2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-12-24 20:13:39 +00:00
u-boot/board/bsh/imx6ulz_smm_m2/spl.c
Michael Trimarchi cc74cab86a bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards
Introduce BSH SystemMaster (SMM) M2 board family, which consists of:
imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards.

Add support for imx6ulz BSH SMM M2 board:

- 128 MiB DDR3 RAM
- 256MiB Nand
- USBOTG1 peripheral - fastboot.

Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Fabio Estevam <festevam@denx.de>
2022-09-18 22:56:18 +02:00

130 lines
3.1 KiB
C

// SPDX-License-Identifier: GPL-2.0+
#include <common.h>
#include <cpu_func.h>
#include <hang.h>
#include <init.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/mx6ull_pins.h>
#include <asm/arch/mx6-pins.h>
#include <asm/arch/sys_proto.h>
#include <asm/gpio.h>
#include <asm/mach-imx/iomux-v3.h>
#include <asm/mach-imx/boot_mode.h>
#include <linux/libfdt.h>
#include <spl.h>
#include <asm/arch/mx6-ddr.h>
#define UART_PAD_CTRL (PAD_CTL_PKE | PAD_CTL_PUE | \
PAD_CTL_PUS_100K_UP | PAD_CTL_SPEED_MED | \
PAD_CTL_DSE_40ohm | PAD_CTL_SRE_FAST | PAD_CTL_HYS)
static const iomux_v3_cfg_t uart4_pads[] = {
MX6_PAD_UART4_TX_DATA__UART4_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL),
MX6_PAD_UART4_RX_DATA__UART4_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL),
};
static void setup_iomux_uart(void)
{
imx_iomux_v3_setup_multiple_pads(uart4_pads, ARRAY_SIZE(uart4_pads));
}
static struct mx6ul_iomux_grp_regs mx6_grp_ioregs = {
.grp_addds = 0x00000028,
.grp_ddrmode_ctl = 0x00020000,
.grp_b0ds = 0x00000028,
.grp_ctlds = 0x00000028,
.grp_b1ds = 0x00000028,
.grp_ddrpke = 0x00000000,
.grp_ddrmode = 0x00020000,
.grp_ddr_type = 0x000c0000,
};
static struct mx6ul_iomux_ddr_regs mx6_ddr_ioregs = {
.dram_dqm0 = 0x00000028,
.dram_dqm1 = 0x00000028,
.dram_ras = 0x00000028,
.dram_cas = 0x00000028,
.dram_odt0 = 0x00000028,
.dram_odt1 = 0x00000028,
.dram_sdba2 = 0x00000000,
.dram_sdclk_0 = 0x00000028,
.dram_sdqs0 = 0x00000028,
.dram_sdqs1 = 0x00000028,
.dram_reset = 0x000c0028,
};
static struct mx6_mmdc_calibration mx6_mmcd_calib = {
.p0_mpwldectrl0 = 0x00000000,
.p0_mpwldectrl1 = 0x00100010,
.p0_mpdgctrl0 = 0x414c014c,
.p0_mpdgctrl1 = 0x00000000,
.p0_mprddlctl = 0x40403a42,
.p0_mpwrdlctl = 0x4040342e,
};
static struct mx6_ddr_sysinfo ddr_sysinfo = {
.dsize = 0,
.cs1_mirror = 0,
.cs_density = 32,
.ncs = 1,
.bi_on = 1,
.rtt_nom = 1,
.rtt_wr = 0,
.ralat = 5,
.walat = 1,
.mif3_mode = 3,
.rst_to_cke = 0x23, /* 33 cycles (JEDEC value for DDR3) - total of 500 us */
.sde_to_rst = 0x10, /* 14 cycles (JEDEC value for DDR3) - total of 200 us */
.refsel = 1,
.refr = 3,
};
static struct mx6_ddr3_cfg mem_ddr = {
.mem_speed = 1333,
.density = 2,
.width = 16,
.banks = 8,
.rowaddr = 13,
.coladdr = 10,
.pagesz = 2,
.trcd = 1350,
.trcmin = 4950,
.trasmin = 3600,
};
static void ccgr_init(void)
{
struct mxc_ccm_reg *ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR;
writel(0xFFFFFFFF, &ccm->CCGR0);
writel(0xFFFFFFFF, &ccm->CCGR1);
writel(0xFFFFFFFF, &ccm->CCGR2);
writel(0xFFFFFFFF, &ccm->CCGR3);
writel(0xFFFFFFFF, &ccm->CCGR4);
writel(0xFFFFFFFF, &ccm->CCGR5);
writel(0xFFFFFFFF, &ccm->CCGR6);
}
static void imx6ul_spl_dram_cfg(void)
{
mx6ul_dram_iocfg(mem_ddr.width, &mx6_ddr_ioregs, &mx6_grp_ioregs);
mx6_dram_cfg(&ddr_sysinfo, &mx6_mmcd_calib, &mem_ddr);
}
void board_init_f(ulong dummy)
{
ccgr_init();
arch_cpu_init();
timer_init();
setup_iomux_uart();
preloader_console_init();
imx6ul_spl_dram_cfg();
}
void reset_cpu(void)
{
}