u-boot/scripts/Makefile.spl
Joel Stanley e391b1e64b Makefile: Fix linking with modern binutils
Since Binutils 1a9ccd70f9a7[1] u-boot will not link targets that set
CONFIG_SYS_TEXT_BASE=0 with the following error:

  LD      u-boot
arm-linux-gnueabi-ld.bfd: u-boot: Not enough room for program headers, try
 linking with -N
arm-linux-gnueabi-ld.bfd: final link failed: Bad value

The issue can be reproduced with the bad binutils and the rock2_defconfig
target.

This issue was also encountered by the powerpc kernel[2], with the fix
being to pass --no-dynamic-linker for linkers newer than 2.26 when this
flag was introduced. The option tells ld that the PIE or shared lib does
not need loaded program headers.

Ubuntu Zesty's Binutils 2.27.51.20161202 hits this error.

[1] https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=commit;h=1a9ccd70f9a7
[2] https://git.kernel.org/cgit/linux/kernel/git/powerpc/linux.git/commit/?h=next&id=ff45000fcb56b5b0f1a14a865d3541746d838a0a

Signed-off-by: Joel Stanley <joel@jms.id.au>
[AF: Apply to LDFLAGS_$(SPL_BIN) as well, suggested by Tom Rini]
Signed-off-by: Andreas Färber <afaerber@suse.de>
2017-04-10 08:06:48 -04:00

