
|
|
|
This section configures the DMAs
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr = <hex_value>
|
|
address of first DMA register for this device
|
|
|
|
irq = <value>
|
|
irq number for this device
|
|
|
|
vapi_id = <hex_value>
|
|
VAPI id of this instance
|
|
*/
|
|
|
|
section dma
|
|
enabled = 1
|
|
baseaddr = 0x9a000000
|
|
irq = 11
|
|
end
|
|
|
|
|
|
/* ETHERNET SECTION
|
|
|
|
This section configures the ETHERNETs
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr = <hex_value>
|
|
address of first ethernet register for this device
|
|
|
|
dma = <value>
|
|
which controller is this ethernet "connected" to
|
|
|
|
irq = <value>
|
|
ethernet mac IRQ level
|
|
|
|
rtx_type = <value>
|
|
use 0 - file interface, 1 - socket interface
|
|
|
|
rx_channel = <value>
|
|
DMA channel used for RX
|
|
|
|
tx_channel = <value>
|
|
DMA channel used for TX
|
|
|
|
rxfile = "<filename>"
|
|
filename, where to read data from
|
|
|
|
txfile = "<filename>"
|
|
filename, where to write data to
|
|
|
|
sockif = "<ifacename>"
|
|
interface name of ethernet socket
|
|
|
|
vapi_id = <hex_value>
|
|
VAPI id of this instance
|
|
*/
|
|
|
|
section ethernet
|
|
enabled = 1
|
|
baseaddr = 0x92000000
|
|
/* dma = 0 */
|
|
irq = 4
|
|
rtx_type = "tap"
|
|
tap_dev = "tap0"
|
|
/* tx_channel = 0 */
|
|
/* rx_channel = 1 */
|
|
rxfile = "eth0.rx"
|
|
txfile = "eth0.tx"
|
|
sockif = "eth0"
|
|
end
|
|
|
|
|
|
/* GPIO SECTION
|
|
|
|
This section configures the GPIOs
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr = <hex_value>
|
|
address of first GPIO register for this device
|
|
|
|
irq = <value>
|
|
irq number for this device
|
|
|
|
base_vapi_id = <hex_value>
|
|
first VAPI id of this instance
|
|
GPIO uses 8 consecutive VAPI IDs
|
|
*/
|
|
|
|
section gpio
|
|
enabled = 0
|
|
baseaddr = 0x91000000
|
|
irq = 3
|
|
base_vapi_id = 0x0200
|
|
end
|
|
|
|
/* VGA SECTION
|
|
|
|
This section configures the VGA/LCD controller
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr = <hex_value>
|
|
address of first VGA register
|
|
|
|
irq = <value>
|
|
irq number for this device
|
|
|
|
refresh_rate = <value>
|
|
number of cycles between screen dumps
|
|
|
|
filename = "<filename>"
|
|
template name for generated names (e.g. "primary" produces "primary0023.bmp")
|
|
*/
|
|
|
|
section vga
|
|
enabled = 0
|
|
baseaddr = 0x97100000
|
|
irq = 8
|
|
refresh_rate = 100000
|
|
filename = "primary"
|
|
end
|
|
|
|
|
|
/* TICK TIMER SECTION
|
|
|
|
This section configures tick timer
|
|
|
|
enabled = 0/1
|
|
whether tick timer is enabled
|
|
*/
|
|
|
|
section pic
|
|
enabled = 1
|
|
edge_trigger = 1
|
|
end
|
|
|
|
/* FB SECTION
|
|
|
|
This section configures the frame buffer
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
baseaddr = <hex_value>
|
|
base address of frame buffer
|
|
|
|
paladdr = <hex_value>
|
|
base address of first palette entry
|
|
|
|
refresh_rate = <value>
|
|
number of cycles between screen dumps
|
|
|
|
filename = "<filename>"
|
|
template name for generated names (e.g. "primary" produces "primary0023.bmp")
|
|
*/
|
|
|
|
section fb
|
|
enabled = 0
|
|
baseaddr = 0x97000000
|
|
refresh_rate = 1000000
|
|
filename = "primary"
|
|
end
|
|
|
|
|
|
/* KBD SECTION
|
|
|
|
This section configures the PS/2 compatible keyboard
|
|
|
|
baseaddr = <hex_value>
|
|
base address of the keyboard device
|
|
|
|
rxfile = "<filename>"
|
|
filename, where to read data from
|
|
*/
|
|
|
|
section kbd
|
|
enabled = 0
|
|
irq = 5
|
|
baseaddr = 0x94000000
|
|
rxfile = "kbd.rx"
|
|
end
|
|
|
|
|
|
/* ATA SECTION
|
|
|
|
This section configures the ATA/ATAPI host controller
|
|
|
|
baseaddr = <hex_value>
|
|
address of first ATA register
|
|
|
|
enabled = <0|1>
|
|
Enable/disable the peripheral. By default if it is enabled.
|
|
|
|
irq = <value>
|
|
irq number for this device
|
|
|
|
debug = <value>
|
|
debug level for ata models.
|
|
0: no debug messages
|
|
1: verbose messages
|
|
3: normal messages (more messages than verbose)
|
|
5: debug messages (normal debug messages)
|
|
7: flow control messages (debug statemachine flows)
|
|
9: low priority message (display everything the code does)
|
|
|
|
dev_type0/1 = <value>
|
|
ata device 0 type
|
|
0: NO_CONNeCT: none (not connected)
|
|
1: FILE : simulated harddisk
|
|
2: LOCAL : local system harddisk
|
|
|
|
dev_file0/1 = "<filename>"
|
|
filename for simulated ATA device
|
|
valid only if dev_type0 == 1
|
|
|
|
dev_size0/1 = <value>
|
|
size of simulated hard-disk (in MBytes)
|
|
valid only if dev_type0 == 1
|
|
|
|
dev_packet0/1 = <value>
|
|
0: simulated ATA device does NOT implement PACKET command feature set
|
|
1: simulated ATA device does implement PACKET command feature set
|
|
|
|
FIXME: irq number
|
|
*/
|
|
|
|
section ata
|
|
enabled = 0
|
|
baseaddr = 0x9e000000
|
|
irq = 15
|
|
|
|
end
|