mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 23:02:59 +00:00
55c7a765f6
Add support for the Terasic DE0-Nano/Atlas-SoC Kit, which is a CycloneV based board. The board can boot from SD/MMC. Ethernet is also supported. Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
72 lines
1.4 KiB
C
72 lines
1.4 KiB
C
/*
|
|
* Copyright (C) 2012 Altera Corporation <www.altera.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#include <micrel.h>
|
|
#include <netdev.h>
|
|
#include <phy.h>
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
void s_init(void) {}
|
|
|
|
/*
|
|
* Miscellaneous platform dependent initialisations
|
|
*/
|
|
int board_init(void)
|
|
{
|
|
/* Address of boot parameters for ATAG (if ATAG is used) */
|
|
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* PHY configuration
|
|
*/
|
|
#ifdef CONFIG_PHY_MICREL_KSZ9031
|
|
int board_phy_config(struct phy_device *phydev)
|
|
{
|
|
int ret;
|
|
/*
|
|
* These skew settings for the KSZ9021 ethernet phy is required for ethernet
|
|
* to work reliably on most flavors of cyclone5 boards.
|
|
*/
|
|
ret = ksz9031_phy_extended_write(phydev, 0x2,
|
|
MII_KSZ9031_EXT_RGMII_CTRL_SIG_SKEW,
|
|
MII_KSZ9031_MOD_DATA_NO_POST_INC,
|
|
0x70);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ksz9031_phy_extended_write(phydev, 0x2,
|
|
MII_KSZ9031_EXT_RGMII_RX_DATA_SKEW,
|
|
MII_KSZ9031_MOD_DATA_NO_POST_INC,
|
|
0x7777);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ksz9031_phy_extended_write(phydev, 0x2,
|
|
MII_KSZ9031_EXT_RGMII_TX_DATA_SKEW,
|
|
MII_KSZ9031_MOD_DATA_NO_POST_INC,
|
|
0);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ksz9031_phy_extended_write(phydev, 0x2,
|
|
MII_KSZ9031_EXT_RGMII_CLOCK_SKEW,
|
|
MII_KSZ9031_MOD_DATA_NO_POST_INC,
|
|
0x03FC);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (phydev->drv->config)
|
|
return phydev->drv->config(phydev);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|