u-boot/board/freescale/mx25pdk/mx25pdk.c
Fabio Estevam cabe240b59 mx25pdk: Adapt it for the new PMIC framework
Make the necessary adaptions for the new PMIC framework, so that mx25pdk can
be built again.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-12-11 17:41:19 +01:00

177 lines
4.2 KiB
C

/*
* (C) Copyright 2011 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <common.h>
#include <asm/io.h>
#include <asm/gpio.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/imx25-pinmux.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/clock.h>
#include <mmc.h>
#include <fsl_esdhc.h>
#include <i2c.h>
#include <power/pmic.h>
#include <fsl_pmic.h>
#include <mc34704.h>
#define FEC_RESET_B IMX_GPIO_NR(2, 3)
#define FEC_ENABLE_B IMX_GPIO_NR(4, 8)
#define CARD_DETECT IMX_GPIO_NR(2, 1)
DECLARE_GLOBAL_DATA_PTR;
#ifdef CONFIG_FSL_ESDHC
struct fsl_esdhc_cfg esdhc_cfg[1] = {
{IMX_MMC_SDHC1_BASE},
};
#endif
static void mx25pdk_fec_init(void)
{
struct iomuxc_mux_ctl *muxctl;
struct iomuxc_pad_ctl *padctl;
u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
u32 gpio_mux_mode0_sion = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
/* FEC pin init is generic */
mx25_fec_init_pins();
muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
/*
* Set up FEC_RESET_B and FEC_ENABLE_B
*
* FEC_RESET_B: gpio2_3 is ALT 5 mode of pin D12
* FEC_ENABLE_B: gpio4_8 is ALT 5 mode of pin A17
*/
writel(gpio_mux_mode, &muxctl->pad_d12);
writel(gpio_mux_mode, &muxctl->pad_a17);
writel(0x0, &padctl->pad_d12);
writel(0x0, &padctl->pad_a17);
/* Assert RESET and ENABLE low */
gpio_direction_output(FEC_RESET_B, 0);
gpio_direction_output(FEC_ENABLE_B, 0);
udelay(10);
/* Deassert RESET and ENABLE */
gpio_set_value(FEC_RESET_B, 1);
gpio_set_value(FEC_ENABLE_B, 1);
/* Setup I2C pins so that PMIC can turn on PHY supply */
writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_clk);
writel(gpio_mux_mode0_sion, &muxctl->pad_i2c1_dat);
writel(0x1E8, &padctl->pad_i2c1_clk);
writel(0x1E8, &padctl->pad_i2c1_dat);
}
int dram_init(void)
{
/* dram_init must store complete ramsize in gd->ram_size */
gd->ram_size = get_ram_size((void *)CONFIG_SYS_SDRAM_BASE,
PHYS_SDRAM_1_SIZE);
return 0;
}
int board_early_init_f(void)
{
mx25_uart1_init_pins();
return 0;
}
int board_init(void)
{
/* address of boot parameters */
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
return 0;
}
int board_late_init(void)
{
struct pmic *p;
int ret;
mx25pdk_fec_init();
ret = pmic_init(I2C_PMIC);
if (ret)
return ret;
p = pmic_get("FSL_PMIC");
if (!p)
return -ENODEV;
/* Turn on Ethernet PHY supply */
pmic_reg_write(p, MC34704_GENERAL2_REG, ONOFFE);
return 0;
}
#ifdef CONFIG_FSL_ESDHC
int board_mmc_getcd(struct mmc *mmc)
{
struct iomuxc_mux_ctl *muxctl;
struct iomuxc_pad_ctl *padctl;
u32 gpio_mux_mode = MX25_PIN_MUX_MODE(5);
/*
* Set up the Card Detect pin.
*
* SD1_GPIO_CD: gpio2_1 is ALT 5 mode of pin A15
*
*/
muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
padctl = (struct iomuxc_pad_ctl *)IMX_IOPADCTL_BASE;
writel(gpio_mux_mode, &muxctl->pad_a15);
writel(0x0, &padctl->pad_a15);
gpio_direction_input(CARD_DETECT);
return !gpio_get_value(CARD_DETECT);
}
int board_mmc_init(bd_t *bis)
{
struct iomuxc_mux_ctl *muxctl;
u32 sdhc1_mux_mode = MX25_PIN_MUX_MODE(0) | MX25_PIN_MUX_SION;
muxctl = (struct iomuxc_mux_ctl *)IMX_IOPADMUX_BASE;
writel(sdhc1_mux_mode, &muxctl->pad_sd1_cmd);
writel(sdhc1_mux_mode, &muxctl->pad_sd1_clk);
writel(sdhc1_mux_mode, &muxctl->pad_sd1_data0);
writel(sdhc1_mux_mode, &muxctl->pad_sd1_data1);
writel(sdhc1_mux_mode, &muxctl->pad_sd1_data2);
writel(sdhc1_mux_mode, &muxctl->pad_sd1_data3);
esdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC1_CLK);
return fsl_esdhc_initialize(bis, &esdhc_cfg[0]);
}
#endif
int checkboard(void)
{
puts("Board: MX25PDK\n");
return 0;
}