u-boot/post/cpu/ppc4xx/ether.c
Robert P. J. Day 62a3b7dd08 Various, unrelated tree-wide typo fixes.
Fix a number of typos, including:

     * "compatble" -> "compatible"
     * "eanbeld" -> "enabled"
     * "envrionment" -> "environment"
     * "FTD" -> "FDT" (for "flattened device tree")
     * "ommitted" -> "omitted"
     * "overriden" -> "overridden"
     * "partiton" -> "partition"
     * "propogate" -> "propagate"
     * "resourse" -> "resource"
     * "rest in piece" -> "rest in peace"
     * "suport" -> "support"
     * "varible" -> "variable"

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
2016-07-16 09:43:12 -04:00

419 lines
11 KiB
C

/*
* (C) Copyright 2007
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* Author: Igor Lisitsin <igor@emcraft.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
/*
* Ethernet test
*
* The Ethernet Media Access Controllers (EMAC) are tested in the
* internal loopback mode.
* The controllers are configured accordingly and several packets
* are transmitted. The configurable test parameters are:
* MIN_PACKET_LENGTH - minimum size of packet to transmit
* MAX_PACKET_LENGTH - maximum size of packet to transmit
* CONFIG_SYS_POST_ETH_LOOPS - Number of test loops. Each loop
* is tested with a different frame length. Starting with
* MAX_PACKET_LENGTH and going down to MIN_PACKET_LENGTH.
* Defaults to 10 and can be overridden in the board config header.
*/
#include <post.h>
#if CONFIG_POST & CONFIG_SYS_POST_ETHER
#include <asm/cache.h>
#include <asm/io.h>
#include <asm/processor.h>
#include <asm/ppc4xx-mal.h>
#include <asm/ppc4xx-emac.h>
#include <malloc.h>
DECLARE_GLOBAL_DATA_PTR;
/*
* Get count of EMAC devices (doesn't have to be the max. possible number
* supported by the cpu)
*
* CONFIG_BOARD_EMAC_COUNT added so now a "dynamic" way to configure the
* EMAC count is possible. As it is needed for the Kilauea/Haleakala
* 405EX/405EXr eval board, using the same binary.
*/
#if defined(CONFIG_BOARD_EMAC_COUNT)
#define LAST_EMAC_NUM board_emac_count()
#else /* CONFIG_BOARD_EMAC_COUNT */
#if defined(CONFIG_HAS_ETH3)
#define LAST_EMAC_NUM 4
#elif defined(CONFIG_HAS_ETH2)
#define LAST_EMAC_NUM 3
#elif defined(CONFIG_HAS_ETH1)
#define LAST_EMAC_NUM 2
#else
#define LAST_EMAC_NUM 1
#endif
#endif /* CONFIG_BOARD_EMAC_COUNT */
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
#define SDR0_MFR_ETH_CLK_SEL_V(n) ((0x01<<27) / (n+1))
#endif
#define MIN_PACKET_LENGTH 64
#define MAX_PACKET_LENGTH 1514
#ifndef CONFIG_SYS_POST_ETH_LOOPS
#define CONFIG_SYS_POST_ETH_LOOPS 10
#endif
#define PACKET_INCR ((MAX_PACKET_LENGTH - MIN_PACKET_LENGTH) / \
CONFIG_SYS_POST_ETH_LOOPS)
static volatile mal_desc_t tx __cacheline_aligned;
static volatile mal_desc_t rx __cacheline_aligned;
static char *tx_buf;
static char *rx_buf;
int board_emac_count(void);
static void ether_post_init (int devnum, int hw_addr)
{
int i;
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
unsigned mode_reg;
sys_info_t sysinfo;
#endif
#if defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || defined(CONFIG_440SPE)
unsigned long mfr;
#endif
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* Need to get the OPB frequency so we can access the PHY */
get_sys_info (&sysinfo);
#endif
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* provide clocks for EMAC internal loopback */
mfsdr (SDR0_MFR, mfr);
mfr |= SDR0_MFR_ETH_CLK_SEL_V(devnum);
mtsdr (SDR0_MFR, mfr);
sync ();
#endif
/* reset emac */
out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST);
sync ();
for (i = 0;; i++) {
if (!(in_be32 ((void*)(EMAC0_MR0 + hw_addr)) & EMAC_MR0_SRST))
break;
if (i >= 1000) {
