mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 15:37:23 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
387 lines
9.2 KiB
Text
387 lines
9.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Xilinx Zynq 7000 DTSI
|
|
* Describes the hardware common to all Zynq 7000-based boards.
|
|
*
|
|
* Copyright (C) 2011 - 2015 Xilinx
|
|
*/
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "xlnx,zynq-7000";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu0: cpu@0 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
clocks = <&clkc 3>;
|
|
clock-latency = <1000>;
|
|
cpu0-supply = <®ulator_vccpint>;
|
|
operating-points = <
|
|
/* kHz uV */
|
|
666667 1000000
|
|
333334 1000000
|
|
>;
|
|
};
|
|
|
|
cpu1: cpu@1 {
|
|
compatible = "arm,cortex-a9";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
clocks = <&clkc 3>;
|
|
};
|
|
};
|
|
|
|
fpga_full: fpga-full {
|
|
compatible = "fpga-region";
|
|
fpga-mgr = <&devcfg>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
};
|
|
|
|
pmu@f8891000 {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts = <0 5 4>, <0 6 4>;
|
|
interrupt-parent = <&intc>;
|
|
reg = <0xf8891000 0x1000>,
|
|
<0xf8893000 0x1000>;
|
|
};
|
|
|
|
regulator_vccpint: fixedregulator {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VCCPINT";
|
|
regulator-min-microvolt = <1000000>;
|
|
regulator-max-microvolt = <1000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
amba: amba {
|
|
u-boot,dm-pre-reloc;
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-parent = <&intc>;
|
|
ranges;
|
|
|
|
adc: adc@f8007100 {
|
|
compatible = "xlnx,zynq-xadc-1.00.a";
|
|
reg = <0xf8007100 0x20>;
|
|
interrupts = <0 7 4>;
|
|
interrupt-parent = <&intc>;
|
|
clocks = <&clkc 12>;
|
|
};
|
|
|
|
can0: can@e0008000 {
|
|
compatible = "xlnx,zynq-can-1.0";
|
|
status = "disabled";
|
|
clocks = <&clkc 19>, <&clkc 36>;
|
|
clock-names = "can_clk", "pclk";
|
|
reg = <0xe0008000 0x1000>;
|
|
interrupts = <0 28 4>;
|
|
interrupt-parent = <&intc>;
|
|
tx-fifo-depth = <0x40>;
|
|
rx-fifo-depth = <0x40>;
|
|
};
|
|
|
|
can1: can@e0009000 {
|
|
compatible = "xlnx,zynq-can-1.0";
|
|
status = "disabled";
|
|
clocks = <&clkc 20>, <&clkc 37>;
|
|
clock-names = "can_clk", "pclk";
|
|
reg = <0xe0009000 0x1000>;
|
|
interrupts = <0 51 4>;
|
|
interrupt-parent = <&intc>;
|
|
tx-fifo-depth = <0x40>;
|
|
rx-fifo-depth = <0x40>;
|
|
};
|
|
|
|
gpio0: gpio@e000a000 {
|
|
compatible = "xlnx,zynq-gpio-1.0";
|
|
#gpio-cells = <2>;
|
|
clocks = <&clkc 42>;
|
|
gpio-controller;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 20 4>;
|
|
reg = <0xe000a000 0x1000>;
|
|
};
|
|
|
|
i2c0: i2c@e0004000 {
|
|
compatible = "cdns,i2c-r1p10";
|
|
status = "disabled";
|
|
clocks = <&clkc 38>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 25 4>;
|
|
reg = <0xe0004000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c1: i2c@e0005000 {
|
|
compatible = "cdns,i2c-r1p10";
|
|
status = "disabled";
|
|
clocks = <&clkc 39>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 48 4>;
|
|
reg = <0xe0005000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
intc: interrupt-controller@f8f01000 {
|
|
compatible = "arm,cortex-a9-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0xF8F01000 0x1000>,
|
|
<0xF8F00100 0x100>;
|
|
};
|
|
