u-boot/arch/arm/dts/fsl-ls2080a.dtsi
Kuldeep Singh b480bcca80 treewide: Update fsl qspi node dt properties as per spi-mem driver
According to new qspi driver, some properties like "bus-num, num-cs,
big-endian" are no longer used. Device endiannes can be determined from
device-type data in driver.

Now use board specific compatibles, generic node names and specific
labels to align with linux device-tree properties.

Also consolidate spi-max-frequency to 50Mhz treewide.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>
2020-05-19 09:22:05 +05:30

281 lines
7.3 KiB
Text

// SPDX-License-Identifier: GPL-2.0+ OR X11
/*
* Freescale ls2080a SOC common device tree source
*
* Copyright 2013-2015 Freescale Semiconductor, Inc.
*/
/ {
compatible = "fsl,ls2080a";
interrupt-parent = <&gic>;
#address-cells = <2>;
#size-cells = <2>;
memory@80000000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0 0x80000000>;
/* DRAM space - 1, size : 2 GB DRAM */
};
gic: interrupt-controller@6000000 {
compatible = "arm,gic-v3";
reg = <0x0 0x06000000 0 0x10000>, /* GIC Dist */
<0x0 0x06100000 0 0x100000>; /* GICR (RD_base + SGI_base) */
#interrupt-cells = <3>;
interrupt-controller;
interrupts = <1 9 0x4>;
};
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0x8>, /* Physical Secure PPI, active-low */
<1 14 0x8>, /* Physical Non-Secure PPI, active-low */
<1 11 0x8>, /* Virtual PPI, active-low */
<1 10 0x8>; /* Hypervisor PPI, active-low */
};
serial0: serial@21c0500 {
device_type = "serial";
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0500 0x0 0x100>;
clock-frequency = <0>; /* Updated by bootloader */
interrupts = <0 32 0x1>; /* edge triggered */
};
serial1: serial@21c0600 {
device_type = "serial";
compatible = "fsl,ns16550", "ns16550a";
reg = <0x0 0x21c0600 0x0 0x100>;
clock-frequency = <0>; /* Updated by bootloader */
interrupts = <0 32 0x1>; /* edge triggered */
};
i2c0: i2c@2000000 {
status = "disabled";
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2000000 0x0 0x10000>;
interrupts = <0 34 0x4>; /* Level high type */
};
i2c1: i2c@2010000 {
status = "disabled";
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2010000 0x0 0x10000>;
interrupts = <0 34 0x4>; /* Level high type */
};
i2c2: i2c@2020000 {
status = "disabled";
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2020000 0x0 0x10000>;
interrupts = <0 35 0x4>; /* Level high type */
};
i2c3: i2c@2030000 {
status = "disabled";
compatible = "fsl,vf610-i2c";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2030000 0x0 0x10000>;
interrupts = <0 35 0x4>; /* Level high type */
};
dspi: dspi@2100000 {
compatible = "fsl,vf610-dspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x2100000 0x0 0x10000>;
interrupts = <0 26 0x4>; /* Level high type */
num-cs = <6>;
};
qspi: quadspi@1550000 {
compatible = "fsl,ls2080a-qspi";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x0 0x20c0000 0x0 0x10000>,
<0x0 0x20000000 0x0 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
status = "disabled";
};
esdhc: esdhc@0 {
compatible = "fsl,esdhc";
reg = <0x0 0x2140000 0x0 0x10000>;
interrupts = <0 28 0x4>; /* Level high type */
little-endian;
bus-width = <4>;
};
usb0: usb3@3100000 {
compatible = "fsl,layerscape-dwc3";
reg = <0x0 0x3100000 0x0 0x10000>;
interrupts = <0 80 0x4>; /* Level high type */
dr_mode = "host";
};
usb1: usb3@3110000 {
compatible = "fsl,layerscape-dwc3";
reg = <0x0 0x3110000 0x0 0x10000>;
interrupts = <0 81 0x4>; /* Level high type */
dr_mode = "host";
};
pcie@3400000 {
compatible = "fsl,ls-pcie", "snps,dw-pcie";
reg = <0x00 0x03400000 0x0 0x80000 /* dbi registers */
0x00 0x03480000 0x0 0x80000 /* lut registers */
0x10 0x00000000 0x0 0x20000>; /* configuration space */
reg-names = "dbi", "lut", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x10 0x00020000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x10 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
pcie@3500000 {
compatible = "fsl,ls-pcie", "snps,dw-pcie";
reg = <0x00 0x03500000 0x0 0x80000 /* dbi registers */
0x00 0x03580000 0x0 0x80000 /* lut registers */
0x12 0x00000000 0x0 0x20000>; /* configuration space */
reg-names = "dbi", "lut", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x12 0x00020000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x12 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
pcie@3600000 {
compatible = "fsl,ls-pcie", "snps,dw-pcie";
reg = <0x00 0x03600000 0x0 0x80000 /* dbi registers */
0x00 0x03680000 0x0 0x80000 /* lut registers */
0x14 0x00000000 0x0 0x20000>; /* configuration space */
reg-names = "dbi", "lut", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <8>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x14 0x00020000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x14 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
pcie@3700000 {
compatible = "fsl,ls-pcie", "snps,dw-pcie";
reg = <0x00 0x03700000 0x0 0x80000 /* dbi registers */
0x00 0x03780000 0x0 0x80000 /* lut registers */
0x16 0x00000000 0x0 0x20000>; /* configuration space */
reg-names = "dbi", "lut", "config";
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
num-lanes = <4>;
bus-range = <0x0 0xff>;
ranges = <0x81000000 0x0 0x00000000 0x16 0x00020000 0x0 0x00010000 /* downstream I/O */
0x82000000 0x0 0x40000000 0x16 0x40000000 0x0 0x40000000>; /* non-prefetchable memory */
};
sata: sata@3200000 {
compatible = "fsl,ls2080a-ahci";
reg = <0x0 0x3200000 0x0 0x10000>;
interrupts = <0 133 0x4>; /* Level high type */
status = "disabled";
};
fsl_mc: fsl-mc@80c000000 {
compatible = "fsl,qoriq-mc", "simple-mfd";
reg = <0x00000008 0x0c000000 0 0x40>, /* MC portal base */
<0x00000000 0x08340000 0 0x40000>; /* MC control reg */
#address-cells = <3>;
#size-cells = <1>;
/*
* Region type 0x0 - MC portals
* Region type 0x1 - QBMAN portals
*/
ranges = <0x0 0x0 0x0 0x8 0x0c000000 0x4000000
0x1 0x0 0x0 0x8 0x18000000 0x8000000>;
dpmacs {
compatible = "simple-mfd";
#address-cells = <1>;
#size-cells = <0>;
dpmac1: dpmac@1 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x1>;
status = "disabled";
};
dpmac2: dpmac@2 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x2>;
status = "disabled";
};
dpmac3: dpmac@3 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x3>;
status = "disabled";
};
dpmac4: dpmac@4 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x4>;
status = "disabled";
};
dpmac5: dpmac@5 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x5>;
status = "disabled";
};
dpmac6: dpmac@6 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x6>;
status = "disabled";
};
dpmac7: dpmac@7 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x7>;
status = "disabled";
};
dpmac8: dpmac@8 {
compatible = "fsl,qoriq-mc-dpmac";
reg = <0x8>;
status = "disabled";
};
};
};
emdio1: mdio@8B96000 {
compatible = "fsl,ls-mdio";
reg = <0x0 0x8B96000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
emdio2: mdio@8B97000 {
compatible = "fsl,ls-mdio";
reg = <0x0 0x8B97000 0x0 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};