printf ("Timeout resetting EMAC\n");
break;
}
udelay (1000);
}
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
/* Whack the M1 register */
mode_reg = 0x0;
if (sysinfo.freqOPB <= 50000000);
else if (sysinfo.freqOPB <= 66666667)
mode_reg |= EMAC_MR1_OBCI_66;
else if (sysinfo.freqOPB <= 83333333)
mode_reg |= EMAC_MR1_OBCI_83;
else if (sysinfo.freqOPB <= 100000000)
mode_reg |= EMAC_MR1_OBCI_100;
else
mode_reg |= EMAC_MR1_OBCI_GT100;
out_be32 ((void*)(EMAC0_MR1 + hw_addr), mode_reg);
#endif /* defined(CONFIG_440GX) || defined(CONFIG_440SP) */
/* set the Mal configuration reg */
#if defined(CONFIG_440GX) || \
defined(CONFIG_440EPX) || defined(CONFIG_440GRX) || \
defined(CONFIG_440SP) || defined(CONFIG_440SPE)
mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA |
MAL_CR_PLBLT_DEFAULT | 0x00330000);
#else
mtdcr (MAL0_CFG, MAL_CR_PLBB | MAL_CR_OPBBL | MAL_CR_LEA | MAL_CR_PLBLT_DEFAULT);
/* Errata 1.12: MAL_1 -- Disable MAL bursting */
if (get_pvr() == PVR_440GP_RB) {
mtdcr (MAL0_CFG, mfdcr(MAL0_CFG) & ~MAL_CR_PLBB);
}
#endif
/* setup buffer descriptors */
tx.ctrl = MAL_TX_CTRL_WRAP;
tx.data_len = 0;
tx.data_ptr = (char*)L1_CACHE_ALIGN((u32)tx_buf);
rx.ctrl = MAL_TX_CTRL_WRAP | MAL_RX_CTRL_EMPTY;
rx.data_len = 0;
rx.data_ptr = (char*)L1_CACHE_ALIGN((u32)rx_buf);
flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
switch (devnum) {
case 1:
/* setup MAL tx & rx channel pointers */
#if defined (CONFIG_405EP) || defined (CONFIG_440EP) || defined (CONFIG_440GR)
mtdcr (MAL0_TXCTP2R, &tx);
#else
mtdcr (MAL0_TXCTP1R, &tx);
#endif
#if defined(CONFIG_440)
mtdcr (MAL0_TXBADDR, 0x0);
mtdcr (MAL0_RXBADDR, 0x0);
#endif
mtdcr (MAL0_RXCTP1R, &rx);
/* set RX buffer size */
mtdcr (MAL0_RCBS1, PKTSIZE_ALIGN / 16);
break;
case 0:
default:
/* setup MAL tx & rx channel pointers */
#if defined(CONFIG_440)
mtdcr (MAL0_TXBADDR, 0x0);
mtdcr (MAL0_RXBADDR, 0x0);
#endif
mtdcr (MAL0_TXCTP0R, &tx);
mtdcr (MAL0_RXCTP0R, &rx);
/* set RX buffer size */
mtdcr (MAL0_RCBS0, PKTSIZE_ALIGN / 16);
break;
}
/* Enable MAL transmit and receive channels */
#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> (devnum*2)));
#else
mtdcr (MAL0_TXCASR, (MAL_TXRX_CASR >> devnum));
#endif
mtdcr (MAL0_RXCASR, (MAL_TXRX_CASR >> devnum));
/* set internal loopback mode */
#ifdef CONFIG_SYS_POST_ETHER_EXT_LOOPBACK
out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | 0 |
EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K |
EMAC_MR1_MF_100MBPS | EMAC_MR1_IST |
in_be32 ((void*)(EMAC0_MR1 + hw_addr)));
#else
out_be32 ((void*)(EMAC0_MR1 + hw_addr), EMAC_MR1_FDE | EMAC_MR1_ILE |
EMAC_MR1_RFS_4K | EMAC_MR1_TX_FIFO_2K |
EMAC_MR1_MF_100MBPS | EMAC_MR1_IST |
in_be32 ((void*)(EMAC0_MR1 + hw_addr)));
#endif
/* set transmit enable & receive enable */
out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_TXE | EMAC_MR0_RXE);
/* enable broadcast address */
out_be32 ((void*)(EMAC0_RXM + hw_addr), EMAC_RMR_BAE);
/* set transmit request threshold register */
out_be32 ((void*)(EMAC0_TRTR + hw_addr), 0x18000000); /* 256 byte threshold */
/* set receive low/high water mark register */
#if defined(CONFIG_440)
/* 440s has a 64 byte burst length */
out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x80009000);
#else
/* 405s have a 16 byte burst length */
out_be32 ((void*)(EMAC0_RX_HI_LO_WMARK + hw_addr), 0x0f002000);
#endif /* defined(CONFIG_440) */
out_be32 ((void*)(EMAC0_TMR1 + hw_addr), 0xf8640000);
/* Set fifo limit entry in tx mode 0 */
out_be32 ((void*)(EMAC0_TMR0 + hw_addr), 0x00000003);
/* Frame gap set */
out_be32 ((void*)(EMAC0_I_FRAME_GAP_REG + hw_addr), 0x00000008);
sync ();
}
