u-boot/drivers/pinctrl/rockchip/pinctrl-rv1108.c
David Wu 623aca8830 pinctrl: rockchip: Clean the unused type and label
As the mux/pull/drive feature implement at own file,
the type and label are not necessary.

Signed-off-by: David Wu <david.wu@rock-chips.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
2019-05-08 17:34:12 +08:00

281 lines
6.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2019 Rockchip Electronics Co., Ltd
*/
#include <common.h>
#include <dm.h>
#include <dm/pinctrl.h>
#include <regmap.h>
#include <syscon.h>
#include "pinctrl-rockchip.h"
static struct rockchip_mux_recalced_data rv1108_mux_recalced_data[] = {
{
.num = 1,
.pin = 0,
.reg = 0x418,
.bit = 0,
.mask = 0x3
}, {
.num = 1,
.pin = 1,
.reg = 0x418,
.bit = 2,
.mask = 0x3
}, {
.num = 1,
.pin = 2,
.reg = 0x418,
.bit = 4,
.mask = 0x3
}, {
.num = 1,
.pin = 3,
.reg = 0x418,
.bit = 6,
.mask = 0x3
}, {
.num = 1,
.pin = 4,
.reg = 0x418,
.bit = 8,
.mask = 0x3
}, {
.num = 1,
.pin = 5,
.reg = 0x418,
.bit = 10,
.mask = 0x3
}, {
.num = 1,
.pin = 6,
.reg = 0x418,
.bit = 12,
.mask = 0x3
}, {
.num = 1,
.pin = 7,
.reg = 0x418,
.bit = 14,
.mask = 0x3
}, {
.num = 1,
.pin = 8,
.reg = 0x41c,
.bit = 0,
.mask = 0x3
}, {
.num = 1,
.pin = 9,
.reg = 0x41c,
.bit = 2,
.mask = 0x3
},
};
static int rv1108_set_mux(struct rockchip_pin_bank *bank, int pin, int mux)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
int iomux_num = (pin / 8);
struct regmap *regmap;
int reg, ret, mask, mux_type;
u8 bit;
u32 data;
regmap = (bank->iomux[iomux_num].type & IOMUX_SOURCE_PMU)
? priv->regmap_pmu : priv->regmap_base;
/* get basic quadrupel of mux registers and the correct reg inside */
mux_type = bank->iomux[iomux_num].type;
reg = bank->iomux[iomux_num].offset;
reg += rockchip_get_mux_data(mux_type, pin, &bit, &mask);
if (bank->recalced_mask & BIT(pin))
rockchip_get_recalced_mux(bank, pin, &reg, &bit, &mask);
data = (mask << (bit + 16));
data |= (mux & mask) << bit;
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RV1108_PULL_PMU_OFFSET 0x10
#define RV1108_PULL_OFFSET 0x110
static void rv1108_calc_pull_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = priv->regmap_pmu;
*reg = RV1108_PULL_PMU_OFFSET;
} else {
*reg = RV1108_PULL_OFFSET;
*regmap = priv->regmap_base;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * ROCKCHIP_PULL_BANK_STRIDE;
}
*reg += ((pin_num / ROCKCHIP_PULL_PINS_PER_REG) * 4);
*bit = (pin_num % ROCKCHIP_PULL_PINS_PER_REG);
*bit *= ROCKCHIP_PULL_BITS_PER_PIN;
}
static int rv1108_set_pull(struct rockchip_pin_bank *bank,
int pin_num, int pull)
{
struct regmap *regmap;
int reg, ret;
u8 bit, type;
u32 data;
if (pull == PIN_CONFIG_BIAS_PULL_PIN_DEFAULT)
return -ENOTSUPP;
rv1108_calc_pull_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
type = bank->pull_type[pin_num / 8];
ret = rockchip_translate_pull_value(type, pull);
if (ret < 0) {
debug("unsupported pull setting %d\n", pull);
return ret;
}
/* enable the write to the equivalent lower bits */
data = ((1 << ROCKCHIP_PULL_BITS_PER_PIN) - 1) << (bit + 16);
data |= (ret << bit);
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RV1108_DRV_PMU_OFFSET 0x20
#define RV1108_DRV_GRF_OFFSET 0x210
