u-boot/drivers/phy/phy-imx8mq-usb.c
Ye Li 4266dc1dff phy: phy-imx8mq-usb: Add USB PHY driver for i.MX8MQ
Add the USB PHY driver for i.MX8MQ to work with DWC3 USB controller.

Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Patrick Wildt <patrick@blueri.se>
Tested-by: Patrick Wildt <patrick@blueri.se>
2021-07-17 13:12:23 +02:00

197 lines
4.8 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2021 NXP
*
*/
#include <common.h>
#include <asm/io.h>
#include <dm.h>
#include <errno.h>
#include <generic-phy.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <clk.h>
#define PHY_CTRL0 0x0
#define PHY_CTRL0_REF_SSP_EN BIT(2)
#define PHY_CTRL0_FSEL_MASK GENMASK(10, 5)
#define PHY_CTRL0_FSEL_24M 0x2a
#define PHY_CTRL0_FSEL_100M 0x27
#define PHY_CTRL0_SSC_RANGE_MASK GENMASK(23, 21)
#define PHY_CTRL0_SSC_RANGE_4003PPM (0x2 << 21)
#define PHY_CTRL1 0x4
#define PHY_CTRL1_RESET BIT(0)
#define PHY_CTRL1_COMMONONN BIT(1)
#define PHY_CTRL1_ATERESET BIT(3)
#define PHY_CTRL1_DCDENB BIT(17)
#define PHY_CTRL1_CHRGSEL BIT(18)
#define PHY_CTRL1_VDATSRCENB0 BIT(19)
#define PHY_CTRL1_VDATDETENB0 BIT(20)
#define PHY_CTRL2 0x8
#define PHY_CTRL2_TXENABLEN0 BIT(8)
#define PHY_CTRL2_OTG_DISABLE BIT(9)
#define PHY_CTRL3 0xc
#define PHY_CTRL3_COMPDISTUNE_MASK GENMASK(2, 0)
#define PHY_CTRL3_TXPREEMP_TUNE_MASK GENMASK(16, 15)
#define PHY_CTRL3_TXPREEMP_TUNE_SHIFT 15
#define PHY_CTRL3_TXRISE_TUNE_MASK GENMASK(21, 20)
#define PHY_CTRL3_TXRISE_TUNE_SHIFT 20
/* 1111: +24% ... 0000: -6% step: 2% */
#define PHY_CTRL3_TXVREF_TUNE_MASK GENMASK(25, 22)
#define PHY_CTRL3_TXVREF_TUNE_SHIFT 22
#define PHY_CTRL3_TX_VBOOST_LEVEL_MASK GENMASK(31, 29)
#define PHY_CTRL3_TX_VBOOST_LEVEL_SHIFT 29
#define PHY_CTRL4 0x10
#define PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_MASK GENMASK(20, 15)
#define PHY_CTRL4_PCS_TX_DEEMPH_3P5DB_SHIFT 15
#define PHY_CTRL5 0x14
#define PHY_CTRL5_DMPWD_OVERRIDE_SEL BIT(23)
#define PHY_CTRL5_DMPWD_OVERRIDE BIT(22)
#define PHY_CTRL5_DPPWD_OVERRIDE_SEL BIT(21)
#define PHY_CTRL5_DPPWD_OVERRIDE BIT(20)
#define PHY_CTRL5_PCS_TX_SWING_FULL_MASK GENMASK(6, 0)
#define PHY_CTRL6 0x18
#define PHY_CTRL6_RXTERM_OVERRIDE_SEL BIT(29)
#define PHY_CTRL6_ALT_CLK_EN BIT(1)
#define PHY_CTRL6_ALT_CLK_SEL BIT(0)
#define PHY_STS0 0x40
#define PHY_STS0_OTGSESSVLD BIT(7)
#define PHY_STS0_CHGDET BIT(4)
#define PHY_STS0_FSVPLUS BIT(3)
#define PHY_STS0_FSVMINUS BIT(2)
struct imx8mq_usb_phy {
#if CONFIG_IS_ENABLED(CLK)
struct clk phy_clk;
#endif
void __iomem *base;
};
static const struct udevice_id imx8mq_usb_phy_of_match[] = {
{
.compatible = "fsl,imx8mq-usb-phy",
},
