u-boot/include/configs/sh7757lcr.h
Tom Rini 306881a0bf Convert CONFIG_PHYLIB et al to Kconfig
This converts the following to Kconfig:
   CONFIG_PHYLIB
   CONFIG_BITBANGMII
   CONFIG_MV88E6352_SWITCH
   CONFIG_MV88E61XX_SWITCH
   CONFIG_PHYLIB_10G
   CONFIG_PHY_AQUANTIA
   CONFIG_PHY_ATHEROS
   CONFIG_PHY_BROADCOM
   CONFIG_PHY_CORTINA
   CONFIG_PHY_DAVICOM
   CONFIG_PHY_ET1011C
   CONFIG_PHY_LXT
   CONFIG_PHY_MARVELL
   CONFIG_PHY_MICREL
   CONFIG_PHY_NATSEMI
   CONFIG_PHY_REALTEK
   CONFIG_RTL8211X_PHY_FORCE_MASTER
   CONFIG_PHY_SMSC
   CONFIG_PHY_TERANETICS
   CONFIG_PHY_TI
   CONFIG_PHY_VITESSE
   CONFIG_PHY_XILINX

Signed-off-by: Tom Rini <trini@konsulko.com>
2020-04-28 15:57:58 -04:00

83 lines
2.4 KiB
C

/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Configuation settings for the sh7757lcr board
*
* Copyright (C) 2011 Renesas Solutions Corp.
*/
#ifndef __SH7757LCR_H
#define __SH7757LCR_H
#define CONFIG_CPU_SH7757 1
#define CONFIG_SH7757LCR_DDR_ECC 1
#define CONFIG_DISPLAY_BOARDINFO
/* MEMORY */
#define SH7757LCR_SDRAM_BASE (0x80000000)
#define SH7757LCR_SDRAM_SIZE (240 * 1024 * 1024)
#define SH7757LCR_SDRAM_ECC_SETTING 0x0f000000 /* 240MByte */
#define SH7757LCR_SDRAM_DVC_SIZE (16 * 1024 * 1024)
#define CONFIG_SYS_PBSIZE 256
#define CONFIG_SYS_BAUDRATE_TABLE { 115200 }
/* SCIF */
#define CONFIG_CONS_SCIF2 1
#define CONFIG_SYS_MEMTEST_START (SH7757LCR_SDRAM_BASE)
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
224 * 1024 * 1024)
#undef CONFIG_SYS_MEMTEST_SCRATCH
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
#define CONFIG_SYS_SDRAM_BASE (SH7757LCR_SDRAM_BASE)
#define CONFIG_SYS_SDRAM_SIZE (SH7757LCR_SDRAM_SIZE)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + \
(128 + 16) * 1024 * 1024)
#define CONFIG_SYS_MONITOR_BASE 0x00000000
#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
/* Ether */
#define CONFIG_SH_ETHER_USE_PORT 0
#define CONFIG_SH_ETHER_PHY_ADDR 1
#define CONFIG_SH_ETHER_CACHE_WRITEBACK 1
#define CONFIG_BITBANGMII_MULTI
#define CONFIG_SH_ETHER_PHY_MODE PHY_INTERFACE_MODE_MII
#define SH7757LCR_ETHERNET_MAC_BASE_SPI 0x000b0000
#define SH7757LCR_SPI_SECTOR_SIZE (64 * 1024)
#define SH7757LCR_ETHERNET_MAC_BASE SH7757LCR_ETHERNET_MAC_BASE_SPI
#define SH7757LCR_ETHERNET_MAC_SIZE 17
#define SH7757LCR_ETHERNET_NUM_CH 2
/* Gigabit Ether */
#define SH7757LCR_GIGA_ETHERNET_NUM_CH 2
/* SPI */
#define CONFIG_SH_SPI_BASE 0xfe002000
/* MMCIF */
#define CONFIG_SH_MMCIF_ADDR 0xffcb0000
#define CONFIG_SH_MMCIF_CLK 48000000
/* SH7757 board */
#define SH7757LCR_SDRAM_PHYS_TOP 0x40000000
#define SH7757LCR_GRA_OFFSET 0x1f000000
#define SH7757LCR_PCIEBRG_ADDR_B0 0x000a0000
#define SH7757LCR_PCIEBRG_SIZE_B0 (64 * 1024)
#define SH7757LCR_PCIEBRG_ADDR 0x00090000
#define SH7757LCR_PCIEBRG_SIZE (96 * 1024)
/* ENV setting */
#define CONFIG_ENV_OVERWRITE 1
#define CONFIG_EXTRA_ENV_SETTINGS \
"netboot=bootp; bootm\0"
/* Board Clock */
#define CONFIG_SYS_CLK_FREQ 48000000
#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
#endif /* __SH7757LCR_H */