mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-23 19:43:33 +00:00
6e7df1d151
At this point, the remaining places where we have a symbol that is defined as CONFIG_... are in fairly odd locations. While as much dead code has been removed as possible, some of these locations are simply less obvious at first. In other cases, this code is used, but was defined in such a way as to have been missed by earlier checks. Perform a rename of all such remaining symbols to be CFG_... rather than CONFIG_... Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
490 lines
14 KiB
C
490 lines
14 KiB
C
/* SPDX-License-Identifier: GPL-2.0 */
|
|
/*
|
|
* Copyright 2008-2016 Freescale Semiconductor, Inc.
|
|
* Copyright 2017-2018 NXP Semiconductor
|
|
*/
|
|
|
|
#ifndef FSL_DDR_MEMCTL_H
|
|
#define FSL_DDR_MEMCTL_H
|
|
|
|
/*
|
|
* Pick a basic DDR Technology.
|
|
*/
|
|
#include <ddr_spd.h>
|
|
#include <fsl_ddrc_version.h>
|
|
|
|
#define SDRAM_TYPE_DDR1 2
|
|
#define SDRAM_TYPE_DDR2 3
|
|
#define SDRAM_TYPE_LPDDR1 6
|
|
#define SDRAM_TYPE_DDR3 7
|
|
#define SDRAM_TYPE_DDR4 5
|
|
|
|
#define DDR_BL4 4 /* burst length 4 */
|
|
#define DDR_BC4 DDR_BL4 /* burst chop for ddr3 */
|
|
#define DDR_OTF 6 /* on-the-fly BC4 and BL8 */
|
|
#define DDR_BL8 8 /* burst length 8 */
|
|
|
|
#define DDR3_RTT_OFF 0
|
|
#define DDR3_RTT_60_OHM 1 /* RTT_Nom = RZQ/4 */
|
|
#define DDR3_RTT_120_OHM 2 /* RTT_Nom = RZQ/2 */
|
|
#define DDR3_RTT_40_OHM 3 /* RTT_Nom = RZQ/6 */
|
|
#define DDR3_RTT_20_OHM 4 /* RTT_Nom = RZQ/12 */
|
|
#define DDR3_RTT_30_OHM 5 /* RTT_Nom = RZQ/8 */
|
|
|
|
#define DDR4_RTT_OFF 0
|
|
#define DDR4_RTT_60_OHM 1 /* RZQ/4 */
|
|
#define DDR4_RTT_120_OHM 2 /* RZQ/2 */
|
|
#define DDR4_RTT_40_OHM 3 /* RZQ/6 */
|
|
#define DDR4_RTT_240_OHM 4 /* RZQ/1 */
|
|
#define DDR4_RTT_48_OHM 5 /* RZQ/5 */
|
|
#define DDR4_RTT_80_OHM 6 /* RZQ/3 */
|
|
#define DDR4_RTT_34_OHM 7 /* RZQ/7 */
|
|
|
|
#define DDR2_RTT_OFF 0
|
|
#define DDR2_RTT_75_OHM 1
|
|
#define DDR2_RTT_150_OHM 2
|
|
#define DDR2_RTT_50_OHM 3
|
|
|
|
#if defined(CONFIG_SYS_FSL_DDR1)
|
|
#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (1)
|
|
typedef ddr1_spd_eeprom_t generic_spd_eeprom_t;
|
|
#ifndef CFG_FSL_SDRAM_TYPE
|
|
#define CFG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR1
|
|
#endif
|
|
#elif defined(CONFIG_SYS_FSL_DDR2)
|
|
#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3)
|
|
typedef ddr2_spd_eeprom_t generic_spd_eeprom_t;