{},
};
static int imx8mq_usb_phy_init(struct phy *usb_phy)
{
struct udevice *dev = usb_phy->dev;
struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev);
u32 value;
value = readl(imx_phy->base + PHY_CTRL1);
value &= ~(PHY_CTRL1_VDATSRCENB0 | PHY_CTRL1_VDATDETENB0 |
PHY_CTRL1_COMMONONN);
value |= PHY_CTRL1_RESET | PHY_CTRL1_ATERESET;
writel(value, imx_phy->base + PHY_CTRL1);
value = readl(imx_phy->base + PHY_CTRL0);
value |= PHY_CTRL0_REF_SSP_EN;
value &= ~PHY_CTRL0_SSC_RANGE_MASK;
value |= PHY_CTRL0_SSC_RANGE_4003PPM;
writel(value, imx_phy->base + PHY_CTRL0);
value = readl(imx_phy->base + PHY_CTRL2);
value |= PHY_CTRL2_TXENABLEN0;
writel(value, imx_phy->base + PHY_CTRL2);
value = readl(imx_phy->base + PHY_CTRL1);
value &= ~(PHY_CTRL1_RESET | PHY_CTRL1_ATERESET);
writel(value, imx_phy->base + PHY_CTRL1);
return 0;
}
static int imx8mq_usb_phy_power_on(struct phy *usb_phy)
{
struct udevice *dev = usb_phy->dev;
struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev);
u32 value;
#if CONFIG_IS_ENABLED(CLK)
int ret;
ret = clk_enable(&imx_phy->phy_clk);
if (ret) {
printf("Failed to enable usb phy clock\n");
return ret;
}
#endif
/* Disable rx term override */
value = readl(imx_phy->base + PHY_CTRL6);
value &= ~PHY_CTRL6_RXTERM_OVERRIDE_SEL;
writel(value, imx_phy->base + PHY_CTRL6);
return 0;
}
static int imx8mq_usb_phy_power_off(struct phy *usb_phy)
{
struct udevice *dev = usb_phy->dev;
struct imx8mq_usb_phy *imx_phy = dev_get_priv(dev);
u32 value;
/* Override rx term to be 0 */
value = readl(imx_phy->base + PHY_CTRL6);
value |= PHY_CTRL6_RXTERM_OVERRIDE_SEL;
writel(value, imx_phy->base + PHY_CTRL6);
#if CONFIG_IS_ENABLED(CLK)
clk_disable(&imx_phy->phy_clk);
#endif
return 0;
}
static int imx8mq_usb_phy_exit(struct phy *usb_phy)
{
return imx8mq_usb_phy_power_off(usb_phy);
}
struct phy_ops imx8mq_usb_phy_ops = {
.init = imx8mq_usb_phy_init,
.power_on = imx8mq_usb_phy_power_on,
.power_off = imx8mq_usb_phy_power_off,
.exit = imx8mq_usb_phy_exit,
};
int imx8mq_usb_phy_probe(struct udevice *dev)
{
struct imx8mq_usb_phy *priv = dev_get_priv(dev);
priv->base = dev_read_addr_ptr(dev);
if (!priv->base)
return -EINVAL;
#if CONFIG_IS_ENABLED(CLK)
int ret;
/* Assigned clock already set clock */
ret = clk_get_by_name(dev, "phy", &priv->phy_clk);
if (ret) {
printf("Failed to get usb phy clock\n");
return ret;
}
#endif
return 0;
}
U_BOOT_DRIVER(nxp_imx8mq_usb_phy) = {
.name = "nxp_imx8mq_usb_phy",
.id = UCLASS_PHY,
.of_match = imx8mq_usb_phy_of_match,
.probe = imx8mq_usb_phy_probe,
.ops = &imx8mq_usb_phy_ops,
.priv_auto = sizeof(struct imx8mq_usb_phy),
};