mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 17:58:23 +00:00
699 lines
16 KiB
C
699 lines
16 KiB
C
/*
|
|
* amirix.c: ppcboot platform support for AMIRIX board
|
|
*
|
|
* Copyright 2002 Mind NV
|
|
* Copyright 2003 AMIRIX Systems Inc.
|
|
*
|
|
* http://www.mind.be/
|
|
* http://www.amirix.com/
|
|
*
|
|
* Author : Peter De Schrijver (p2@mind.be)
|
|
* Frank Smith (smith@amirix.com)
|
|
*
|
|
* Derived from : Other platform support files in this tree, ml2
|
|
*
|
|
* This software may be used and distributed according to the terms of
|
|
* the GNU General Public License (GPL) version 2, incorporated herein by
|
|
* reference. Drivers based on or derived from this code fall under the GPL
|
|
* and must retain the authorship, copyright and this license notice. This
|
|
* file is not a complete program and may only be used when the entire
|
|
* program is licensed under the GPL.
|
|
*
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <command.h>
|
|
#include <asm/processor.h>
|
|
|
|
#include "powerspan.h"
|
|
#include "ap1000.h"
|
|
|
|
int board_pre_init (void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/** serial number and platform display at startup */
|
|
int checkboard (void)
|
|
{
|
|
char *s = getenv ("serial#");
|
|
char *e;
|
|
|
|
/* After a loadace command, the SystemAce control register is left in a wonky state. */
|
|
/* this code did not work in board_pre_init */
|
|
unsigned char *p = (unsigned char *) AP1000_SYSACE_REGBASE;
|
|
|
|
p[SYSACE_CTRLREG0] = 0x0;
|
|
|
|
/* add platform and device to banner */
|
|
switch (get_device ()) {
|
|
case AP1xx_AP107_TARGET:
|
|
puts (AP1xx_AP107_TARGET_STR);
|
|
break;
|
|
case AP1xx_AP120_TARGET:
|
|
puts (AP1xx_AP120_TARGET_STR);
|
|
break;
|
|
case AP1xx_AP130_TARGET:
|
|
puts (AP1xx_AP130_TARGET_STR);
|
|
break;
|
|
case AP1xx_AP1070_TARGET:
|
|
puts (AP1xx_AP1070_TARGET_STR);
|
|
break;
|
|
case AP1xx_AP1100_TARGET:
|
|
puts (AP1xx_AP1100_TARGET_STR);
|
|
break;
|
|
default:
|
|
puts (AP1xx_UNKNOWN_STR);
|
|
break;
|
|
}
|
|
puts (AP1xx_TARGET_STR);
|
|
puts (" with ");
|
|
|
|
switch (get_platform ()) {
|
|
case AP100_BASELINE_PLATFORM:
|
|
case AP1000_BASELINE_PLATFORM:
|
|
puts (AP1xx_BASELINE_PLATFORM_STR);
|
|
break;
|
|
case AP1xx_QUADGE_PLATFORM:
|
|
puts (AP1xx_QUADGE_PLATFORM_STR);
|
|
break;
|
|
case AP1xx_MGT_REF_PLATFORM:
|
|
puts (AP1xx_MGT_REF_PLATFORM_STR);
|
|
break;
|
|
case AP1xx_STANDARD_PLATFORM:
|
|
puts (AP1xx_STANDARD_PLATFORM_STR);
|
|
break;
|
|
case AP1xx_DUAL_PLATFORM:
|
|
puts (AP1xx_DUAL_PLATFORM_STR);
|
|
break;
|
|
case AP1xx_BASE_SRAM_PLATFORM:
|
|
puts (AP1xx_BASE_SRAM_PLATFORM_STR);
|
|
break;
|
|
case AP1xx_PCI_PCB_TESTPLATFORM:
|
|
case AP1000_PCI_PCB_TESTPLATFORM:
|
|
puts (AP1xx_PCI_PCB_TESTPLATFORM_STR);
|
|
break;
|
|
case AP1xx_DUAL_GE_MEZZ_TESTPLATFORM:
|
|
puts (AP1xx_DUAL_GE_MEZZ_TESTPLATFORM_STR);
|
|
break;
|
|
case AP1xx_SFP_MEZZ_TESTPLATFORM:
|
|