|
|
#ifndef CFG_FSL_SDRAM_TYPE
|
|
#define CFG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR2
|
|
#endif
|
|
#elif defined(CONFIG_SYS_FSL_DDR3)
|
|
typedef ddr3_spd_eeprom_t generic_spd_eeprom_t;
|
|
#ifndef CFG_FSL_SDRAM_TYPE
|
|
#define CFG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR3
|
|
#endif
|
|
#elif defined(CONFIG_SYS_FSL_DDR4)
|
|
#define FSL_DDR_MIN_TCKE_PULSE_WIDTH_DDR (3) /* FIXME */
|
|
typedef struct ddr4_spd_eeprom_s generic_spd_eeprom_t;
|
|
#ifndef CFG_FSL_SDRAM_TYPE
|
|
#define CFG_FSL_SDRAM_TYPE SDRAM_TYPE_DDR4
|
|
#endif
|
|
#endif /* #if defined(CONFIG_SYS_FSL_DDR1) */
|
|
|
|
#define FSL_DDR_ODT_NEVER 0x0
|
|
#define FSL_DDR_ODT_CS 0x1
|
|
#define FSL_DDR_ODT_ALL_OTHER_CS 0x2
|
|
#define FSL_DDR_ODT_OTHER_DIMM 0x3
|
|
#define FSL_DDR_ODT_ALL 0x4
|
|
#define FSL_DDR_ODT_SAME_DIMM 0x5
|
|
#define FSL_DDR_ODT_CS_AND_OTHER_DIMM 0x6
|
|
#define FSL_DDR_ODT_OTHER_CS_ONSAMEDIMM 0x7
|
|
|
|
/* define bank(chip select) interleaving mode */
|
|
#define FSL_DDR_CS0_CS1 0x40
|
|
#define FSL_DDR_CS2_CS3 0x20
|
|
#define FSL_DDR_CS0_CS1_AND_CS2_CS3 (FSL_DDR_CS0_CS1 | FSL_DDR_CS2_CS3)
|
|
#define FSL_DDR_CS0_CS1_CS2_CS3 (FSL_DDR_CS0_CS1_AND_CS2_CS3 | 0x04)
|
|
|
|
/* define memory controller interleaving mode */
|
|
#define FSL_DDR_CACHE_LINE_INTERLEAVING 0x0
|
|
#define FSL_DDR_PAGE_INTERLEAVING 0x1
|
|
#define FSL_DDR_BANK_INTERLEAVING 0x2
|
|
#define FSL_DDR_SUPERBANK_INTERLEAVING 0x3
|
|
#define FSL_DDR_256B_INTERLEAVING 0x8
|
|
#define FSL_DDR_3WAY_1KB_INTERLEAVING 0xA
|
|
#define FSL_DDR_3WAY_4KB_INTERLEAVING 0xC
|
|
#define FSL_DDR_3WAY_8KB_INTERLEAVING 0xD
|
|
/* placeholder for 4-way interleaving */
|
|
#define FSL_DDR_4WAY_1KB_INTERLEAVING 0x1A
|
|
#define FSL_DDR_4WAY_4KB_INTERLEAVING 0x1C
|
|
#define FSL_DDR_4WAY_8KB_INTERLEAVING 0x1D
|
|
|
|
#define SDRAM_CS_CONFIG_EN 0x80000000
|
|
|
|
/* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
|
|
*/
|
|
#define SDRAM_CFG_MEM_EN 0x80000000
|
|
#define SDRAM_CFG_SREN 0x40000000
|
|
#define SDRAM_CFG_ECC_EN 0x20000000
|
|
#define SDRAM_CFG_RD_EN 0x10000000
|
|
#define SDRAM_CFG_SDRAM_TYPE_DDR1 0x02000000
|
|
#define SDRAM_CFG_SDRAM_TYPE_DDR2 0x03000000
|
|
#define SDRAM_CFG_SDRAM_TYPE_MASK 0x07000000
|
|
#define SDRAM_CFG_SDRAM_TYPE_SHIFT 24
|
|
#define SDRAM_CFG_DYN_PWR 0x00200000
|
|
#define SDRAM_CFG_DBW_MASK 0x00180000
|
|
#define SDRAM_CFG_DBW_SHIFT 19
|
|
#define SDRAM_CFG_32_BE 0x00080000
|
|
