mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 06:53:09 +00:00
7d08077334
This converts the following to Kconfig: CONFIG_SYS_MMC_ENV_DEV CONFIG_SYS_MMC_ENV_PART Note that with this conversion we now have consistent behavior with respect to ensuring that we have always selected the correct MMC device and hardware partition. Signed-off-by: Tom Rini <trini@konsulko.com>
189 lines
5.9 KiB
C
189 lines
5.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2014, Barco (www.barco.com)
|
|
*/
|
|
|
|
#ifndef __PLATINUM_CONFIG_H__
|
|
#define __PLATINUM_CONFIG_H__
|
|
|
|
/* SPL */
|
|
|
|
/* Location in NAND to read U-Boot from */
|
|
#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
|
|
|
|
#include "imx6_spl.h" /* common IMX6 SPL configuration */
|
|
#include "mx6_common.h"
|
|
|
|
/*
|
|
* Hardware configuration
|
|
*/
|
|
|
|
/* UART config */
|
|
#define CONFIG_MXC_UART_BASE UART1_BASE
|
|
|
|
/* I2C config */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* MMC config */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 1
|
|
|
|
/* Ethernet config */
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
|
|
/* USB config */
|
|
#define CONFIG_MXC_USB_PORT 1
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_MXC_USB_FLAGS 0
|
|
|
|
/* Memory config */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
#ifndef PHYS_SDRAM_SIZE
|
|
#define PHYS_SDRAM_SIZE (1024 << 20)
|
|
#endif
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
|
|
GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
|
|
|
|
#ifdef CONFIG_CMD_NAND
|
|
|
|
/* NAND config */
|
|
#ifndef CONFIG_SYS_NAND_MAX_CHIPS
|
|
#define CONFIG_SYS_NAND_MAX_CHIPS 2
|
|
#endif
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_BASE 0x40000000
|
|
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
|
|
#define CONFIG_SYS_NAND_ONFI_DETECTION
|
|
|
|
/* DMA config, needed for GPMI/MXS NAND support */
|
|
|
|
/* Environment in NAND */
|
|
|
|
#else /* CONFIG_CMD_NAND */
|
|
|
|
/* Environment in MMC */
|
|
|
|
#endif /* CONFIG_CMD_NAND */
|
|
|
|
/*
|
|
* U-Boot configuration
|
|
*/
|
|
|
|
/* Board startup config */
|
|
|
|
#define CONFIG_BOOTCOMMAND "run bootubi_scr"
|
|
|
|
/* Miscellaneous configurable options */
|
|
|
|
/* MTD/UBI/UBIFS config */
|
|
|
|
/*
|
|
* Environment configuration
|
|
*/
|
|
|
|
#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
|
|
#define CONFIG_COMMON_ENV_UBI \
|
|
"setubipartition=env set ubipartition ubi\0" \
|
|
"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
|
|
#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
|
|
#define CONFIG_COMMON_ENV_UBI \
|
|
"setubipartition=env set ubipartition ubi$boot_vol\0" \
|
|
"setubirfs=env set ubirfs ubi0:rootfs\0"
|
|
#endif
|
|
|
|
#define CONFIG_COMMON_ENV_MISC \
|
|
"user=user\0" \
|
|
"project="CONFIG_PLATINUM_PROJECT"\0" \
|
|
"uimage=uImage\0" \
|
|
"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
|
|
"serverip=serverip\0" \
|
|
"memaddrlinux=0x10800000\0" \
|
|
"memaddrsrc=0x11000000\0" \
|
|
"memaddrdtb=0x12000000\0" \
|
|
"console=ttymxc0\0" \
|
|
"baudrate=115200\0" \
|
|
"boot_scr=boot.uboot\0" \
|
|
"boot_vol=0\0" \
|
|
"mtdids="CONFIG_MTDIDS_DEFAULT"\0" \
|
|
"mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \
|
|
"mmcfs=ext2\0" \
|
|
"mmcrootpart=1\0" \
|
|
\
|
|
"setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
|
|
"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
|
|
"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
|
|
"setubifilelinux=env set ubifilelinux boot/$uimage\0" \
|
|
"setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
|
|
"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
|
|
"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
|
|
"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
|
|
\
|
|
"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
|
|
"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
|
|
"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
|
|
"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
|
|
"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
|
|
"$mmcfilelinux\0" \
|
|
"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
|
|
"$mmcfiledtb\0" \
|
|
\
|
|
"ubipart=ubi part $ubipartition\0" \
|
|
"ubimount=ubifsmount $ubirfs\0" \
|
|
\
|
|
"setbootargscommon=env set bootargs $bootargs " \
|
|
"console=$console,$baudrate enable_wait_mode=off\0" \
|
|
"setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
|
|
"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
|
|
"setbootargsubirfs=env set bootargs $bootargs " \
|
|
"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
|
|
"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
|
|
"nfsroot=$serverip:$nfspath,v3,tcp\0" \
|
|
"setbootargsmmcrfs=env set bootargs $bootargs " \
|
|
"root=$mmcrootdev rootwait rw\0" \
|
|
\
|
|
"bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
|
|
"setbootargscommon setbootargsmtd setbootargsdhcp " \
|
|
"setbootargsnfsrfs;" \
|
|
"run loadtftpkernel loadtftpdtb;" \
|
|
"bootm $memaddrlinux - $memaddrdtb\0" \
|
|
"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
|
|
"run setubipartition setubirfs;" \
|
|
"run setbootargscommon setbootargsmtd " \
|
|
"setbootargsubirfs;" \
|
|
"run loadtftpkernel loadtftpdtb;" \
|
|
"bootm $memaddrlinux - $memaddrdtb\0" \
|
|
"bootubi=run setubipartition setubirfs setubifilelinux " \
|
|
"setubipfiledtb;" \
|
|
"run setbootargscommon setbootargsmtd " \
|
|
"setbootargsubirfs;" \
|
|
"run ubipart ubimount loadubikernel loadubidtb;" \
|
|
"bootm $memaddrlinux - $memaddrdtb\0" \
|
|
"bootubi_scr=run setubipartition setubirfs;" \
|
|
"run ubipart ubimount;" \
|
|
"if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
|
|
"then source ${memaddrsrc}; else run bootubi; fi\0" \
|
|
"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
|
|
"setbootargscommon setbootargsmmcrfs;" \
|
|
"run loadmmckernel loadmmcdtb;" \
|
|
"bootm $memaddrlinux - $memaddrdtb\0" \
|
|
\
|
|
"bootcmd="CONFIG_BOOTCOMMAND"\0"
|
|
|
|
#define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
|
|
CONFIG_COMMON_ENV_UBI
|
|
#endif /* __PLATINUM_CONFIG_H__ */
|