364 lines
11 KiB
Makefile

#
# (C) Copyright 2000-2011
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# (C) Copyright 2011
# Daniel Schwierzeck, daniel.schwierzeck@googlemail.com.
#
# (C) Copyright 2011
# Texas Instruments Incorporated - http://www.ti.com/
# Aneesh V <aneesh@ti.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
# Based on top-level Makefile.
#
src := $(obj)
# Create output directory if not already present
_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
include $(srctree)/scripts/Kbuild.include
-include include/config/auto.conf
-include $(obj)/include/autoconf.mk
KBUILD_CPPFLAGS += -DCONFIG_SPL_BUILD
ifeq ($(CONFIG_TPL_BUILD),y)
KBUILD_CPPFLAGS += -DCONFIG_TPL_BUILD
endif
ifeq ($(CONFIG_TPL_BUILD),y)
SPL_BIN := u-boot-tpl
else
SPL_BIN := u-boot-spl
endif
ifdef CONFIG_SPL_BUILD
SPL_ := SPL_
ifeq ($(CONFIG_TPL_BUILD),y)
SPL_TPL_ := TPL_
else
SPL_TPL_ := SPL_
endif
else
SPL_ :=
SPL_TPL_ :=
endif
include $(srctree)/config.mk
include $(srctree)/arch/$(ARCH)/Makefile
# Enable garbage collection of un-used sections for SPL
KBUILD_CFLAGS += -ffunction-sections -fdata-sections
LDFLAGS_FINAL += --gc-sections
# FIX ME
cpp_flags := $(KBUILD_CPPFLAGS) $(PLATFORM_CPPFLAGS) $(UBOOTINCLUDE) \
$(NOSTDINC_FLAGS)
c_flags := $(KBUILD_CFLAGS) $(cpp_flags)
HAVE_VENDOR_COMMON_LIB = $(if $(wildcard $(srctree)/board/$(VENDOR)/common/Makefile),y,n)
libs-y += $(if $(BOARDDIR),board/$(BOARDDIR)/)
libs-$(HAVE_VENDOR_COMMON_LIB) += board/$(VENDOR)/common/
libs-$(CONFIG_SPL_FRAMEWORK) += common/spl/
libs-y += common/init/
# Special handling for a few options which support SPL/TPL
ifeq ($(CONFIG_TPL_BUILD),y)
libs-$(CONFIG_TPL_LIBCOMMON_SUPPORT) += common/ cmd/
libs-$(CONFIG_TPL_LIBGENERIC_SUPPORT) += lib/
else
libs-$(CONFIG_SPL_LIBCOMMON_SUPPORT) += common/ cmd/
libs-$(CONFIG_SPL_LIBGENERIC_SUPPORT) += lib/
endif
libs-$(CONFIG_SPL_LIBDISK_SUPPORT) += disk/
libs-y += drivers/
libs-$(CONFIG_SPL_USB_GADGET_SUPPORT) += drivers/usb/dwc3/
libs-y += dts/
libs-y += fs/
libs-$(CONFIG_SPL_POST_MEM_SUPPORT) += post/drivers/
libs-$(CONFIG_SPL_NET_SUPPORT) += net/
head-y := $(addprefix $(obj)/,$(head-y))
libs-y := $(addprefix $(obj)/,$(libs-y))
u-boot-spl-dirs := $(patsubst %/,%,$(filter %/, $(libs-y)))
libs-y := $(patsubst %/, %/built-in.o, $(libs-y))
# Add GCC lib
ifeq ($(CONFIG_USE_PRIVATE_LIBGCC),y)
PLATFORM_LIBGCC = arch/$(ARCH)/lib/lib.a
PLATFORM_LIBS := $(filter-out %/lib.a, $(filter-out -lgcc, $(PLATFORM_LIBS))) $(PLATFORM_LIBGCC)
endif
u-boot-spl-init := $(head-y)
u-boot-spl-main := $(libs-y)
ifdef CONFIG_SPL_OF_PLATDATA
u-boot-spl-platdata := $(obj)/dts/dt-platdata.o
endif
# Linker Script
ifdef CONFIG_SPL_LDSCRIPT
# need to strip off double quotes
LDSCRIPT := $(addprefix $(srctree)/,$(CONFIG_SPL_LDSCRIPT:"%"=%))
endif
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(srctree)/board/$(BOARDDIR)/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(srctree)/$(CPUDIR)/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
LDSCRIPT := $(srctree)/arch/$(ARCH)/cpu/u-boot-spl.lds
endif
ifeq ($(wildcard $(LDSCRIPT)),)
$(error could not find linker script)
endif
# Special flags for CPP when processing the linker script.
# Pass the version down so we can handle backwards compatibility
# on the fly.
LDPPFLAGS += \
-include $(srctree)/include/u-boot/u-boot.lds.h \
-include $(objtree)/include/config.h \
-DCPUDIR=$(CPUDIR) \
$(shell $(LD) --version | \
sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
MKIMAGEOUTPUT ?= /dev/null
quiet_cmd_mkimage = MKIMAGE $@
