u-boot/board/armltd/vexpress64/vexpress64.c
Peter Hoyes 439581dca4 vexpress64: Enable VIRTIO_NET network driver
The SMSC driver is using the old driver model.

Init the virtio system in vexpress64.c so that the network device is
discovered.

Signed-off-by: Peter Hoyes <Peter.Hoyes@arm.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
2022-01-04 22:48:48 -05:00

201 lines
4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* (C) Copyright 2013
* David Feng <fenghua@phytium.com.cn>
* Sharma Bhupesh <bhupesh.sharma@freescale.com>
*/
#include <common.h>
#include <cpu_func.h>
#include <dm.h>
#include <init.h>
#include <malloc.h>
#include <errno.h>
#include <net.h>
#include <netdev.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <linux/compiler.h>
#include <dm/platform_data/serial_pl01x.h>
#include "pcie.h"
#include <asm/armv8/mmu.h>
#ifdef CONFIG_VIRTIO_NET
#include <virtio_types.h>
#include <virtio.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
static const struct pl01x_serial_plat serial_plat = {
.base = V2M_UART0,
.type = TYPE_PL011,
.clock = CONFIG_PL011_CLOCK,
};
U_BOOT_DRVINFO(vexpress_serials) = {
.name = "serial_pl01x",
.plat = &serial_plat,
};
static struct mm_region vexpress64_mem_map[] = {
{
.virt = 0x0UL,
.phys = 0x0UL,
.size = 0x80000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_DEVICE_NGNRNE) |
PTE_BLOCK_NON_SHARE |
PTE_BLOCK_PXN | PTE_BLOCK_UXN
}, {
.virt = 0x80000000UL,
.phys = 0x80000000UL,
.size = 0xff80000000UL,
.attrs = PTE_BLOCK_MEMTYPE(MT_NORMAL) |
PTE_BLOCK_INNER_SHARE
}, {
/* List terminator */
0,
}
};
struct mm_region *mem_map = vexpress64_mem_map;
/* This function gets replaced by platforms supporting PCIe.
* The replacement function, eg. on Juno, initialises the PCIe bus.
*/
__weak void vexpress64_pcie_init(void)
{
}
int board_init(void)
{
vexpress64_pcie_init();
#ifdef CONFIG_VIRTIO_NET
virtio_init();
#endif
return 0;
}
int dram_init(void)
{
gd->ram_size = PHYS_SDRAM_1_SIZE;
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
#ifdef PHYS_SDRAM_2
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = PHYS_SDRAM_2_SIZE;
#endif
return 0;
}
/* Assigned in lowlevel_init.S
* Push the variable into the .data section so that it
* does not get cleared later.
*/
unsigned long __section(".data") prior_stage_fdt_address;
#ifdef CONFIG_OF_BOARD
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
#define JUNO_FLASH_SEC_SIZE (256 * 1024)
static phys_addr_t find_dtb_in_nor_flash(const char *partname)
{
phys_addr_t sector = CONFIG_SYS_FLASH_BASE;
int i;
for (i = 0;
i < CONFIG_SYS_MAX_FLASH_SECT;
i++, sector += JUNO_FLASH_SEC_SIZE) {
int len = strlen(partname) + 1;
int offs;
phys_addr_t imginfo;
u32 reg;
reg = readl(sector + JUNO_FLASH_SEC_SIZE - 0x04);
/* This makes up the string "HSLFTOOF" flash footer */
if (reg != 0x464F4F54U)
continue;
reg = readl(sector + JUNO_FLASH_SEC_SIZE - 0x08);
if (reg != 0x464C5348U)
continue;
for (offs = 0; offs < 32; offs += 4, len -= 4) {
reg = readl(sector + JUNO_FLASH_SEC_SIZE - 0x30 + offs);
if (strncmp(partname + offs, (char *)&reg,
len > 4 ? 4 : len))
break;
if (len > 4)
continue;
reg = readl(sector + JUNO_FLASH_SEC_SIZE - 0x10);
imginfo = sector + JUNO_FLASH_SEC_SIZE - 0x30 - reg;
reg = readl(imginfo + 0x54);
return CONFIG_SYS_FLASH_BASE +
reg * JUNO_FLASH_SEC_SIZE;
}
}
printf("No DTB found\n");
return ~0;
}
#endif
void *board_fdt_blob_setup(int *err)
{
#ifdef CONFIG_TARGET_VEXPRESS64_JUNO
phys_addr_t fdt_rom_addr = find_dtb_in_nor_flash(CONFIG_JUNO_DTB_PART);
*err = 0;
if (fdt_rom_addr == ~0UL) {
*err = -ENXIO;
return NULL;
}
return (void *)fdt_rom_addr;
#endif
#ifdef VEXPRESS_FDT_ADDR
if (fdt_magic(VEXPRESS_FDT_ADDR) == FDT_MAGIC) {
*err = 0;
return (void *)VEXPRESS_FDT_ADDR;
}
#endif
if (fdt_magic(prior_stage_fdt_address) == FDT_MAGIC) {
*err = 0;
return (void *)prior_stage_fdt_address;
}
*err = -ENXIO;
return NULL;
}
#endif
/* Actual reset is done via PSCI. */
void reset_cpu(void)
{
}
/*
* Board specific ethernet initialization routine.
*/
int board_eth_init(struct bd_info *bis)
{
int rc = 0;
#ifndef CONFIG_DM_ETH
#ifdef CONFIG_SMC91111
rc = smc91111_initialize(0, CONFIG_SMC91111_BASE);
#endif
#ifdef CONFIG_SMC911X
rc = smc911x_initialize(0, CONFIG_SMC911X_BASE);
#endif
#endif
return rc;
}