u-boot/arch/arm/mach-imx/mx5/soc.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

115 lines
2.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
* (C) Copyright 2009 Freescale Semiconductor, Inc.
*/
#include <common.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/sys_proto.h>
#include <linux/errno.h>
#include <asm/io.h>
#include <asm/mach-imx/boot_mode.h>
#if !(defined(CONFIG_MX51) || defined(CONFIG_MX53))
#error "CPU_TYPE not defined"
#endif
u32 get_cpu_rev(void)
{
#ifdef CONFIG_MX51
int system_rev = 0x51000;
#else
int system_rev = 0x53000;
#endif
int reg = __raw_readl(ROM_SI_REV);
#if defined(CONFIG_MX51)
switch (reg) {
case 0x02:
system_rev |= CHIP_REV_1_1;
break;
case 0x10:
if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0)
system_rev |= CHIP_REV_2_5;
else
system_rev |= CHIP_REV_2_0;
break;
case 0x20:
system_rev |= CHIP_REV_3_0;
break;
default:
system_rev |= CHIP_REV_1_0;
break;
}
#else
if (reg < 0x20)
system_rev |= CHIP_REV_1_0;
else
system_rev |= reg;
#endif
return system_rev;
}
#ifdef CONFIG_REVISION_TAG
u32 __weak get_board_rev(void)
{
return get_cpu_rev();
}
#endif
#ifndef CONFIG_SYS_DCACHE_OFF
void enable_caches(void)
{
/* Enable D-cache. I-cache is already enabled in start.S */
dcache_enable();
}
#endif
#if defined(CONFIG_FEC_MXC)
void imx_get_mac_from_fuse(int dev_id, unsigned char *mac)
{
int i;
struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
struct fuse_bank *bank = &iim->bank[1];
struct fuse_bank1_regs *fuse =
(struct fuse_bank1_regs *)bank->fuse_regs;
for (i = 0; i < 6; i++)
mac[i] = readl(&fuse->mac_addr[i]) & 0xff;
}
#endif
#ifdef CONFIG_MX53
void boot_mode_apply(unsigned cfg_val)
{
writel(cfg_val, &((struct srtc_regs *)SRTC_BASE_ADDR)->lpgr);
}
/*
* cfg_val will be used for
* Boot_cfg3[7:0]:Boot_cfg2[7:0]:Boot_cfg1[7:0]
*
* If bit 28 of LPGR is set upon watchdog reset,
* bits[25:0] of LPGR will move to SBMR.
*/
const struct boot_mode soc_boot_modes[] = {
{"normal", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x00)},
/* usb or serial download */
{"usb", MAKE_CFGVAL(0x00, 0x00, 0x00, 0x13)},
{"sata", MAKE_CFGVAL(0x28, 0x00, 0x00, 0x12)},
{"escpi1:0", MAKE_CFGVAL(0x38, 0x20, 0x00, 0x12)},
{"escpi1:1", MAKE_CFGVAL(0x38, 0x20, 0x04, 0x12)},
{"escpi1:2", MAKE_CFGVAL(0x38, 0x20, 0x08, 0x12)},
{"escpi1:3", MAKE_CFGVAL(0x38, 0x20, 0x0c, 0x12)},
/* 4 bit bus width */
{"esdhc1", MAKE_CFGVAL(0x40, 0x20, 0x00, 0x12)},
{"esdhc2", MAKE_CFGVAL(0x40, 0x20, 0x08, 0x12)},
{"esdhc3", MAKE_CFGVAL(0x40, 0x20, 0x10, 0x12)},
{"esdhc4", MAKE_CFGVAL(0x40, 0x20, 0x18, 0x12)},
{NULL, 0},
};
#endif