mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 07:34:31 +00:00
3fad1ca28d
This is an MT7623A-based board, very similar to the Banana Pi R2. http://www.unielecinc.com/q/news/cn/p/product/detail.html?qd_guid=OjXwKCaRlN Signed-off-by: David Woodhouse <dwmw2@infradead.org>
211 lines
3.5 KiB
Text
211 lines
3.5 KiB
Text
/*
|
|
* Copyright (C) 2018 MediaTek Inc.
|
|
* Author: Ryder Lee <ryder.lee@mediatek.com>
|
|
*
|
|
* SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
|
*/
|
|
|
|
/dts-v1/;
|
|
#include "mt7623.dtsi"
|
|
#include "mt7623-u-boot.dtsi"
|
|
|
|
/ {
|
|
model = "UniElec U7623-02 eMMC";
|
|
compatible = "unielec,u7623-02-emmc", "mediatek,mt7623";
|
|
|
|
memory@80000000 {
|
|
device_type = "memory";
|
|
reg = <0 0x80000000 0 0x20000000>;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart2;
|
|
tick-timer = &timer0;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_5v: regulator-5v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-5V";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led3 {
|
|
label = "u7623-01:green:led3";
|
|
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led4 {
|
|
label = "u7623-01:green:led4";
|
|
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
mediatek,gmac-id = <0>;
|
|
phy-mode = "rgmii";
|
|
mediatek,switch = "mt7530";
|
|
mediatek,mcm;
|
|
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
status = "okay";
|
|
bus-width = <8>;
|
|
max-frequency = <50000000>;
|
|
cap-mmc-highspeed;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
non-removable;
|
|
};
|
|
|
|
&pinctrl {
|
|
ephy_default: ephy_default {
|
|
mux {
|
|
function = "eth";
|
|
groups = "mdc_mdio", "ephy";
|
|
};
|
|
|
|
conf {
|
|
pins = "G2_TXEN", "G2_TXD0", "G2_TXD1", "G2_TXD2",
|
|
"G2_TXD3", "G2_TXC", "G2_RXC", "G2_RXD0",
|
|
"G2_RXD1", "G2_RXD2", "G2_RXD3", "G2_RXDV",
|
|
"MDC", "MDIO";
|
|
drive-strength = <12>;
|
|
mediatek,tdsel = <5>;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_default: mmc0default {
|
|
mux {
|
|
function = "msdc";
|
|
groups = "msdc0";
|
|
};
|
|
|
|
conf-cmd-data {
|
|
pins = "MSDC0_CMD", "MSDC0_DAT0", "MSDC0_DAT1",
|
|
"MSDC0_DAT2", "MSDC0_DAT3", "MSDC0_DAT4",
|
|
"MSDC0_DAT5", "MSDC0_DAT6", "MSDC0_DAT7";
|
|
input-enable;
|
|
bias-pull-up;
|
|
};
|
|
|
|
conf-clk {
|
|
pins = "MSDC0_CLK";
|
|
bias-pull-down;
|
|
};
|
|
|
|
conf-rst {
|
|
pins = "MSDC0_RSTB";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
pcie_default: pcie-default {
|
|
mux {
|
|
function = "pcie";
|
|
groups = "pcie0_0_perst", "pcie1_0_perst";
|
|
};
|
|
};
|
|
|
|
uart0_pins_a: uart0-default {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart0_0_txd_rxd";
|
|
};
|
|
};
|
|
|
|
uart1_pins_a: uart1-default {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart1_0_txd_rxd";
|
|
};
|
|
};
|
|
|
|
uart2_pins_a: uart2-default {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart2_0_txd_rxd";
|
|
};
|
|
};
|
|
|
|
uart2_pins_b: uart2-alt {
|
|
mux {
|
|
function = "uart";
|
|
groups = "uart2_1_txd_rxd";
|
|
};
|
|
};
|
|
};
|
|
|
|
&pcie {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pcie_default>;
|
|
status = "okay";
|
|
|
|
pcie@0,0 {
|
|
status = "okay";
|
|
};
|
|
|
|
pcie@1,0 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
&pcie0_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&pcie1_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart0_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart1_pins_a>;
|
|
status = "okay";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&uart2_pins_b>;
|
|
status = "okay";
|
|
};
|