#define SDRAM_CFG_16_BE 0x00100000
|
|
#define SDRAM_CFG_8_BE 0x00040000
|
|
#define SDRAM_CFG_NCAP 0x00020000
|
|
#define SDRAM_CFG_2T_EN 0x00008000
|
|
#define SDRAM_CFG_BI 0x00000001
|
|
|
|
#define SDRAM_CFG2_FRC_SR 0x80000000
|
|
#define SDRAM_CFG2_D_INIT 0x00000010
|
|
#define SDRAM_CFG2_AP_EN 0x00000020
|
|
#define SDRAM_CFG2_ODT_CFG_MASK 0x00600000
|
|
#define SDRAM_CFG2_ODT_NEVER 0
|
|
#define SDRAM_CFG2_ODT_ONLY_WRITE 1
|
|
#define SDRAM_CFG2_ODT_ONLY_READ 2
|
|
#define SDRAM_CFG2_ODT_ALWAYS 3
|
|
|
|
#define SDRAM_INTERVAL_BSTOPRE 0x3FFF
|
|
#define TIMING_CFG_2_CPO_MASK 0x0F800000
|
|
|
|
#if defined(CONFIG_SYS_FSL_DDR_VER) && \
|
|
(CONFIG_SYS_FSL_DDR_VER > FSL_DDR_VER_4_4)
|
|
#define RD_TO_PRE_MASK 0xf
|
|
#define RD_TO_PRE_SHIFT 13
|
|
#define WR_DATA_DELAY_MASK 0xf
|
|
#define WR_DATA_DELAY_SHIFT 9
|
|
#else
|
|
#define RD_TO_PRE_MASK 0x7
|
|
#define RD_TO_PRE_SHIFT 13
|
|
#define WR_DATA_DELAY_MASK 0x7
|
|
#define WR_DATA_DELAY_SHIFT 10
|
|
#endif
|
|
|
|
/* DDR_EOR register */
|
|
#define DDR_EOR_RD_REOD_DIS 0x07000000
|
|
#define DDR_EOR_WD_REOD_DIS 0x00100000
|
|
|
|
/* DDR_MD_CNTL */
|
|
#define MD_CNTL_MD_EN 0x80000000
|
|
#define MD_CNTL_CS_SEL_CS0 0x00000000
|
|
#define MD_CNTL_CS_SEL_CS1 0x10000000
|
|
#define MD_CNTL_CS_SEL_CS2 0x20000000
|
|
#define MD_CNTL_CS_SEL_CS3 0x30000000
|
|
#define MD_CNTL_CS_SEL_CS0_CS1 0x40000000
|
|
#define MD_CNTL_CS_SEL_CS2_CS3 0x50000000
|
|
#define MD_CNTL_MD_SEL_MR 0x00000000
|
|
#define MD_CNTL_MD_SEL_EMR 0x01000000
|
|
#define MD_CNTL_MD_SEL_EMR2 0x02000000
|
|
#define MD_CNTL_MD_SEL_EMR3 0x03000000
|
|
#define MD_CNTL_SET_REF 0x00800000
|
|
#define MD_CNTL_SET_PRE 0x00400000
|
|
#define MD_CNTL_CKE_CNTL_LOW 0x00100000
|
|
#define MD_CNTL_CKE_CNTL_HIGH 0x00200000
|
|
#define MD_CNTL_WRCW 0x00080000
|
|
#define MD_CNTL_MD_VALUE(x) (x & 0x0000FFFF)
|
|
#define MD_CNTL_CS_SEL(x) (((x) & 0x7) << 28)
|
|
#define MD_CNTL_MD_SEL(x) (((x) & 0xf) << 24)
|
|
|
|
/* DDR_CDR1 */
|
|
#define DDR_CDR1_DHC_EN 0x80000000
|
|
#define DDR_CDR1_V0PT9_EN 0x40000000
|
|
#define DDR_CDR1_ODT_SHIFT 17
|
|
#define DDR_CDR1_ODT_MASK 0x6
|
|
#define DDR_CDR2_ODT_MASK 0x1
|
|
#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
|
|
#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
|
|
#define DDR_CDR2_VREF_OVRD(x) (0x00008080 | ((((x) - 37) & 0x3F) << 8))
|
|
#define DDR_CDR2_VREF_TRAIN_EN 0x00000080
|
|
#define DDR_CDR2_VREF_RANGE_2 0x00000040
|