cmd_mkimage = $(objtree)/tools/mkimage $(MKIMAGEFLAGS_$(@F)) -d $< $@ \
$(if $(KBUILD_VERBOSE:1=), >$(MKIMAGEOUTPUT))
MKIMAGEFLAGS_MLO = -T omapimage -a $(CONFIG_SPL_TEXT_BASE)
MKIMAGEFLAGS_MLO.byteswap = -T omapimage -n byteswap -a $(CONFIG_SPL_TEXT_BASE)
MLO MLO.byteswap: $(obj)/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
ifeq ($(CONFIG_SYS_SOC),"at91")
MKIMAGEFLAGS_boot.bin = -T atmelimage
ifeq ($(CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER),y)
MKIMAGEFLAGS_boot.bin += -n $(shell $(obj)/../tools/atmel_pmecc_params)
boot.bin: $(obj)/../tools/atmel_pmecc_params
endif
boot.bin: $(obj)/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
else
ifdef CONFIG_ARCH_ZYNQ
MKIMAGEFLAGS_boot.bin = -T zynqimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
endif
ifdef CONFIG_ARCH_ZYNQMP
MKIMAGEFLAGS_boot.bin = -T zynqmpimage -R $(srctree)/$(CONFIG_BOOT_INIT_FILE)
endif
spl/boot.bin: $(obj)/u-boot-spl.bin FORCE
$(call if_changed,mkimage)
endif
ALL-y += $(obj)/$(SPL_BIN).bin
ifdef CONFIG_SAMSUNG
ALL-y += $(obj)/$(BOARD)-spl.bin
endif
ifdef CONFIG_ARCH_SOCFPGA
ALL-y += $(obj)/$(SPL_BIN).sfp
endif
ifdef CONFIG_ARCH_SUNXI
ALL-y += $(obj)/sunxi-spl.bin
ifdef CONFIG_NAND_SUNXI
ALL-y += $(obj)/sunxi-spl-with-ecc.bin
endif
endif
ifeq ($(CONFIG_SYS_SOC),"at91")
ALL-y += boot.bin
endif
ALL-$(CONFIG_SPL_X86_16BIT_INIT) += $(obj)/u-boot-x86-16bit-spl.bin
ALL-$(CONFIG_ARCH_ZYNQ) += $(obj)/boot.bin
ALL-$(CONFIG_ARCH_ZYNQMP) += $(obj)/boot.bin
all: $(ALL-y)
quiet_cmd_cat = CAT $@
cmd_cat = cat $(filter-out $(PHONY), $^) > $@
quiet_cmd_copy = COPY $@
cmd_copy = cp $< $@
ifeq ($(CONFIG_SPL_OF_CONTROL)$(CONFIG_OF_SEPARATE)$(CONFIG_SPL_OF_PLATDATA),yy)
$(obj)/$(SPL_BIN)-dtb.bin: $(obj)/$(SPL_BIN)-nodtb.bin \
$(if $(CONFIG_SPL_SEPARATE_BSS),,$(obj)/$(SPL_BIN)-pad.bin) \
$(obj)/$(SPL_BIN).dtb FORCE
$(call if_changed,cat)
$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-dtb.bin FORCE
$(call if_changed,copy)
else
$(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN)-nodtb.bin FORCE
$(call if_changed,copy)
endif
# Create a file that pads from the end of u-boot-spl-nodtb.bin to bss_end
$(obj)/$(SPL_BIN)-pad.bin: $(obj)/$(SPL_BIN)
@bss_size_str=$(shell $(NM) $< | awk 'BEGIN {size = 0} /__bss_size/ {size = $$1} END {print "ibase=16; " toupper(size)}' | bc); \
dd if=/dev/zero of=$@ bs=1 count=$${bss_size_str} 2>/dev/null;
# Pass the original device tree file through fdtgrep twice. The first pass
# removes any unwanted nodes (i.e. those which don't have the
# 'u-boot,dm-pre-reloc' property and thus are not needed by SPL. The second
# pass removes various unused properties from the remaining nodes.
# The output is typically a much smaller device tree file.
ifeq ($(CONFIG_TPL_BUILD),y)
fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-tpl
else
fdtgrep_props := -b u-boot,dm-pre-reloc -b u-boot,dm-spl
endif
quiet_cmd_fdtgrep = FDTGREP $@
cmd_fdtgrep = $(objtree)/tools/fdtgrep $(fdtgrep_props) -RT $< \
-n /chosen -O dtb | \
$(objtree)/tools/fdtgrep -r -O dtb - -o $@ \
$(addprefix -P ,$(subst $\",,$(CONFIG_OF_SPL_REMOVE_PROPS)))
$(obj)/$(SPL_BIN).dtb: dts/dt.dtb $(objtree)/tools/fdtgrep FORCE
$(call if_changed,fdtgrep)
pythonpath = PYTHONPATH=tools
quiet_cmd_dtocc = DTOC C $@
cmd_dtocc = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ platdata
quiet_cmd_dtoch = DTOC H $@
cmd_dtoch = $(pythonpath) $(srctree)/tools/dtoc/dtoc -d $(obj)/$(SPL_BIN).dtb -o $@ struct
quiet_cmd_plat = PLAT $@
cmd_plat = $(CC) $(c_flags) -c $< -o $@
$(obj)/dts/dt-platdata.o: $(obj)/dts/dt-platdata.c include/generated/dt-structs.h