|
|
L2: cache-controller@f8f02000 {
|
|
compatible = "arm,pl310-cache";
|
|
reg = <0xF8F02000 0x1000>;
|
|
interrupts = <0 2 4>;
|
|
arm,data-latency = <3 2 2>;
|
|
arm,tag-latency = <2 2 2>;
|
|
cache-unified;
|
|
cache-level = <2>;
|
|
};
|
|
|
|
mc: memory-controller@f8006000 {
|
|
compatible = "xlnx,zynq-ddrc-a05";
|
|
reg = <0xf8006000 0x1000>;
|
|
};
|
|
|
|
uart0: serial@e0000000 {
|
|
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
|
|
status = "disabled";
|
|
clocks = <&clkc 23>, <&clkc 40>;
|
|
clock-names = "uart_clk", "pclk";
|
|
reg = <0xE0000000 0x1000>;
|
|
interrupts = <0 27 4>;
|
|
};
|
|
|
|
uart1: serial@e0001000 {
|
|
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
|
|
status = "disabled";
|
|
clocks = <&clkc 24>, <&clkc 41>;
|
|
clock-names = "uart_clk", "pclk";
|
|
reg = <0xE0001000 0x1000>;
|
|
interrupts = <0 50 4>;
|
|
};
|
|
|
|
spi0: spi@e0006000 {
|
|
compatible = "xlnx,zynq-spi-r1p6";
|
|
reg = <0xe0006000 0x1000>;
|
|
status = "disabled";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 26 4>;
|
|
clocks = <&clkc 25>, <&clkc 34>;
|
|
clock-names = "ref_clk", "pclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spi1: spi@e0007000 {
|
|
compatible = "xlnx,zynq-spi-r1p6";
|
|
reg = <0xe0007000 0x1000>;
|
|
status = "disabled";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 49 4>;
|
|
clocks = <&clkc 26>, <&clkc 35>;
|
|
clock-names = "ref_clk", "pclk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
qspi: spi@e000d000 {
|
|
clock-names = "ref_clk", "pclk";
|
|
clocks = <&clkc 10>, <&clkc 43>;
|
|
compatible = "xlnx,zynq-qspi-1.0";
|
|
status = "disabled";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 19 4>;
|
|
reg = <0xe000d000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
gem0: ethernet@e000b000 {
|
|
compatible = "cdns,zynq-gem", "cdns,gem";
|
|
reg = <0xe000b000 0x1000>;
|
|
status = "disabled";
|
|
interrupts = <0 22 4>;
|
|
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
|
|
clock-names = "pclk", "hclk", "tx_clk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
gem1: ethernet@e000c000 {
|
|
compatible = "cdns,zynq-gem", "cdns,gem";
|
|
reg = <0xe000c000 0x1000>;
|
|
status = "disabled";
|
|
interrupts = <0 45 4>;
|
|
clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
|
|
clock-names = "pclk", "hclk", "tx_clk";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
sdhci0: sdhci@e0100000 {
|
|
compatible = "arasan,sdhci-8.9a";
|
|
status = "disabled";
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <&clkc 21>, <&clkc 32>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 24 4>;
|
|
reg = <0xe0100000 0x1000>;
|
|
};
|
|
|
|
sdhci1: sdhci@e0101000 {
|
|
compatible = "arasan,sdhci-8.9a";
|
|
status = "disabled";
|
|
clock-names = "clk_xin", "clk_ahb";
|
|
clocks = <&clkc 22>, <&clkc 33>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 47 4>;
|
|
reg = <0xe0101000 0x1000>;
|
|
};
|
|
|
|
slcr: slcr@f8000000 {
|
|
u-boot,dm-pre-reloc;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "xlnx,zynq-slcr", "syscon", "simple-mfd";
|
|
reg = <0xF8000000 0x1000>;
|
|
ranges;
|
|
clkc: clkc@100 {
|
|
u-boot,dm-pre-reloc;
|
|
#clock-cells = <1>;
|
|
compatible = "xlnx,ps7-clkc";
|
|
fclk-enable = <0>;
|
|
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