|
|
|
/* DDR ERR_DISABLE */
|
|
#define DDR_ERR_DISABLE_APED (1 << 8) /* Address parity error disable */
|
|
|
|
/* Mode Registers */
|
|
#define DDR_MR5_CA_PARITY_LAT_4_CLK 0x1 /* for DDR4-1600/1866/2133 */
|
|
#define DDR_MR5_CA_PARITY_LAT_5_CLK 0x2 /* for DDR4-2400 */
|
|
|
|
/* DEBUG_26 register */
|
|
#define DDR_CAS_TO_PRE_SUB_MASK 0x0000f000 /* CAS to preamble subtract value */
|
|
#define DDR_CAS_TO_PRE_SUB_SHIFT 12
|
|
|
|
/* DEBUG_29 register */
|
|
#define DDR_TX_BD_DIS (1 << 10) /* Transmit Bit Deskew Disable */
|
|
|
|
|
|
#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
|
|
(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
|
|
#ifdef CONFIG_SYS_FSL_DDR3L
|
|
#define DDR_CDR_ODT_OFF 0x0
|
|
#define DDR_CDR_ODT_120ohm 0x1
|
|
#define DDR_CDR_ODT_200ohm 0x2
|
|
#define DDR_CDR_ODT_75ohm 0x3
|
|
#define DDR_CDR_ODT_60ohm 0x5
|
|
#define DDR_CDR_ODT_46ohm 0x7
|
|
#elif defined(CONFIG_SYS_FSL_DDR4)
|
|
#define DDR_CDR_ODT_OFF 0x0
|
|
#define DDR_CDR_ODT_100ohm 0x1
|
|
#define DDR_CDR_ODT_120OHM 0x2
|
|
#define DDR_CDR_ODT_80ohm 0x3
|
|
#define DDR_CDR_ODT_60ohm 0x4
|
|
#define DDR_CDR_ODT_40ohm 0x5
|
|
#define DDR_CDR_ODT_50ohm 0x6
|
|
#define DDR_CDR_ODT_30ohm 0x7
|
|
#else
|
|
#define DDR_CDR_ODT_OFF 0x0
|
|
#define DDR_CDR_ODT_120ohm 0x1
|
|
#define DDR_CDR_ODT_180ohm 0x2
|
|
#define DDR_CDR_ODT_75ohm 0x3
|
|
#define DDR_CDR_ODT_110ohm 0x4
|
|
#define DDR_CDR_ODT_60hm 0x5
|
|
#define DDR_CDR_ODT_70ohm 0x6
|
|
#define DDR_CDR_ODT_47ohm 0x7
|
|
#endif /* DDR3L */
|
|
#else
|
|
#define DDR_CDR_ODT_75ohm 0x0
|
|
#define DDR_CDR_ODT_55ohm 0x1
|
|
#define DDR_CDR_ODT_60ohm 0x2
|
|
#define DDR_CDR_ODT_50ohm 0x3
|
|
#define DDR_CDR_ODT_150ohm 0x4
|
|
#define DDR_CDR_ODT_43ohm 0x5
|
|
#define DDR_CDR_ODT_120ohm 0x6
|
|
#endif
|
|
|
|
#define DDR_INIT_ADDR_EXT_UIA (1 << 31)
|
|
|
|
/* Record of register values computed */
|
|
typedef struct fsl_ddr_cfg_regs_s {
|
|
struct {
|
|
unsigned int bnds;
|
|
unsigned int config;
|
|
unsigned int config_2;
|
|
} cs[CONFIG_CHIP_SELECTS_PER_CTRL];
|
|
unsigned int timing_cfg_3;
|
|
unsigned int timing_cfg_0;
|
|
unsigned int timing_cfg_1;
|
|
unsigned int timing_cfg_2;
|
|
unsigned int ddr_sdram_cfg;
|
|
unsigned int ddr_sdram_cfg_2;
|
|
unsigned int ddr_sdram_cfg_3;
|
|
unsigned int ddr_sdram_mode;
|
|
unsigned int ddr_sdram_mode_2;
|
|
unsigned int ddr_sdram_mode_3;
|
|
unsigned int ddr_sdram_mode_4;
|
|
unsigned int ddr_sdram_mode_5;
|
