2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-24 12:03:39 +00:00
u-boot/board/emulation/qemu-arm/qemu-arm.c
Simon Glass 662cfa03cb arm: qemu: Move GUIDs to the C file
These are only used in one place, so move them there.

Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-06 13:04:53 -05:00

191 lines
3.6 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) 2017 Tuomas Tynkkynen
*/
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
#include <efi.h>
#include <efi_loader.h>
#include <fdtdec.h>
#include <init.h>
#include <log.h>
#include <virtio_types.h>
#include <virtio.h>
#include <linux/kernel.h>
#include <linux/sizes.h>
/* GUIDs for capsule updatable firmware images */
#define QEMU_ARM_UBOOT_IMAGE_GUID \
EFI_GUID(0xf885b085, 0x99f8, 0x45af, 0x84, 0x7d, \
0xd5, 0x14, 0x10, 0x7a, 0x4a, 0x2c)
#define QEMU_ARM64_UBOOT_IMAGE_GUID \
EFI_GUID(0x058b7d83, 0x50d5, 0x4c47, 0xa1, 0x95, \
0x60, 0xd8, 0x6a, 0xd3, 0x41, 0xc4)
#ifdef CONFIG_ARM64
#include <asm/armv8/mmu.h>
#if CONFIG_IS_ENABLED(EFI_HAVE_CAPSULE_SUPPORT)
struct efi_fw_image fw_images[] = {
#if defined(CONFIG_TARGET_QEMU_ARM_32BIT)
{
.image_type_id = QEMU_ARM_UBOOT_IMAGE_GUID,
.fw_name = u"Qemu-Arm-UBOOT",
.image_index = 1,
},
#elif defined(CONFIG_TARGET_QEMU_ARM_64BIT)
{
.image_type_id = QEMU_ARM64_UBOOT_IMAGE_GUID,
.fw_name = u"Qemu-Arm-UBOOT",
.image_index = 1,
},
#endif
};
struct efi_capsule_update_info update_info = {
.images = fw_images,
};
u8 num_image_type_guids = ARRAY_SIZE(fw_images);
#endif /* EFI_HAVE_CAPSULE_SUPPORT */
static struct mm_region qemu_arm64_mem_map[] = {
{
/* Flash */
.virt = 0x00000000UL,
.phys = 0x00000000UL,
.size = 0x08000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
/* Lowmem peripherals */
.virt = 0x08000000UL,
.phys = 0x08000000UL,
.size = 0x38000000,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* RAM */
.virt = 0x40000000UL,
.phys = 0x40000000UL,
.size = 255UL * SZ_1G,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
/* Highmem PCI-E ECAM memory area */
.virt = 0x4010000000ULL,
.phys = 0x4010000000ULL,
.size = 0x10000000,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* Highmem PCI-E MMIO memory area */
.virt = 0x8000000000ULL,
.phys = 0x8000000000ULL,
.size = 0x8000000000ULL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = qemu_arm64_mem_map;
#endif
int board_init(void)
{
return 0;
}
int board_late_init(void)
{
/*
* Make sure virtio bus is enumerated so that peripherals
* on the virtio bus can be discovered by their drivers
*/
virtio_init();
return 0;
}
int dram_init(void)
{
if (fdtdec_setup_mem_size_base() != 0)
return -EINVAL;
return 0;
}
int dram_init_banksize(void)
{
fdtdec_setup_memory_banksize();
return 0;
}
void *board_fdt_blob_setup(int *err)
{
*err = 0;
/* QEMU loads a generated DTB for us at the start of RAM. */
return (void *)CFG_SYS_SDRAM_BASE;
}
void enable_caches(void)
{
icache_enable();
dcache_enable();
}
#ifdef CONFIG_ARM64
#define __W "w"
#else
#define __W
#endif
u8 flash_read8(void *addr)
{
u8 ret;
asm("ldrb %" __W "0, %1" : "=r"(ret) : "m"(*(u8 *)addr));
return ret;
}
u16 flash_read16(void *addr)
{
u16 ret;
asm("ldrh %" __W "0, %1" : "=r"(ret) : "m"(*(u16 *)addr));
return ret;
}
u32 flash_read32(void *addr)
{
u32 ret;
asm("ldr %" __W "0, %1" : "=r"(ret) : "m"(*(u32 *)addr));
return ret;
}
void flash_write8(u8 value, void *addr)
{
asm("strb %" __W "1, %0" : "=m"(*(u8 *)addr) : "r"(value));
}
void flash_write16(u16 value, void *addr)
{
asm("strh %" __W "1, %0" : "=m"(*(u16 *)addr) : "r"(value));
}
void flash_write32(u32 value, void *addr)
{
asm("str %" __W "1, %0" : "=m"(*(u32 *)addr) : "r"(value));
}