puts (AP1xx_SFP_MEZZ_TESTPLATFORM_STR);
|
|
break;
|
|
default:
|
|
puts (AP1xx_UNKNOWN_STR);
|
|
break;
|
|
}
|
|
|
|
if ((get_platform () & AP1xx_TESTPLATFORM_MASK) != 0) {
|
|
puts (AP1xx_TESTPLATFORM_STR);
|
|
} else {
|
|
puts (AP1xx_PLATFORM_STR);
|
|
}
|
|
|
|
putc ('\n');
|
|
|
|
puts ("Serial#: ");
|
|
|
|
if (!s) {
|
|
printf ("### No HW ID - assuming AMIRIX");
|
|
} else {
|
|
for (e = s; *e; ++e) {
|
|
if (*e == ' ')
|
|
break;
|
|
}
|
|
|
|
for (; s < e; ++s) {
|
|
putc (*s);
|
|
}
|
|
}
|
|
|
|
putc ('\n');
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
long int initdram (int board_type)
|
|
{
|
|
char *s = getenv ("dramsize");
|
|
|
|
if (s != NULL) {
|
|
if ((s[0] == '0') && ((s[1] == 'x') || (s[1] == 'X'))) {
|
|
s += 2;
|
|
}
|
|
return (long int)simple_strtoul (s, NULL, 16);
|
|
} else {
|
|
/* give all 64 MB */
|
|
return 64 * 1024 * 1024;
|
|
}
|
|
}
|
|
|
|
unsigned int get_platform (void)
|
|
{
|
|
unsigned int *revision_reg_ptr = (unsigned int *) AP1xx_FPGA_REV_ADDR;
|
|
|
|
return (*revision_reg_ptr & AP1xx_PLATFORM_MASK);
|
|
}
|
|
|
|
unsigned int get_device (void)
|
|
{
|
|
unsigned int *revision_reg_ptr = (unsigned int *) AP1xx_FPGA_REV_ADDR;
|
|
|
|
return (*revision_reg_ptr & AP1xx_TARGET_MASK);
|
|
}
|
|
|
|
#if 0 /* loadace is not working; it appears to be a hardware issue with the system ace. */
|
|
/*
|
|
This function loads FPGA configurations from the SystemACE CompactFlash
|
|
*/
|
|
int do_loadace (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
unsigned char *p = (unsigned char *) AP1000_SYSACE_REGBASE;
|
|
int cfg;
|
|
|
|
if ((p[SYSACE_STATREG0] & 0x10) == 0) {
|
|
p[SYSACE_CTRLREG0] = 0x80;
|
|
printf ("\nNo CompactFlash Detected\n\n");
|
|
p[SYSACE_CTRLREG0] = 0x00;
|
|
return 1;
|
|
}
|
|
|
|
/* reset configuration controller: | 0x80 */
|
|
/* select cpflash & ~0x40 */
|
|
/* cfg start | 0x20 */
|
|
/* wait for cfgstart & ~0x10 */
|
|
/* force cfgmode: | 0x08 */
|
|
/* do no force cfgaddr: & ~0x04 */
|
|
/* clear mpulock: & ~0x02 */
|
|
/* do not force lock request & ~0x01 */
|
|
|
|
p[SYSACE_CTRLREG0] = 0x80 | 0x20 | 0x08;
|
|
p[SYSACE_CTRLREG1] = 0x00;
|
|
|
|
/* force config address if arg2 exists */
|
|
if (argc == 2) {
|
|
cfg = simple_strtoul (argv[1], NULL, 10);
|
|
|
|
if (cfg > 7) {
|
|
printf ("\nInvalid Configuration\n\n");
|
|
p[SYSACE_CTRLREG0] = 0x00;
|
|
return 1;
|
|
}
|
|
/* Set config address */
|
|
p[SYSACE_CTRLREG1] = (cfg << 5);
|
|
/* force cfgaddr */
|
|
p[SYSACE_CTRLREG0] |= 0x04;
|
|
|
|
} else {
|
|
cfg = (p[SYSACE_STATREG1] & 0xE0) >> 5;
|
|
}
|
|
|
|
/* release configuration controller */
|
|
printf ("\nLoading V2PRO with config %d...\n", cfg);
|
|
p[SYSACE_CTRLREG0] &= ~0x80;
|
|
|
|
|
|
while ((p[SYSACE_STATREG1] & 0x01) == 0) {
|
|
|
|
if (p[SYSACE_ERRREG0] & 0x80) {
|
|
/* attempting to load an invalid configuration makes the cpflash */
|
|
/* appear to be removed. Reset here to avoid that problem */