|
unsigned int ddr_sdram_mode_6;
|
|
unsigned int ddr_sdram_mode_7;
|
|
unsigned int ddr_sdram_mode_8;
|
|
unsigned int ddr_sdram_mode_9;
|
|
unsigned int ddr_sdram_mode_10;
|
|
unsigned int ddr_sdram_mode_11;
|
|
unsigned int ddr_sdram_mode_12;
|
|
unsigned int ddr_sdram_mode_13;
|
|
unsigned int ddr_sdram_mode_14;
|
|
unsigned int ddr_sdram_mode_15;
|
|
unsigned int ddr_sdram_mode_16;
|
|
unsigned int ddr_sdram_md_cntl;
|
|
unsigned int ddr_sdram_interval;
|
|
unsigned int ddr_data_init;
|
|
unsigned int ddr_sdram_clk_cntl;
|
|
unsigned int ddr_init_addr;
|
|
unsigned int ddr_init_ext_addr;
|
|
unsigned int timing_cfg_4;
|
|
unsigned int timing_cfg_5;
|
|
unsigned int timing_cfg_6;
|
|
unsigned int timing_cfg_7;
|
|
unsigned int timing_cfg_8;
|
|
unsigned int timing_cfg_9;
|
|
unsigned int ddr_zq_cntl;
|
|
unsigned int ddr_wrlvl_cntl;
|
|
unsigned int ddr_wrlvl_cntl_2;
|
|
unsigned int ddr_wrlvl_cntl_3;
|
|
unsigned int ddr_sr_cntr;
|
|
unsigned int ddr_sdram_rcw_1;
|
|
unsigned int ddr_sdram_rcw_2;
|
|
unsigned int ddr_sdram_rcw_3;
|
|
unsigned int ddr_sdram_rcw_4;
|
|
unsigned int ddr_sdram_rcw_5;
|
|
unsigned int ddr_sdram_rcw_6;
|
|
unsigned int dq_map_0;
|
|
unsigned int dq_map_1;
|
|
unsigned int dq_map_2;
|
|
unsigned int dq_map_3;
|
|
unsigned int ddr_eor;
|
|
unsigned int ddr_cdr1;
|
|
unsigned int ddr_cdr2;
|
|
unsigned int err_disable;
|
|
unsigned int err_int_en;
|
|
unsigned int debug[64];
|
|
} fsl_ddr_cfg_regs_t;
|
|
|
|
typedef struct memctl_options_partial_s {
|
|
unsigned int all_dimms_ecc_capable;
|
|
unsigned int all_dimms_tckmax_ps;
|
|
unsigned int all_dimms_burst_lengths_bitmask;
|
|
unsigned int all_dimms_registered;
|
|
unsigned int all_dimms_unbuffered;
|
|
/* unsigned int lowest_common_spd_caslat; */
|
|
unsigned int all_dimms_minimum_trcd_ps;
|
|
} memctl_options_partial_t;
|
|
|
|
#define DDR_DATA_BUS_WIDTH_64 0
|
|
#define DDR_DATA_BUS_WIDTH_32 1
|
|
#define DDR_DATA_BUS_WIDTH_16 2
|
|
#define DDR_CSWL_CS0 0x04000001
|
|
/*
|
|
* Generalized parameters for memory controller configuration,
|
|
* might be a little specific to the FSL memory controller
|
|
*/
|
|
typedef struct memctl_options_s {
|
|
/*
|
|
* Memory organization parameters
|
|
*
|
|
* if DIMM is present in the system
|
|
* where DIMMs are with respect to chip select
|
|
* where chip selects are with respect to memory boundaries
|
|
*/
|
|
unsigned int registered_dimm_en; /* use registered DIMM support */