|
|
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
|
|
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
|
|
"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
|
|
"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
|
|
"dma", "usb0_aper", "usb1_aper", "gem0_aper",
|
|
"gem1_aper", "sdio0_aper", "sdio1_aper",
|
|
"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
|
|
"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
|
|
"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
|
|
"dbg_trc", "dbg_apb";
|
|
reg = <0x100 0x100>;
|
|
};
|
|
|
|
rstc: rstc@200 {
|
|
compatible = "xlnx,zynq-reset";
|
|
reg = <0x200 0x48>;
|
|
#reset-cells = <1>;
|
|
syscon = <&slcr>;
|
|
};
|
|
|
|
pinctrl0: pinctrl@700 {
|
|
compatible = "xlnx,pinctrl-zynq";
|
|
reg = <0x700 0x200>;
|
|
syscon = <&slcr>;
|
|
};
|
|
};
|
|
|
|
dmac_s: dmac@f8003000 {
|
|
compatible = "arm,pl330", "arm,primecell";
|
|
reg = <0xf8003000 0x1000>;
|
|
interrupt-parent = <&intc>;
|
|
interrupt-names = "abort", "dma0", "dma1", "dma2", "dma3",
|
|
"dma4", "dma5", "dma6", "dma7";
|
|
interrupts = <0 13 4>,
|
|
<0 14 4>, <0 15 4>,
|
|
<0 16 4>, <0 17 4>,
|
|
<0 40 4>, <0 41 4>,
|
|
<0 42 4>, <0 43 4>;
|
|
#dma-cells = <1>;
|
|
#dma-channels = <8>;
|
|
#dma-requests = <4>;
|
|
clocks = <&clkc 27>;
|
|
clock-names = "apb_pclk";
|
|
};
|
|
|
|
devcfg: devcfg@f8007000 {
|
|
compatible = "xlnx,zynq-devcfg-1.0";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 8 4>;
|
|
reg = <0xf8007000 0x100>;
|
|
clocks = <&clkc 12>, <&clkc 15>, <&clkc 16>, <&clkc 17>, <&clkc 18>;
|
|
clock-names = "ref_clk", "fclk0", "fclk1", "fclk2", "fclk3";
|
|
syscon = <&slcr>;
|
|
};
|
|
|
|
global_timer: timer@f8f00200 {
|
|
compatible = "arm,cortex-a9-global-timer";
|
|
reg = <0xf8f00200 0x20>;
|
|
interrupts = <1 11 0x301>;
|
|
interrupt-parent = <&intc>;
|
|
clocks = <&clkc 4>;
|
|
};
|
|
|
|
ttc0: timer@f8001000 {
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 10 4>, <0 11 4>, <0 12 4>;
|
|
compatible = "cdns,ttc";
|
|
clocks = <&clkc 6>;
|
|
reg = <0xF8001000 0x1000>;
|
|
};
|
|
|
|
ttc1: timer@f8002000 {
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 37 4>, <0 38 4>, <0 39 4>;
|
|
compatible = "cdns,ttc";
|
|
clocks = <&clkc 6>;
|
|
reg = <0xF8002000 0x1000>;
|
|
};
|
|
|
|
scutimer: timer@f8f00600 {
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <1 13 0x301>;
|
|
compatible = "arm,cortex-a9-twd-timer";
|
|
reg = <0xf8f00600 0x20>;
|
|
clocks = <&clkc 4>;
|
|
};
|
|
|
|
usb0: usb@e0002000 {
|
|
compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
|
|
status = "disabled";
|
|
clocks = <&clkc 28>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 21 4>;
|
|
reg = <0xe0002000 0x1000>;
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
usb1: usb@e0003000 {
|
|
compatible = "xlnx,zynq-usb-2.20a", "chipidea,usb2";
|
|
status = "disabled";
|
|
clocks = <&clkc 29>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 44 4>;
|
|
reg = <0xe0003000 0x1000>;
|
|
phy_type = "ulpi";
|
|
};
|
|
|
|
watchdog0: watchdog@f8005000 {
|
|
clocks = <&clkc 45>;
|
|
compatible = "cdns,wdt-r1p2";
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <0 9 1>;
|
|
reg = <0xf8005000 0x1000>;
|
|
timeout-sec = <10>;
|
|
};
|
|
};
|
|
};
|