$(call if_changed,plat)
PHONY += dts_dir
dts_dir:
$(shell [ -d $(obj)/dts ] || mkdir -p $(obj)/dts)
include/generated/dt-structs.h: $(obj)/$(SPL_BIN).dtb dts_dir dtoc
$(call if_changed,dtoch)
$(obj)/dts/dt-platdata.c: $(obj)/$(SPL_BIN).dtb dts_dir dtoc
$(call if_changed,dtocc)
dtoc: #$(objtree)/tools/_libfdt.so
ifdef CONFIG_SAMSUNG
ifdef CONFIG_VAR_SIZE_SPL
VAR_SIZE_PARAM = --vs
else
VAR_SIZE_PARAM =
endif
$(obj)/$(BOARD)-spl.bin: $(obj)/u-boot-spl.bin
$(if $(wildcard $(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl),\
$(objtree)/spl/board/samsung/$(BOARD)/tools/mk$(BOARD)spl,\
$(objtree)/tools/mkexynosspl) $(VAR_SIZE_PARAM) $< $@
endif
quiet_cmd_objcopy = OBJCOPY $@
cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS) $(OBJCOPYFLAGS_$(@F)) $< $@
OBJCOPYFLAGS_$(SPL_BIN)-nodtb.bin = $(SPL_OBJCFLAGS) -O binary \
$(if $(CONFIG_SPL_X86_16BIT_INIT),-R .start16 -R .resetvec)
$(obj)/$(SPL_BIN)-nodtb.bin: $(obj)/$(SPL_BIN) FORCE
$(call if_changed,objcopy)
OBJCOPYFLAGS_u-boot-x86-16bit-spl.bin := -O binary -j .start16 -j .resetvec
$(obj)/u-boot-x86-16bit-spl.bin: $(obj)/u-boot-spl FORCE
$(call if_changed,objcopy)
LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
# Avoid 'Not enough room for program headers' error on binutils 2.28 onwards.
LDFLAGS_$(SPL_BIN) += $(call ld-option, --no-dynamic-linker)
ifneq ($(CONFIG_SPL_TEXT_BASE),)
LDFLAGS_$(SPL_BIN) += -Ttext $(CONFIG_SPL_TEXT_BASE)
endif
MKIMAGEFLAGS_$(SPL_BIN).sfp = -T socfpgaimage
$(obj)/$(SPL_BIN).sfp: $(obj)/$(SPL_BIN).bin FORCE
$(call if_changed,mkimage)
quiet_cmd_mksunxiboot = MKSUNXI $@
cmd_mksunxiboot = $(objtree)/tools/mksunxiboot $< $@
$(obj)/sunxi-spl.bin: $(obj)/$(SPL_BIN).bin FORCE
$(call if_changed,mksunxiboot)
quiet_cmd_sunxi_spl_image_builder = SUNXI_SPL_IMAGE_BUILDER $@
cmd_sunxi_spl_image_builder = $(objtree)/tools/sunxi-spl-image-builder \
-c $(CONFIG_NAND_SUNXI_SPL_ECC_STRENGTH)/$(CONFIG_NAND_SUNXI_SPL_ECC_SIZE) \
-p $(CONFIG_SYS_NAND_PAGE_SIZE) \
-o $(CONFIG_SYS_NAND_OOBSIZE) \
-u $(CONFIG_NAND_SUNXI_SPL_USABLE_PAGE_SIZE) \
-e $(CONFIG_SYS_NAND_BLOCK_SIZE) \
-s -b $< $@
$(obj)/sunxi-spl-with-ecc.bin: $(obj)/sunxi-spl.bin
$(call if_changed,sunxi_spl_image_builder)
# Rule to link u-boot-spl
# May be overridden by arch/$(ARCH)/config.mk
quiet_cmd_u-boot-spl ?= LD $@
cmd_u-boot-spl ?= (cd $(obj) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
$(patsubst $(obj)/%,%,$(u-boot-spl-init)) --start-group \
$(patsubst $(obj)/%,%,$(u-boot-spl-main)) \
$(patsubst $(obj)/%,%,$(u-boot-spl-platdata)) \
--end-group \
$(PLATFORM_LIBS) -Map $(SPL_BIN).map -o $(SPL_BIN))
$(obj)/$(SPL_BIN): $(u-boot-spl-platdata) $(u-boot-spl-init) \
$(u-boot-spl-main) $(obj)/u-boot-spl.lds FORCE
$(call if_changed,u-boot-spl)
$(sort $(u-boot-spl-init) $(u-boot-spl-main)): $(u-boot-spl-dirs) ;
PHONY += $(u-boot-spl-dirs)
$(u-boot-spl-dirs): $(u-boot-spl-platdata)
$(Q)$(MAKE) $(build)=$@
quiet_cmd_cpp_lds = LDS $@
cmd_cpp_lds = $(CPP) -Wp,-MD,$(depfile) $(cpp_flags) $(LDPPFLAGS) -ansi \
-D__ASSEMBLY__ -x assembler-with-cpp -P -o $@ $<
$(obj)/u-boot-spl.lds: $(LDSCRIPT) FORCE
$(call if_changed_dep,cpp_lds)
# read all saved command lines
targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard $(obj)/.*.cmd $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
$(cmd_files): ; # Do not try to update included dependency files
include $(cmd_files)
endif
PHONY += FORCE
FORCE:
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable so we can use it in if_changed and friends.
.PHONY: $(PHONY)