static void rv1108_calc_drv_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num, struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
/* The first 24 pins of the first bank are located in PMU */
if (bank->bank_num == 0) {
*regmap = priv->regmap_pmu;
*reg = RV1108_DRV_PMU_OFFSET;
} else {
*regmap = priv->regmap_base;
*reg = RV1108_DRV_GRF_OFFSET;
/* correct the offset, as we're starting with the 2nd bank */
*reg -= 0x10;
*reg += bank->bank_num * ROCKCHIP_DRV_BANK_STRIDE;
}
*reg += ((pin_num / ROCKCHIP_DRV_PINS_PER_REG) * 4);
*bit = pin_num % ROCKCHIP_DRV_PINS_PER_REG;
*bit *= ROCKCHIP_DRV_BITS_PER_PIN;
}
static int rv1108_set_drive(struct rockchip_pin_bank *bank,
int pin_num, int strength)
{
struct regmap *regmap;
int reg, ret;
u32 data;
u8 bit;
int type = bank->drv[pin_num / 8].drv_type;
rv1108_calc_drv_reg_and_bit(bank, pin_num, &regmap, &reg, &bit);
ret = rockchip_translate_drive_value(type, strength);
if (ret < 0) {
debug("unsupported driver strength %d\n", strength);
return ret;
}
/* enable the write to the equivalent lower bits */
data = ((1 << ROCKCHIP_DRV_BITS_PER_PIN) - 1) << (bit + 16);
data |= (ret << bit);
ret = regmap_write(regmap, reg, data);
return ret;
}
#define RV1108_SCHMITT_PMU_OFFSET 0x30
#define RV1108_SCHMITT_GRF_OFFSET 0x388
#define RV1108_SCHMITT_BANK_STRIDE 8
#define RV1108_SCHMITT_PINS_PER_GRF_REG 16
#define RV1108_SCHMITT_PINS_PER_PMU_REG 8
static int rv1108_calc_schmitt_reg_and_bit(struct rockchip_pin_bank *bank,
int pin_num,
struct regmap **regmap,
int *reg, u8 *bit)
{
struct rockchip_pinctrl_priv *priv = bank->priv;
int pins_per_reg;
if (bank->bank_num == 0) {
*regmap = priv->regmap_pmu;
*reg = RV1108_SCHMITT_PMU_OFFSET;
pins_per_reg = RV1108_SCHMITT_PINS_PER_PMU_REG;
} else {
*regmap = priv->regmap_base;
*reg = RV1108_SCHMITT_GRF_OFFSET;
pins_per_reg = RV1108_SCHMITT_PINS_PER_GRF_REG;
*reg += (bank->bank_num - 1) * RV1108_SCHMITT_BANK_STRIDE;
}
*reg += ((pin_num / pins_per_reg) * 4);
*bit = pin_num % pins_per_reg;
return 0;
}
static struct rockchip_pin_bank rv1108_pin_banks[] = {
PIN_BANK_IOMUX_FLAGS(0, 32, "gpio0", IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU,
IOMUX_SOURCE_PMU),
PIN_BANK_IOMUX_FLAGS(1, 32, "gpio1", 0, 0, 0, 0),
PIN_BANK_IOMUX_FLAGS(2, 32, "gpio2", 0, 0, 0, 0),
PIN_BANK_IOMUX_FLAGS(3, 32, "gpio3", 0, 0, 0, 0),
};
static struct rockchip_pin_ctrl rv1108_pin_ctrl = {
.pin_banks = rv1108_pin_banks,
.nr_banks = ARRAY_SIZE(rv1108_pin_banks),
.grf_mux_offset = 0x10,
.pmu_mux_offset = 0x0,
.iomux_recalced = rv1108_mux_recalced_data,
.niomux_recalced = ARRAY_SIZE(rv1108_mux_recalced_data),
.set_mux = rv1108_set_mux,
.set_pull = rv1108_set_pull,
.set_drive = rv1108_set_drive,
.schmitt_calc_reg = rv1108_calc_schmitt_reg_and_bit,
};
static const struct udevice_id rv1108_pinctrl_ids[] = {
{
.compatible = "rockchip,rv1108-pinctrl",
.data = (ulong)&rv1108_pin_ctrl
},
{ }
};
U_BOOT_DRIVER(pinctrl_rv1108) = {
.name = "pinctrl_rv1108",
.id = UCLASS_PINCTRL,
.of_match = rv1108_pinctrl_ids,
.priv_auto_alloc_size = sizeof(struct rockchip_pinctrl_priv),
.ops = &rockchip_pinctrl_ops,
#if !CONFIG_IS_ENABLED(OF_PLATDATA)
.bind = dm_scan_fdt_dev,
#endif
.probe = rockchip_pinctrl_probe,
};