|
|
p[SYSACE_CTRLREG0] = 0x80;
|
|
printf ("\nConfiguration %d Read Error\n\n", cfg);
|
|
p[SYSACE_CTRLREG0] = 0x00;
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
p[SYSACE_CTRLREG0] |= 0x20;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/** Console command to display and set the software reconfigure byte
|
|
* <pre>
|
|
* swconfig - display the current value of the software reconfigure byte
|
|
* swconfig [#] - change the software reconfigure byte to #
|
|
* </pre>
|
|
* @param *cmdtp [IN] as passed by run_command (ignored)
|
|
* @param flag [IN] as passed by run_command (ignored)
|
|
* @param argc [IN] as passed by run_command if 1, display, if 2 change
|
|
* @param *argv[] [IN] contains the parameters to use
|
|
* @return
|
|
* <pre>
|
|
* 0 if passed
|
|
* -1 if failed
|
|
* </pre>
|
|
*/
|
|
int do_swconfigbyte (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
unsigned char *sector_buffer = NULL;
|
|
unsigned char input_char;
|
|
int write_result;
|
|
unsigned int input_uint;
|
|
|
|
/* display value if no argument */
|
|
if (argc < 2) {
|
|
printf ("Software configuration byte is currently: 0x%02x\n",
|
|
*((unsigned char *) (SW_BYTE_SECTOR_ADDR +
|
|
SW_BYTE_SECTOR_OFFSET)));
|
|
return 0;
|
|
} else if (argc > 3) {
|
|
printf ("Too many arguments\n");
|
|
return -1;
|
|
}
|
|
|
|
/* if 3 arguments, 3rd argument is the address to use */
|
|
if (argc == 3) {
|
|
input_uint = simple_strtoul (argv[1], NULL, 16);
|
|
sector_buffer = (unsigned char *) input_uint;
|
|
} else {
|
|
sector_buffer = (unsigned char *) DEFAULT_TEMP_ADDR;
|
|
}
|
|
|
|
input_char = simple_strtoul (argv[1], NULL, 0);
|
|
if ((input_char & ~SW_BYTE_MASK) != 0) {
|
|
printf ("Input of 0x%02x will be masked to 0x%02x\n",
|
|
input_char, (input_char & SW_BYTE_MASK));
|
|
input_char = input_char & SW_BYTE_MASK;
|
|
}
|
|
|
|
memcpy (sector_buffer, (void *) SW_BYTE_SECTOR_ADDR,
|
|
SW_BYTE_SECTOR_SIZE);
|
|
sector_buffer[SW_BYTE_SECTOR_OFFSET] = input_char;
|
|
|
|
|
|
printf ("Erasing Flash...");
|
|
if (flash_sect_erase
|
|
(SW_BYTE_SECTOR_ADDR,
|
|
(SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET))) {
|
|
return -1;
|
|
}
|
|
|
|
printf ("Writing to Flash... ");
|
|
write_result =
|
|
flash_write ((char *)sector_buffer, SW_BYTE_SECTOR_ADDR,
|
|
SW_BYTE_SECTOR_SIZE);
|
|
if (write_result != 0) {
|
|
flash_perror (write_result);
|
|
return -1;
|
|
} else {
|
|
printf ("done\n");
|
|
printf ("Software configuration byte is now: 0x%02x\n",
|
|
*((unsigned char *) (SW_BYTE_SECTOR_ADDR +
|
|
SW_BYTE_SECTOR_OFFSET)));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define ONE_SECOND 1000000
|
|
|
|
int do_pause (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
int pause_time;
|
|
unsigned int delay_time;
|
|
int break_loop = 0;
|
|
|
|
/* display value if no argument */
|
|
if (argc < 2) {
|
|
pause_time = 1;
|
|
}
|
|
|
|
else if (argc > 2) {
|
|
printf ("Too many arguments\n");
