mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
2731b9a866
move to linux usb driver organisation as following drivers/usb/gadget drivers/usb/host drivers/usb/musb Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Remy Bohmer <linux@bohmer.net>
100 lines
2.8 KiB
C
100 lines
2.8 KiB
C
/*
|
|
* (C) Copyright 2008, Excito Elektronik i Sk=E5ne AB
|
|
*
|
|
* Author: Tor Krill tor@excito.com
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <pci.h>
|
|
#include <usb.h>
|
|
#include <mpc83xx.h>
|
|
#include <asm/io.h>
|
|
#include <asm/bitops.h>
|
|
|
|
#include "ehci.h"
|
|
#include "ehci-fsl.h"
|
|
#include "ehci-core.h"
|
|
|
|
/*
|
|
* Create the appropriate control structures to manage
|
|
* a new EHCI host controller.
|
|
*
|
|
* Excerpts from linux ehci fsl driver.
|
|
*/
|
|
int ehci_hcd_init(void)
|
|
{
|
|
volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
|
|
uint32_t addr, temp;
|
|
|
|
addr = (uint32_t)&(im->usb[0]);
|
|
hccr = (struct ehci_hccr *)(addr + FSL_SKIP_PCI);
|
|
hcor = (struct ehci_hcor *)((uint32_t) hccr +
|
|
HC_LENGTH(ehci_readl(&hccr->cr_capbase)));
|
|
|
|
/* Configure clock */
|
|
clrsetbits_be32(&(im->clk.sccr), MPC83XX_SCCR_USB_MASK,
|
|
MPC83XX_SCCR_USB_DRCM_11);
|
|
|
|
/* Confgure interface. */
|
|
temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
|
|
out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp
|
|
| REFSEL_16MHZ | UTMI_PHY_EN);
|
|
|
|
/* Wait for clock to stabilize */
|
|
do {
|
|
temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
|
|
udelay(1000);
|
|
} while (!(temp & PHY_CLK_VALID));
|
|
|
|
/* Set to Host mode */
|
|
temp = in_le32((void *)(addr + FSL_SOC_USB_USBMODE));
|
|
out_le32((void *)(addr + FSL_SOC_USB_USBMODE), temp | CM_HOST);
|
|
|
|
out_be32((void *)(addr + FSL_SOC_USB_SNOOP1), SNOOP_SIZE_2GB);
|
|
out_be32((void *)(addr + FSL_SOC_USB_SNOOP2),
|
|
0x80000000 | SNOOP_SIZE_2GB);
|
|
|
|
/* Init phy */
|
|
/* TODO: handle different phys? */
|
|
out_le32(&(hcor->or_portsc[0]), PORT_PTS_UTMI);
|
|
|
|
/* Enable interface. */
|
|
temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
|
|
out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp | USB_EN);
|
|
|
|
out_be32((void *)(addr + FSL_SOC_USB_PRICTRL), 0x0000000c);
|
|
out_be32((void *)(addr + FSL_SOC_USB_AGECNTTHRSH), 0x00000040);
|
|
out_be32((void *)(addr + FSL_SOC_USB_SICTRL), 0x00000001);
|
|
|
|
/* Enable interface. */
|
|
temp = in_be32((void *)(addr + FSL_SOC_USB_CTRL));
|
|
out_be32((void *)(addr + FSL_SOC_USB_CTRL), temp | USB_EN);
|
|
|
|
temp = in_le32((void *)(addr + FSL_SOC_USB_USBMODE));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Destroy the appropriate control structures corresponding
|
|
* the the EHCI host controller.
|
|
*/
|
|
int ehci_hcd_stop(void)
|
|
{
|
|
return 0;
|
|
}
|