u-boot/arch/arm/dts/k3-j7200-common-proc-board-u-boot.dtsi
Lokesh Vutla 6239cc8c4e arm: dts: k3-j7200: Sync Linux v5.11-rc6 dts into U-Boot
Sync all J7200 related v5.11-rc6 Linux kernel dts into U-Boot.
MCU R5F nodes are not yet added in Linux kernel yet but were added
in U-Boot. In order to avoid regressions, r5f nodes are kept intact.
These will be added in kernel in future.

Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
2021-02-04 20:37:57 +05:30

161 lines
1.9 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2020 Texas Instruments Incorporated - https://www.ti.com/
*/
/ {
chosen {
stdout-path = "serial2:115200n8";
tick-timer = &timer1;
};
aliases {
ethernet0 = &cpsw_port1;
i2c0 = &wkup_i2c0;
i2c1 = &mcu_i2c0;
i2c2 = &mcu_i2c1;
i2c3 = &main_i2c0;
};
};
&cbass_main {
u-boot,dm-spl;
};
&main_navss {
u-boot,dm-spl;
};
&cbass_mcu_wakeup {
u-boot,dm-spl;
timer1: timer@40400000 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x40400000 0x0 0x80>;
ti,timer-alwon;
clock-frequency = <25000000>;
u-boot,dm-spl;
};
chipid@43000014 {
u-boot,dm-spl;
};
};
&secure_proxy_main {
u-boot,dm-spl;
};
&dmsc {
u-boot,dm-spl;
k3_sysreset: sysreset-controller {
compatible = "ti,sci-sysreset";
u-boot,dm-spl;
};
};
&k3_pds {
u-boot,dm-spl;
};
&k3_clks {
u-boot,dm-spl;
};
&k3_reset {
u-boot,dm-spl;
};
&wkup_pmx0 {
u-boot,dm-spl;
};
&main_pmx0 {
u-boot,dm-spl;
};
&main_uart0 {
u-boot,dm-spl;
};
&mcu_uart0 {
u-boot,dm-spl;
};
&main_sdhci0 {
u-boot,dm-spl;
};
&main_sdhci1 {
u-boot,dm-spl;
};
&wkup_i2c0_pins_default {
u-boot,dm-spl;
};
&wkup_i2c0 {
u-boot,dm-spl;
};
&main_i2c0 {
u-boot,dm-spl;
};
&main_i2c0_pins_default {
u-boot,dm-spl;
};
&exp2 {
u-boot,dm-spl;
};
&mcu_cpsw {
reg = <0x0 0x46000000 0x0 0x200000>,
<0x0 0x40f00200 0x0 0x8>;
reg-names = "cpsw_nuss", "mac_efuse";
cpsw-phy-sel@40f04040 {
compatible = "ti,am654-cpsw-phy-sel";
reg= <0x0 0x40f04040 0x0 0x4>;
reg-names = "gmii-sel";
};
};
&main_usbss0_pins_default {
u-boot,dm-spl;
};
&usbss0 {
u-boot,dm-spl;
ti,usb2-only;
};
&usb0 {
dr_mode = "peripheral";
u-boot,dm-spl;
};
&wkup_gpio_pins_default {
u-boot,dm-spl;
};
&mcu_fss0_hpb0_pins_default {
u-boot,dm-spl;
};
&fss {
u-boot,dm-spl;
};
&hbmc {
u-boot,dm-spl;
flash@0,0 {
u-boot,dm-spl;
};
};
&hbmc_mux {
u-boot,dm-spl;
};