|
|
|
|
/* Options local to a Chip Select */
|
|
struct cs_local_opts_s {
|
|
unsigned int auto_precharge;
|
|
unsigned int odt_rd_cfg;
|
|
unsigned int odt_wr_cfg;
|
|
unsigned int odt_rtt_norm;
|
|
unsigned int odt_rtt_wr;
|
|
} cs_local_opts[CONFIG_CHIP_SELECTS_PER_CTRL];
|
|
|
|
/* Special configurations for chip select */
|
|
unsigned int memctl_interleaving;
|
|
unsigned int memctl_interleaving_mode;
|
|
unsigned int ba_intlv_ctl;
|
|
unsigned int addr_hash;
|
|
|
|
/* Operational mode parameters */
|
|
unsigned int ecc_mode; /* Use ECC? */
|
|
/* Initialize ECC using memory controller? */
|
|
unsigned int ecc_init_using_memctl;
|
|
unsigned int dqs_config; /* Use DQS? maybe only with DDR2? */
|
|
/* SREN - self-refresh during sleep */
|
|
unsigned int self_refresh_in_sleep;
|
|
/* SR_IE - Self-refresh interrupt enable */
|
|
unsigned int self_refresh_interrupt_en;
|
|
unsigned int dynamic_power; /* DYN_PWR */
|
|
/* memory data width to use (16-bit, 32-bit, 64-bit) */
|
|
unsigned int data_bus_width;
|
|
unsigned int burst_length; /* BL4, OTF and BL8 */
|
|
/* On-The-Fly Burst Chop enable */
|
|
unsigned int otf_burst_chop_en;
|
|
/* mirrior DIMMs for DDR3 */
|
|
unsigned int mirrored_dimm;
|
|
unsigned int quad_rank_present;
|
|
unsigned int ap_en; /* address parity enable for RDIMM/DDR4-UDIMM */
|
|
unsigned int x4_en; /* enable x4 devices */
|
|
unsigned int package_3ds;
|
|
|
|
/* Global Timing Parameters */
|
|
unsigned int cas_latency_override;
|
|
unsigned int cas_latency_override_value;
|
|
unsigned int use_derated_caslat;
|
|
unsigned int additive_latency_override;
|
|
unsigned int additive_latency_override_value;
|
|
|
|
unsigned int clk_adjust; /* */
|
|
unsigned int cpo_override; /* override timing_cfg_2[CPO]*/
|
|
unsigned int cpo_sample; /* optimize debug_29[24:31] */
|
|
unsigned int write_data_delay; /* DQS adjust */
|
|
|
|
unsigned int cswl_override;
|
|
unsigned int wrlvl_override;
|
|
unsigned int wrlvl_sample; /* Write leveling */
|
|
unsigned int wrlvl_start;
|
|
unsigned int wrlvl_ctl_2;
|
|
unsigned int wrlvl_ctl_3;
|
|
|
|
unsigned int half_strength_driver_enable;
|
|
unsigned int twot_en;
|
|
unsigned int threet_en;
|
|
unsigned int bstopre;
|
|
unsigned int tfaw_window_four_activates_ps; /* tFAW -- FOUR_ACT */
|
|
|
|
/* Rtt impedance */
|
|
unsigned int rtt_override; /* rtt_override enable */
|
|
unsigned int rtt_override_value; /* that is Rtt_Nom for DDR3 */