|
|
return -1;
|
|
} else {
|
|
pause_time = simple_strtoul (argv[1], NULL, 0);
|
|
}
|
|
|
|
printf ("Pausing with a poll time of %d, press any key to reactivate\n", pause_time);
|
|
delay_time = pause_time * ONE_SECOND;
|
|
while (break_loop == 0) {
|
|
udelay (delay_time);
|
|
if (serial_tstc () != 0) {
|
|
break_loop = 1;
|
|
/* eat user key presses */
|
|
while (serial_tstc () != 0) {
|
|
serial_getc ();
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int do_swreconfig (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
printf ("Triggering software reconfigure (software config byte is 0x%02x)...\n",
|
|
*((unsigned char *) (SW_BYTE_SECTOR_ADDR + SW_BYTE_SECTOR_OFFSET)));
|
|
udelay (1000);
|
|
*((unsigned char *) AP1000_CPLD_BASE) = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define GET_DECIMAL(low_byte) ((low_byte >> 5) * 125)
|
|
#define TEMP_BUSY_BIT 0x80
|
|
#define TEMP_LHIGH_BIT 0x40
|
|
#define TEMP_LLOW_BIT 0x20
|
|
#define TEMP_EHIGH_BIT 0x10
|
|
#define TEMP_ELOW_BIT 0x08
|
|
#define TEMP_OPEN_BIT 0x04
|
|
#define TEMP_ETHERM_BIT 0x02
|
|
#define TEMP_LTHERM_BIT 0x01
|
|
|
|
int do_temp_sensor (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
|
|
{
|
|
char cmd;
|
|
int ret_val = 0;
|
|
unsigned char temp_byte;
|
|
int temp;
|
|
int temp_low;
|
|
int low;
|
|
int low_low;
|
|
int high;
|
|
int high_low;
|
|
int therm;
|
|
unsigned char user_data[4] = { 0 };
|
|
int user_data_count = 0;
|
|
int ii;
|
|
|
|
if (argc > 1) {
|
|
cmd = argv[1][0];
|
|
} else {
|
|
cmd = 's'; /* default to status */
|
|
}
|
|
|
|
user_data_count = argc - 2;
|
|
for (ii = 0; ii < user_data_count; ii++) {
|
|
user_data[ii] = simple_strtoul (argv[2 + ii], NULL, 0);
|
|
}
|
|
switch (cmd) {
|
|
case 's':
|
|
if (I2CAccess
|
|
(0x2, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
printf ("Status : 0x%02x ", temp_byte);
|
|
if (temp_byte & TEMP_BUSY_BIT)
|
|
printf ("BUSY ");
|
|
|
|
if (temp_byte & TEMP_LHIGH_BIT)
|
|
printf ("LHIGH ");
|
|
|
|
if (temp_byte & TEMP_LLOW_BIT)
|
|
printf ("LLOW ");
|
|
|
|
if (temp_byte & TEMP_EHIGH_BIT)
|
|
printf ("EHIGH ");
|
|
|
|
if (temp_byte & TEMP_ELOW_BIT)
|
|
printf ("ELOW ");
|
|
|
|
if (temp_byte & TEMP_OPEN_BIT)
|
|
printf ("OPEN ");
|
|
|
|
if (temp_byte & TEMP_ETHERM_BIT)
|
|
printf ("ETHERM ");
|
|
|
|
if (temp_byte & TEMP_LTHERM_BIT)
|
|
printf ("LTHERM");
|
|
|
|
printf ("\n");
|
|
|
|
if (I2CAccess
|
|
(0x3, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
printf ("Config : 0x%02x ", temp_byte);
|
|
|
|
if (I2CAccess
|
|
(0x4, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
printf ("\n");
|
|
goto fail;
|
|
}
|
|
printf ("Conversion: 0x%02x\n", temp_byte);
|
|
if (I2CAccess
|
|
(0x22, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
printf ("Cons Alert: 0x%02x ", temp_byte);
|
|
|
|
if (I2CAccess
|
|
(0x21, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
printf ("\n");
|
|
goto fail;
|
