u-boot/arch/arm/cpu/arm1136/mx31/generic.c
Helmut Raiger fa47a28661 mmc: access mxcmmc from mx31 boards
This patch modifies mxcmmc.c to be used
not only by i.MX27 but also by i.MX31 boards.
Both use the same SD controller, but have different
clock set-ups.
The i.MX27 imx_get_XXXclock functions are made static to
generic.c and a public mxc_get_clock() function
is provided.  Pins, base address and prototypes for
an i.MX31 specific board_init_mmc() are provided.
Some of the i.MX27 clock getters are unused and marked
as such to avoid warnings (./MAKEALL -s mx27), but
the code was left in for future use.

Signed-off-by: Helmut Raiger <helmut.raiger@hale.at>
Acked-by: Stefano Babic <sbabic@denx.de>
2012-02-12 10:11:26 +01:00

230 lines
5 KiB
C

/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/clock.h>
#include <asm/io.h>
#include <asm/arch/sys_proto.h>
static u32 mx31_decode_pll(u32 reg, u32 infreq)
{
u32 mfi = GET_PLL_MFI(reg);
u32 mfn = GET_PLL_MFN(reg);
u32 mfd = GET_PLL_MFD(reg);
u32 pd = GET_PLL_PD(reg);
mfi = mfi <= 5 ? 5 : mfi;
mfd += 1;
pd += 1;
return ((2 * (infreq >> 10) * (mfi * mfd + mfn)) /
(mfd * pd)) << 10;
}
static u32 mx31_get_mpl_dpdgck_clk(void)
{
u32 infreq;
if ((readl(CCM_CCMR) & CCMR_PRCS_MASK) == CCMR_FPM)
infreq = CONFIG_MX31_CLK32 * 1024;
else
infreq = CONFIG_MX31_HCLK_FREQ;
return mx31_decode_pll(readl(CCM_MPCTL), infreq);
}
static u32 mx31_get_mcu_main_clk(void)
{
/* For now we assume mpl_dpdgck_clk == mcu_main_clk
* which should be correct for most boards
*/
return mx31_get_mpl_dpdgck_clk();
}
static u32 mx31_get_ipg_clk(void)
{
u32 freq = mx31_get_mcu_main_clk();
u32 pdr0 = readl(CCM_PDR0);
freq /= GET_PDR0_MAX_PODF(pdr0) + 1;
freq /= GET_PDR0_IPG_PODF(pdr0) + 1;
return freq;
}
/* hsp is the clock for the ipu */
static u32 mx31_get_hsp_clk(void)
{
u32 freq = mx31_get_mcu_main_clk();
u32 pdr0 = readl(CCM_PDR0);
freq /= GET_PDR0_HSP_PODF(pdr0) + 1;
return freq;
}
void mx31_dump_clocks(void)
{
u32 cpufreq = mx31_get_mcu_main_clk();
printf("mx31 cpu clock: %dMHz\n", cpufreq / 1000000);
printf("ipg clock : %dHz\n", mx31_get_ipg_clk());
printf("hsp clock : %dHz\n", mx31_get_hsp_clk());
}
unsigned int mxc_get_clock(enum mxc_clock clk)
{
switch (clk) {
case MXC_ARM_CLK:
return mx31_get_mcu_main_clk();
case MXC_IPG_CLK:
case MXC_IPG_PERCLK:
case MXC_CSPI_CLK:
case MXC_UART_CLK:
case MXC_ESDHC_CLK:
return mx31_get_ipg_clk();
case MXC_IPU_CLK:
return mx31_get_hsp_clk();
}
return -1;
}
u32 imx_get_uartclk(void)
{
return mxc_get_clock(MXC_UART_CLK);
}
void mx31_gpio_mux(unsigned long mode)
{
unsigned long reg, shift, tmp;
reg = IOMUXC_BASE + (mode & 0x1fc);
shift = (~mode & 0x3) * 8;
tmp = readl(reg);
tmp &= ~(0xff << shift);
tmp |= ((mode >> IOMUX_MODE_POS) & 0xff) << shift;
writel(tmp, reg);
}
void mx31_set_pad(enum iomux_pins pin, u32 config)
{
u32 field, l, reg;
pin &= IOMUX_PADNUM_MASK;
reg = (IOMUXC_BASE + 0x154) + (pin + 2) / 3 * 4;
field = (pin + 2) % 3;
l = readl(reg);
l &= ~(0x1ff << (field * 10));
l |= config << (field * 10);
writel(l, reg);
}
void mx31_set_gpr(enum iomux_gp_func gp, char en)
{
u32 l;
struct iomuxc_regs *iomuxc = (struct iomuxc_regs *)IOMUXC_BASE;
l = readl(&iomuxc->gpr);
if (en)
l |= gp;
else
l &= ~gp;
writel(l, &iomuxc->gpr);
}
void mxc_setup_weimcs(int cs, const struct mxc_weimcs *weimcs)
{
struct mx31_weim *weim = (struct mx31_weim *) WEIM_BASE;
struct mx31_weim_cscr *cscr = &weim->cscr[cs];
writel(weimcs->upper, &cscr->upper);
writel(weimcs->lower, &cscr->lower);
writel(weimcs->additional, &cscr->additional);
}
struct mx3_cpu_type mx31_cpu_type[] = {
{ .srev = 0x00, .v = 0x10 },
{ .srev = 0x10, .v = 0x11 },
{ .srev = 0x11, .v = 0x11 },
{ .srev = 0x12, .v = 0x1F },
{ .srev = 0x13, .v = 0x1F },
{ .srev = 0x14, .v = 0x12 },
{ .srev = 0x15, .v = 0x12 },
{ .srev = 0x28, .v = 0x20 },
{ .srev = 0x29, .v = 0x20 },
};
u32 get_cpu_rev(void)
{
u32 i, srev;
/* read SREV register from IIM module */
struct iim_regs *iim = (struct iim_regs *)MX31_IIM_BASE_ADDR;
srev = readl(&iim->iim_srev);
for (i = 0; i < ARRAY_SIZE(mx31_cpu_type); i++)
if (srev == mx31_cpu_type[i].srev)
return mx31_cpu_type[i].v;
return srev | 0x8000;
}
static char *get_reset_cause(void)
{
/* read RCSR register from CCM module */
struct clock_control_regs *ccm =
(struct clock_control_regs *)CCM_BASE;
u32 cause = readl(&ccm->rcsr) & 0x07;
switch (cause) {
case 0x0000:
return "POR";
case 0x0001:
return "RST";
case 0x0002:
return "WDOG";
case 0x0006:
return "JTAG";
default:
return "unknown reset";
}
}
#if defined(CONFIG_DISPLAY_CPUINFO)
int print_cpuinfo(void)
{
u32 srev = get_cpu_rev();
printf("CPU: Freescale i.MX31 rev %d.%d%s at %d MHz.\n",
(srev & 0xF0) >> 4, (srev & 0x0F),
((srev & 0x8000) ? " unknown" : ""),
mx31_get_mcu_main_clk() / 1000000);
printf("Reset cause: %s\n", get_reset_cause());
return 0;
}
#endif