static void ether_post_halt (int devnum, int hw_addr)
{
int i = 0;
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
unsigned long mfr;
#endif
/* 1st reset MAL channel */
/* Note: writing a 0 to a channel has no effect */
#if defined(CONFIG_405EP) || defined(CONFIG_440EP) || defined(CONFIG_440GR)
mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> (devnum * 2));
#else
mtdcr (MAL0_TXCARR, MAL_TXRX_CASR >> devnum);
#endif
mtdcr (MAL0_RXCARR, MAL_TXRX_CASR >> devnum);
/* wait for reset */
while (mfdcr (MAL0_RXCASR) & (MAL_TXRX_CASR >> devnum)) {
if (i++ >= 1000)
break;
udelay (1000);
}
/* emac reset */
out_be32 ((void*)(EMAC0_MR0 + hw_addr), EMAC_MR0_SRST);
#if defined(CONFIG_440SPE) || defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
/* remove clocks for EMAC internal loopback */
mfsdr (SDR0_MFR, mfr);
mfr &= ~SDR0_MFR_ETH_CLK_SEL_V(devnum);
mtsdr (SDR0_MFR, mfr);
#endif
}
static void ether_post_send (int devnum, int hw_addr, void *packet, int length)
{
int i = 0;
while (tx.ctrl & MAL_TX_CTRL_READY) {
if (i++ > 100) {
printf ("TX timeout\n");
return;
}
udelay (1000);
invalidate_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
}
tx.ctrl = MAL_TX_CTRL_READY | MAL_TX_CTRL_WRAP | MAL_TX_CTRL_LAST |
EMAC_TX_CTRL_GFCS | EMAC_TX_CTRL_GP;
tx.data_len = length;
memcpy (tx.data_ptr, packet, length);
flush_dcache_range((u32)&tx, (u32)&tx + sizeof(mal_desc_t));
flush_dcache_range((u32)tx.data_ptr, (u32)tx.data_ptr + length);
sync ();
out_be32 ((void*)(EMAC0_TMR0 + hw_addr), in_be32 ((void*)(EMAC0_TMR0 + hw_addr)) | EMAC_TMR0_GNP0);
sync ();
}
static int ether_post_recv (int devnum, int hw_addr, void *packet, int max_length)
{
int length;
int i = 0;
while (rx.ctrl & MAL_RX_CTRL_EMPTY) {
if (i++ > 100) {
printf ("RX timeout\n");
return 0;
}
udelay (1000);
invalidate_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
}
length = rx.data_len - 4;
if (length <= max_length) {
invalidate_dcache_range((u32)rx.data_ptr, (u32)rx.data_ptr + length);
memcpy(packet, rx.data_ptr, length);
}
sync ();
rx.ctrl |= MAL_RX_CTRL_EMPTY;
flush_dcache_range((u32)&rx, (u32)&rx + sizeof(mal_desc_t));
sync ();
return length;
}
/*
* Test routines
*/
static void packet_fill (char *packet, int length)
{
char c = (char) length;
int i;
/* set up ethernet header */
memset (packet, 0xff, 14);
for (i = 14; i < length; i++) {
packet[i] = c++;
}
}
static int packet_check (char *packet, int length)
{
char c = (char) length;
int i;
for (i = 14; i < length; i++) {
if (packet[i] != c++)
return -1;
}
return 0;
}
char packet_send[MAX_PACKET_LENGTH];
char packet_recv[MAX_PACKET_LENGTH];
static int test_ctlr (int devnum, int hw_addr)
{
int res = -1;
int length;
int l;
ether_post_init (devnum, hw_addr);
for (l = MAX_PACKET_LENGTH; l >= MIN_PACKET_LENGTH;
l -= PACKET_INCR) {
packet_fill (packet_send, l);
ether_post_send (devnum, hw_addr, packet_send, l);
length = ether_post_recv (devnum, hw_addr, packet_recv,
sizeof (packet_recv));
if (length != l || packet_check (packet_recv, length) < 0) {
goto Done;
}
}
res = 0;
Done:
ether_post_halt (devnum, hw_addr);
if (res != 0) {
post_log ("EMAC%d test failed\n", devnum);
}
return res;
}
int ether_post_test (int flags)
{
int res = 0;
int i;
/* Allocate tx & rx packet buffers */
tx_buf = malloc (PKTSIZE_ALIGN + CONFIG_SYS_CACHELINE_SIZE);
rx_buf = malloc (PKTSIZE_ALIGN + CONFIG_SYS_CACHELINE_SIZE);
if (!tx_buf || !rx_buf) {
printf ("Failed to allocate packet buffers\n");
res = -1;
goto out_free;
}
for (i = 0; i < LAST_EMAC_NUM; i++) {
if (test_ctlr (i, i*0x100))
res = -1;
}
out_free:
free (tx_buf);
free (rx_buf);
return res;
}
#endif /* CONFIG_POST & CONFIG_SYS_POST_ETHER */