|
|
unsigned int rtt_wr_override_value; /* this is Rtt_WR for DDR3 */
|
|
|
|
/* Automatic self refresh */
|
|
unsigned int auto_self_refresh_en;
|
|
unsigned int sr_it;
|
|
/* ZQ calibration */
|
|
unsigned int zq_en;
|
|
/* Write leveling */
|
|
unsigned int wrlvl_en;
|
|
/* RCW override for RDIMM */
|
|
unsigned int rcw_override;
|
|
unsigned int rcw_1;
|
|
unsigned int rcw_2;
|
|
unsigned int rcw_3;
|
|
/* control register 1 */
|
|
unsigned int ddr_cdr1;
|
|
unsigned int ddr_cdr2;
|
|
|
|
unsigned int trwt_override;
|
|
unsigned int trwt; /* read-to-write turnaround */
|
|
} memctl_options_t;
|
|
|
|
phys_size_t fsl_ddr_sdram(void);
|
|
phys_size_t fsl_ddr_sdram_size(void);
|
|
phys_size_t fsl_other_ddr_sdram(unsigned long long base,
|
|
unsigned int first_ctrl,
|
|
unsigned int num_ctrls,
|
|
unsigned int dimm_slots_per_ctrl,
|
|
int (*board_need_reset)(void),
|
|
void (*board_reset)(void),
|
|
void (*board_de_reset)(void));
|
|
extern int fsl_use_spd(void);
|
|
void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
|
|
unsigned int ctrl_num, int step);
|
|
u32 fsl_ddr_get_intl3r(void);
|
|
void print_ddr_info(unsigned int start_ctrl);
|
|
|
|
static void __board_assert_mem_reset(void)
|
|
{
|
|
}
|
|
|
|
static void __board_deassert_mem_reset(void)
|
|
{
|
|
}
|
|
|
|
void board_assert_mem_reset(void)
|
|
__attribute__((weak, alias("__board_assert_mem_reset")));
|
|
|
|
void board_deassert_mem_reset(void)
|
|
__attribute__((weak, alias("__board_deassert_mem_reset")));
|
|
|
|
static int __board_need_mem_reset(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int board_need_mem_reset(void)
|
|
__attribute__((weak, alias("__board_need_mem_reset")));
|
|
|
|
#if defined(CONFIG_DEEP_SLEEP)
|
|
void board_mem_sleep_setup(void);
|
|
bool is_warm_boot(void);
|
|
int fsl_dp_resume(void);
|
|
#endif
|
|
|
|
/*
|
|
* The 85xx boards have a common prototype for fixed_sdram so put the
|
|
* declaration here.
|
|
*/
|
|
#ifdef CONFIG_MPC85xx
|
|
extern phys_size_t fixed_sdram(void);
|
|
#endif
|
|
|
|
#if defined(CONFIG_DDR_ECC)
|
|
extern void ddr_enable_ecc(unsigned int dram_size);
|
|
#endif
|
|
|
|
|
|
typedef struct fixed_ddr_parm{
|
|
int min_freq;
|
|
int max_freq;
|
|
fsl_ddr_cfg_regs_t *ddr_settings;
|
|
} fixed_ddr_parm_t;
|
|
|
|
/**
|
|
* fsl_initdram() - Set up the SDRAM
|
|
*
|
|
* Return: 0 if OK, -ve on error
|
|
*/
|
|
int fsl_initdram(void);
|
|
|
|
#endif
|