|
}
|
|
printf ("Therm Hyst: %d\n", temp_byte);
|
|
|
|
if (I2CAccess
|
|
(0x0, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
temp = temp_byte;
|
|
if (I2CAccess
|
|
(0x6, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
low = temp_byte;
|
|
if (I2CAccess
|
|
(0x5, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
high = temp_byte;
|
|
if (I2CAccess
|
|
(0x20, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
therm = temp_byte;
|
|
printf ("Local Temp: %2d Low: %2d High: %2d THERM: %2d\n", temp, low, high, therm);
|
|
|
|
if (I2CAccess
|
|
(0x1, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
temp = temp_byte;
|
|
if (I2CAccess
|
|
(0x10, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
temp_low = temp_byte;
|
|
if (I2CAccess
|
|
(0x8, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
low = temp_byte;
|
|
if (I2CAccess
|
|
(0x14, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
low_low = temp_byte;
|
|
if (I2CAccess
|
|
(0x7, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
high = temp_byte;
|
|
if (I2CAccess
|
|
(0x13, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
high_low = temp_byte;
|
|
if (I2CAccess
|
|
(0x19, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
therm = temp_byte;
|
|
if (I2CAccess
|
|
(0x11, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&temp_byte, I2C_READ) != 0) {
|
|
goto fail;
|
|
}
|
|
printf ("Ext Temp : %2d.%03d Low: %2d.%03d High: %2d.%03d THERM: %2d Offset: %2d\n", temp, GET_DECIMAL (temp_low), low, GET_DECIMAL (low_low), high, GET_DECIMAL (high_low), therm, temp_byte);
|
|
break;
|
|
case 'l': /* alter local limits : low, high, therm */
|
|
if (argc < 3) {
|
|
goto usage;
|
|
}
|
|
|
|
/* low */
|
|
if (I2CAccess
|
|
(0xC, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&user_data[0], I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
|
|
if (user_data_count > 1) {
|
|
/* high */
|
|
if (I2CAccess
|
|
(0xB, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&user_data[1], I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
if (user_data_count > 2) {
|
|
/* therm */
|
|
if (I2CAccess
|
|
(0x20, I2C_SENSOR_DEV,
|
|
I2C_SENSOR_CHIP_SEL, &user_data[2],
|
|
I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
}
|
|
break;
|
|
case 'e': /* alter external limits: low, high, therm, offset */
|
|
if (argc < 3) {
|
|
goto usage;
|
|
}
|
|
|
|
/* low */
|
|
if (I2CAccess
|
|
(0xE, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&user_data[0], I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
|
|
if (user_data_count > 1) {
|
|
/* high */
|
|
if (I2CAccess
|
|
(0xD, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&user_data[1], I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
if (user_data_count > 2) {
|
|
/* therm */
|
|
if (I2CAccess
|
|
(0x19, I2C_SENSOR_DEV,
|
|
I2C_SENSOR_CHIP_SEL, &user_data[2],
|
|
I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
if (user_data_count > 3) {
|
|
/* offset */
|
|
if (I2CAccess
|
|
(0x11, I2C_SENSOR_DEV,
|
|
I2C_SENSOR_CHIP_SEL, &user_data[3],
|
|
I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
}
|
|
break;
|
|
case 'c': /* alter config settings: config, conv, cons alert, therm hyst */
|
|
if (argc < 3) {
|
|
goto usage;
|
|
}
|
|
|
|
/* config */
|
|
if (I2CAccess
|
|
(0x9, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&user_data[0], I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
|
|
if (user_data_count > 1) {
|
|
/* conversion */
|
|
if (I2CAccess
|
|
(0xA, I2C_SENSOR_DEV, I2C_SENSOR_CHIP_SEL,
|
|
&user_data[1], I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
if (user_data_count > 2) {
|
|
/* cons alert */
|
|
if (I2CAccess
|
|
(0x22, I2C_SENSOR_DEV,
|
|
I2C_SENSOR_CHIP_SEL, &user_data[2],
|
|
I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
if (user_data_count > 3) {
|
|
/* therm hyst */
|
|
if (I2CAccess
|
|
(0x21, I2C_SENSOR_DEV,
|
|
I2C_SENSOR_CHIP_SEL, &user_data[3],
|
|
I2C_WRITE) != 0) {
|
|
goto fail;
|
|
}
|
|
}
|
|
break;
|
|
default:
|
|
goto usage;
|
|
}
|
|
|
|
goto done;
|
|
fail:
|
|
printf ("Access to sensor failed\n");
|
|
ret_val = -1;
|
|
goto done;
|
|
usage:
|
|
printf ("Usage:\n%s\n", cmdtp->help);
|
|
|
|
done:
|
|
return ret_val;
|
|
}
|
|
|
|
U_BOOT_CMD (temp, 6, 0, do_temp_sensor,
|
|
"temp - interact with the temperature sensor\n",
|
|
"temp [s]\n"
|
|
" - Show status.\n"
|
|
"temp l LOW [HIGH] [THERM]\n"
|
|
" - Set local limits.\n"
|
|
"temp e LOW [HIGH] [THERM] [OFFSET]\n"
|
|
" - Set external limits.\n"
|
|
"temp c CONFIG [CONVERSION] [CONS. ALERT] [THERM HYST]\n"
|
|
" - Set config options.\n"
|
|
"\n"
|
|
"All values can be decimal or hex (hex preceded with 0x).\n"
|
|
"Only whole numbers are supported for external limits.\n");
|
|
|
|
#if 0
|
|
U_BOOT_CMD (loadace, 2, 0, do_loadace,
|
|
"loadace - load fpga configuration from System ACE compact flash\n",
|
|
"N\n"
|
|
" - Load configuration N (0-7) from System ACE compact flash\n"
|
|
"loadace\n" " - loads default configuration\n");
|
|
#endif
|
|
|
|
U_BOOT_CMD (swconfig, 2, 0, do_swconfigbyte,
|
|
"swconfig- display or modify the software configuration byte\n",
|
|
"N [ADDRESS]\n"
|
|
" - set software configuration byte to N, optionally use ADDRESS as\n"
|
|
" location of buffer for flash copy\n"
|
|
"swconfig\n" " - display software configuration byte\n");
|
|
|
|
U_BOOT_CMD (pause, 2, 0, do_pause,
|
|
"pause - sleep processor until any key is pressed with poll time of N seconds\n",
|
|
"N\n"
|
|
" - sleep processor until any key is pressed with poll time of N seconds\n"
|
|
"pause\n"
|
|
" - sleep processor until any key is pressed with poll time of 1 second\n");
|
|
|
|
U_BOOT_CMD (swrecon, 1, 0, do_swreconfig,
|
|
"swrecon - trigger a board reconfigure to the software selected configuration\n",
|
|
"\n"
|
|
" - trigger a board reconfigure to the software selected configuration\n");
|